FIX - Outlook 2013,2016,2019 fails open mailbox Exchange 2019 on-prem in offline LAN
Exchange 2019 on-prem + Outlook 2013/2016/2019 in offline LAN Symptoms: - OWA works - ECP works - Autodiscover works - Test-MAPIConnectivity is successful - Outlook profile can be created - Outlook fails to open the mailbox / “Cannot start Microsoft Outlook” / “The set of folders cannot be opened” / “The attempt to log on to Microsoft Exchange has failed” - Environment has no internet connection Root cause: The Windows client had a default gateway configured, but the gateway IP did not respond to ping. In our case the client received 192.168.1.1 as default gateway, but this IP was unreachable in the offline network. Fix: Set the client default gateway to an existing reachable IP address, for example the Exchange/DC server IP 192.168.1.5. Internet access is not required, but the default gateway must be reachable/responding. After changing: Default gateway: 192.168.1.5 DNS: 192.168.1.5 mail/autodiscover DNS or hosts pointing to Exchange 2019 Result: Outlook 2013, Outlook 2016 and Outlook 2019 connected to Exchange 2019 successfully.
Sharepoint 2016 certificat expiration
Hello, We are running a SharePoint 2016 farm composed of: 2 Database Servers 1 App Server 1 Search Server 1 Web Front-End Server 1 Office Online Server After checking the environment, I noticed that only the Web Front-End server is using the certificate that will expire in June. The App Server is using an old expired certificate, the Search Server is configured only with HTTP, and the Office Online Server is using a different certificate. Is there any documented procedure describing the steps required to renew the expired certificates in a SharePoint 2016 farm and on which server we should install the new certificat ? We are using Microsoft CA for certificate management.
Exchange 2016 Decommission
Hi all, I am trying to decom my 2016 environment and cannot disable (Disable-Mailbox) the final 16 mailboxes (out of thousands). Am getting the error Active directory response: 00002098: SecErr: DSID-03150A45, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0. I have been troubleshooting this for HOURS now. It's not enabling inheritance on the user perms (every article suggests that). The perm exchange trusted subsystem isn't there. The users do not have any admin groups. It's nothing that I can find in the first 6 pages of googling. Sadly, of course, there is no support anymore so can't even raise a ticket. Can't uninstall Exchange with mailboxes left :( Any idea's are more than welcome, please. Thank you.Preserving permissions during EXO migration
Hi, Can you help me understand the outcome of preserving the permissions in our scenario. Exchange Server 2016 (soon Exchange SE) in a hybrid with Exchange Online. We are moving 75% of the mailboxes to Exchange Online. What ways will preserve or break the full-access or sendas permissions? I guess best way would be to migrate both the user and the shared mailbox at the same time in the same batch to keep the permission? If we migrate the user in batch 1 and shared mailbox in batch 2 will that preserve/break the full access/send as? If we migrate the shared mailbox in batch 1 and usermailbox in batch 2 will that preserve/break the full access/send as? If the permission is linked directly on the shared mailbox or via a security group is there a difference? Thanks!
Automating SharePoint Site Status Reporting with PowerShell
Introduction Migrating Microsoft 365 workloads is a critical step during organizational transitions such as mergers or de‑mergers. SharePoint site collections often contain business‑critical data, and ensuring visibility into their readiness is essential for a smooth migration. To address this, I developed a PowerShell script that automatically generates a SharePoint Site Status Report, categorizing sites into Active, Read‑Only, and Offline. This report provides administrators and migration engineers with actionable insights to plan and execute migrations confidently. Why This Matters Visibility: Quickly assess site readiness across all web applications. Governance: Ensure compliance and proper access controls. Efficiency: Automate reporting to reduce manual effort. Risk Mitigation: Identify offline or read‑only sites before migration. How It Works The script leverages the SharePoint Management Shell and runs under the Farm Account with elevated permissions. It performs the following steps: Loads SharePoint cmdlets. Iterates through all web applications. Categorizes sites into Active, Read‑Only, and Offline. Compiles results into a structured CSV/Excel/HTML report. Sends the report via email to stakeholders. Key PowerShell Cmdlets Add-PSSnapin Microsoft.SharePoint.PowerShell Get-SPWebApplication Get-SPSite -WebApplication -Limit All $site.ReadOnly / $site.Status Export-Csv Send-MailMessage Parameters to Replace Before running the script, update these placeholders: SMTP Server → mail.company.com → replace with your mail server Sender Address ($from) → email address removed for privacy reasons → replace with reporting account Recipient Address ($to) → email address removed for privacy reasons → replace with stakeholder distribution list Email Subject ($subject) → "SharePoint Site Status Report" → customize for clarity Report File Path ($csvPath) → C:\Reports\SharePoint_SiteStatusReport.csv → replace with desired location Web Application URLs → ensure correct farm references Execution Context → must run under Farm Account Conclusion This automated reporting solution provides clarity, governance, and efficiency