Recent Discussions
Questions Regarding New CSP Authorization Enforcement Policies
I have the following questions about the scenario in which a direct bill partner does not meet the new requirements at the CSP tenant anniversary date: Restricted Status vs. Suspension/Revocation: Until recently, official documents indicated that at T+0, a direct bill partner would move to "Restricted" status, allowing them to continue billing and renewing existing customers, but not create new customers or subscriptions, for an indefinite period. This also allowed a reasonable timeframe for transition to indirect CSP. Now, the new enforcement policies state that at T+30, the tenant is placed in "Suspended" status, and at T+60, it is "Revoked," with no further possibility to operate on active customers and their subscriptions—even in cases where subscriptions have already been paid for annual or annual/monthly contracts. Could you clarify the reason for this change and the rationale behind the new, stricter enforcement timeline? Customer Transition Feasibility: How does Microsoft expect all customers to be transferred to an indirect provider within just 30–60 days after T+0? Is there any support or guidance for partners to manage such a rapid transition? Because in my opinion is not feasible and could be a potential risk to loose customers business. Prepaid Subscriptions: Even if it were possible to transfer all customers within the required timeframe, has Microsoft considered that many of these subscriptions have already been prepaid for an entire year or are in the middle of an annuality with monthly payments by the direct bill partner to Microsoft? We appreciate your attention to these concerns and look forward to your guidance on how to best manage compliance and customer impact under the new policies. My personal opinion is that is immediately necessary to restore the process as before with the Restricted Status if Direct Bill are not satisfied and give time (one year) to the partner to move to indirect provider all the customers/subscriptions. Thank you in advance for your support.
I linked my Microsoft Partner University account (email address removed for privacy reasons ) to my personal Microsoft account
my company admin has noticed that in the Microsoft Partner Center > Skilling > Intermediate report, my name is not appearing under the Azure Administration section. Even though I have completed the required learning activities and linked my Microsoft Partner University account (examplemailto:email address removed for privacy reasons) with my personal Microsoft account (mailto:email address removed for privacy reasons), my name is still not reflecting in the Partner Center reports. Could you please tell what is the issue and help resolve this issue? Thank you for your assistance and support. Best regards, Amar
Achievement Code are not correctly reflecting in the Partner Center
Our organization's Achievement Code completion score are not accurately reflecting in the Partner Center for Qualification for Training Services. Been getting the URL from Courseware Title Plan (with Partner Location ID), generate the Achievement Code URL, follow all the procedure strictly. Kindly advice.
Your front row seat to Ultimate Partner® LIVE starts now!
In just a few days, Ultimate Partner® LIVE goes live from Reston, VA with its most impactful agenda yet. Top performing partners including Veeam, Accenture, Carahsoft, Cisco, SHI, ServiceNow, Commvault, and Siemens will share how they've overcome challenges and built lasting success. Microsoft experts will also join for candid, unscripted conversations about what it really takes to thrive in today's Hyperscaler ecosystems. The entire event will be streamed live for free — making partner mastery accessible to everyone. Join the livestream. Be inspired. Become the Ultimate Partner. October 28th Livestream October 29th Livestream
Different documents have company names in different languages
Hi, My account is stuck at Employment verification stage, the customer support mentioned that I failed domain verification. I've seen some discussion about failed in verification because of different company name, so maybe I can get some help here. This is my situation: 1. the name I registered in my Microsoft partner is in English; 2. the name in domain profile and documents is in English; 3. the name in official business document is in Chinese; The names in different languages have the same meaning, and I'm hoping to figure out if this is causing my validation to fail, as I've failed four or five times without getting a specific reason. Thanks all.Partner Center account deactivated – unable to access Hardware Program dashboard
Hello Microsoft Partner Center Support Team, We are currently unable to access the Microsoft Hardware Developer Dashboard through Partner Center. Below is a summary of the issue and actions we have already taken. --- Purpose We have encountered an access issue when attempting to use the Microsoft Partner Center Hardware Developer Program. The purpose of this message is to request confirmation of our Partner Center account status and reactivation of our Hardware Program registration, or guidance on re-enrolling if required. --- Sequence of Events (Steps to Reproduce) We attempted to access the Microsoft Hardware Developer Dashboard via the following URL: https://partner.microsoft.com/ja-jp/dashboard/Registration/Hardware After signing in to Partner Center, the “Hardware” option appeared in the list of available programs. However, it could not be selected, and the following message was displayed: Hardware Manufacture devices, parts and equipments. Create and manage system and driver submissions. Our records indicate that you have already enrolled into this program but your program registration is deactivated. Subsequently, when attempting to access the Partner Center dashboard, the following error message was displayed: Access restricted – your Partner Center account has been deactivated. --- Additional Information The following details were displayed on the Partner Center dashboard at the time the above error occurred. - Organization name: Sunny Giken Co., Ltd. - Tenant domain: sunnygiken.co.jp - Primary account email: email address removed for privacy reasons - Approx. registration date: August–September 2018 - Error Correlation ID (from screenshot): cac6e9b-5a09-471a-ada7-b8fc0231a78a - Correlation vector: UyZ59dYHRm0KoRkY.3 - Time (UTC): 17 Oct 2025 08:19:26 +00:00 --- Actions Taken - We sent an inquiry email to `email address removed for privacy reasons`, but have not yet received a response. - We also attempted to contact `email address removed for privacy reasons`, but that address appears to have been deactivated (SMTP 550 5.4.1). - The Services Hub support form (supportforbusiness) could not complete submission due to a looping issue. --- Request We kindly request verification of our Partner Center account status and Hardware Program registration. If our organization’s registration has been deactivated, please advise on the procedure to reactivate or re-enroll under our current tenant. --- Thank you very much for your assistance. Best regards, Tetsuya Ozawa Sunny Giken Co., Ltd. email address removed for privacy reasonsHot to notice my webinar(online seminar)?
I am a marketer of #TDG, co. ltd. TDG is one of partners of MS in South Korea. I am preparing #webinar to introduce TDG's new HR solution for #Microsoft 365 on November, 2025. And I've found this #MS community today. Hot to notice #MS partners my webinar(online seminar) to people via this community? Like follows screenshot. Or any some other ways are needed!I have a question about upcoming FY26 on the Distributor side minimum of 30 million USD TTM billed.
I am in Tie Distribution, distributing in Thailand. i see New Update What does this mean, please elaborate. I want to know how the revenue is calculated and is the minimum really 30 million USD? How can I check how much the current amount is? How is the TTM billed CSP revenue measured, and where can we view our historical data?Updated Achievement Code Documentation
We have updated our Achievement Code documentation to clarify and consolidate. This document contains info on: Onboarding to a Microsoft Learn admin account that allows your organization to generate achievement codes How to generate achievement codes The redeeming experience for the learner / customer Support resources While this resource will be more pertinent to new TSPs, it does contain information related to many of the questions we receive on the topic. If you are seeking information that this document does not provide, please drop a note on this thread and we can explore adding more detail. The document will be available in the coming days in the Get Started collection. As I'm still having issues adding attachments to these forum posts, please find the document in September's Community Call shared folder for the time being. I will update this thread with a new location when available.i have a Question FY26 Indirect reseller security score Can't access it.
I must say that I am a Distributor and my Partners do not have access to the Security page and I want to make sure that they can access it. From what I have found, it only says that it is enforced for direct bill partners, distributors (formerly indirect provider), and indirect resellers. Can you please update this because the FY26 document requires that you Complete the mandatory requirements of the Partner Center security score. Please provide clarity on compliance with the Security requirements. FY26 When I click on the link Adn i see in Security Role i Not see Indirect reseller access On Partner Center Indirect reseller Can't access Even if they are Global Admins, they cannot access it.Pending Oct 1 Direct Bill requirement changes.
Has anyone figured out a way to move Azure Plan subscriptions from Direct CSP to Indirect CSP without incurring customer downtime? Microsofts stance on this is absurd. Move and rebuild resources in a new Azure Plan subscription because technically Microsoft cannot reassign billing and they cornered all their new as of last year direct bill partners into tripling their revenue in 5 months with their May 2025 announcement. (300k to 1M) My clients have resources deployed that are supported but discontinued for new deployments and have global resources that cannot be subscription moved. None of this work was planned in their development budgets. I'm supposed to give them an extended, unplanned downtime so that their subscriptions are not locked due to these new Direct bill requirements. Every part of this move requires downtime in operations that was not requested by my customers. They will not look at the business continuity outage Microsoft is causing them favorably. Has anyone made any headway towards a reasonable solution to the problem. Thanks Derek LicciardiSharePoint Embedded guide for software companies
Looking to accelerate your SaaS solution with SharePoint Embedded? This new blog post breaks down key success factors, positioning strategies, and how to align your architecture for maximum impact. Read the full article here: SharePoint Embedded guide for software companies: success factors, positioning & key insights | Microsoft Community HubUpdated Oct 1: SOLVED (partial): Issue with Achievement Code Creation
October 1 Update: If the achievement code button is still not working for you, please send me a direct message with your company name and the email address you're using to access the Learn Admin account. To send me a direct message, click on my name / icon. Please do not post personally identifiable information in the forum itself. Thank you. September 23 Update: the vast majority of partners have reported that they have regained access to achievement codes. However, based on some of the comments in this thread not everyone has seen a fix. First, please follow the steps regarding the hard refresh below. We have had some partners that said they still couldn't access codes after the fix and when we had them follow the refresh steps all was good again. If that still hasn't fixed the problem, I recommend creating a new admin account on Learn. You can find the documents for that here. Once you complete the process it takes about a day for the admin account to be provisioned. I know it's a workaround, but you should regain access quicker than if we wait for a fix on the old accounts. At the same time, I do want to report to the team those accounts that still cannot access so they can determine the root cause. Please send me a direct message (click on my name / icon from any post) and let me know the email address that you are using for Learn admin that still does not have access and approximately how long you've been using that admin account. I want to understand if this remaining issue is weighted toward newer users or those that have been leveraging achievement codes for a long time. Thank you. ____________ September 11 Update #2 : we have confirmed the reappearance of the achievement code button in handful of partner accounts. We are optimistic that this has been applied to all partner accounts but still want to gather data before we claim a total fix. Please check to see if your account has regained access to the achievement code button If you still do not see it, please try these steps Close all browser windows Open a new browser and go to https://learn.microsoft.com Sign in using your Outlook.com Class Administrator account Navigate to a course or learning path detail page Perform a hard refresh (Ctrl + F5) If it still does not work, please add a reply to this thread so that we can continue to evaluate any access gaps. September 11 Update: it is apparent that this achievement code outage is now impacting most, if not all, Training Services Partners. The engineering team is working to identify where and how the issue grew so that we can properly plan a fix. Based on my knowledge of the situation this is a fix that will come in days, not hours. I will continue to update this thread each business day until we get all achievement codes back online. September 5 Update: Engineering is progressing on a fix. The soonest we would see proper functionality is end of next week (around the 12th). I will provide an additional update then. August 27 Update: Engineering is working on this and the right people are involved. Not to get too into the weeds, but it's a database migration issue across two distinct teams. They understand the urgency, and I'll bring you more updates as soon as I receive them. August 14 Update: The issue has been identified. I do not yet have a time to resolution to share but will update here when I know more. August 8 Update: We are aware there is an issue with newly onboarded partners attempting to access achievement codes for the first time. We are working on the issue but do not currently have timing on a solution. I will update here when more information becomes available. Thanks.
Events
in 15 hours
🚨 Are you a Microsoft Partner that is interested in data and analytics? Then you won't want to miss our next Fabric Engineering Connection call - Spooktacular Edition! 👻🎃 We are summoning the Data...
Online
in 1 day
🚨 Are you a Microsoft partner that is interested in data and analytics? Then you won't want to miss our next Fabric Engineering Connection call - Spooktacular Edition! 👻🎃 We are summoning the Data...
Online
Recent Blogs
- Every organization is looking for quicker insights, stronger security, and new ways to drive innovation with AI. The real challenge lies in connecting and preparing the data that makes those outcomes...Oct 28, 2025
- 2 MIN READWhat if every department in a financial services firm had its own AI assistant—one that could summarize documents, automate workflows, and deliver real-time insights? That’s the kind of transformat...Oct 28, 2025