during SharePoint migrations. By categorizing sites and delivering structured reports, administrators can prioritize tasks, mitigate risks, and ensure a seamless transition to Microsoft 365. Code: #Adding Snapin for SharePoint #Add-PSSnapin Microsoft.SharePoint.Powershell -ErrorAction SilentlyContinue $TodayDate =Get-Date Write-Host $TodayDate $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } ##My Connect # $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # # WebSites $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # ##Websites # $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # ## Websites # $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # ##FGC-SalesShareWebSites # $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } ##WebSites # $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } ##WebSites # $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } ##WebSites # $FileName = "C:\Results_Active_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_Readonly_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } # $FileName = "C:\Results_NoAccess_WebSites.txt" if (Test-Path $FileName) { Remove-Item $FileName } Add-PSSnapin Microsoft.SharePoint.Powershell [string[]]$WebapplicationList = "" Foreach($Webapp in $WebapplicationList) { Write-Host $Webapp $displaywebappname=Get-SPWebApplication $webapp $webappname=$displaywebappname.name Write-Host $webappname $Sites = Get-SPWebApplication $webapp | Get-SPSite -limit all | foreach { if ($_.ReadOnly -eq $false -and $_.ReadLocked -eq $false -and $_.WriteLocked -eq $false) { $Result =”Site is Active” $save2= "Results_Active_${webappname}.txt" #Write-Host $save2 $saveCSVactive="Results_Active_${webappname}.csv" $_.RootWeb.Title +”`t” + $_.URL + “`t” + $Result | Out-File $save2 -append #$_.RootWeb.Title +”`t” + $_.URL + “`t” + $Result | Out-File $saveCSVactive -Append } elseif ($_.ReadOnly -eq $true -and $_.ReadLocked -eq $false -and $_.WriteLocked -eq $true) { $Result = “Site is Read-Only” $save1= "Results_Readonly_${webappname}.txt" $_.RootWeb.Title +”`t” + $_.URL + “`t” + $Result | Out-File $save1 -Append } elseif ($_.ReadOnly -eq $null -and $_.ReadLocked -eq $null -and $_.WriteLocked -eq $null) { $Result=”Site status is No Access” $save3= "Results_NoAccess_${webappname}.txt" #$_.RootWeb.Title +”`t” + $_.URL + “`t” + $Result | Out-File $save3 -Append $_.URL +”`t” + $_.RootWeb.Title + “`t” + $Result | Out-File $save3 -Append } } } $TodayDate =Get-Date Write-Host $TodayDate sleep -Seconds 100 #Active Sites WebSites $ActiveSites_Websites= Get-Content -Path "C:\Results_Active_WebSites.txt" | Measure-Object Write-Host "Websites Active sites" $ActiveSites_Websites.count $Websites_ActiveSitescount = $ActiveSites_Websites.count #Read-only Sites WebSites $ReadonlySites_Websites=Get-Content -Path "C:\Results_Readonly_WebSites.txt" | Measure-Object Write-Host "Websites Read-only Sites" $ReadonlySites_Websites.count $Websites_Readonlysitescount=$ReadonlySites_Websites.count #No-Access Sites WebSites $NoaccessSies_Websites= Get-Content -Path "C:\Results_NoAccess_WebSites.txt" | Measure-Object Write-Host "Websites No-Access Sites" $NoaccessSies_Websites.count $Websites_NoAccessSitesCount=$NoaccessSies_Websites.count #Active Sites WebSites $ActiveSites_WebSites= Get-Content -Path "C:\Results_Active_WebSites.txt" | Measure-Object Write-Host "WebSites Active sites" $ActiveSites_WebSites.count $WebSites_ActiveSitescount = $ActiveSites_WebSites.count #Read-only Sites WebSites #$Readonlysite_WebSites =Get-Content -Path C:\Results_Readonly_Websites.txt | Measure-Object #If($Readonlysite_WebSites -eq $null) #{ #$WebSites_Readonlysitecount ="0" #} #else{ $Readonlysite_WebSites =Get-Content -Path "C:\Results_Readonly_WebSites.txt" | Measure-Object Write-Host "WebSites Readonly Sites" $Readonlysite_WebSites.count $WebSites_ReadonlySitesCount= $Readonlysite_WebSites.count # Write-Host $WebSites_ReadonlySitesCount #} #WebSites - No Access Sites #$NoAccessSites_WebSites= Get-Content -Path "C:\Results_NoAccess_Websites.txt" $NoAccessSites_WebSites= Get-Content -Path "C:\Results_NoAccess_WebSites.txt" | Measure-Object Write-Host "WebSites NoAccess Sites" $NoAccessSites_WebSites.count # #Write-Host "Site Count $($NoAccessSites_WebSites.Count)" $WebSites_NoAccessSitesCount= $NoAccessSites_WebSites.count ################################################################## # #Active Sites Websites $ActiveSites_WebSites= Get-Content -Path "C:\Results_Active_Websites.txt" | Measure-Object Write-Host "WebSites Active sites" $ActiveSites_WebSites.count $WebSites_ActiveSitescount = $ActiveSites_WebSites.count # # #Read-only Sites WebSites $ReadonlySites_WebSites=Get-Content -Path "C:\Results_Readonly_Websites.txt" | Measure-Object Write-Host "WebSites Read-only Sites" $ReadonlySites_WebSites.count $WebSites_Readonlysitescount=$ReadonlySites_WebSites.count # # #No-Access Sites WebSites $NoaccessSies_WebSites= Get-Content -Path "C:\Results_NoAccess_Websites.txt" | Measure-Object Write-Host "WebSites No-Access Sites" $NoaccessSies_WebSites.count $WebSites_NoAccessSitesCount=$NoaccessSies_WebSites.count # # #Active Sites Websites $ActiveSites_WebSites= Get-Content -Path "C:\Results_Active_Websites.txt" | Measure-Object Write-Host "WebSites Active sites" $ActiveSites_WebSites.count $WebSites_ActiveSitescount = $ActiveSites_WebSites.count # # #Read-only Sites WebSites $ReadonlySites_WebSites=Get-Content -Path "C:\Results_Readonly_Websites.txt" | Measure-Object Write-Host "WebSites Read-only Sites" $ReadonlySites_WebSites.count $WebSites_Readonlysitescount=$ReadonlySites_WebSites.count # # #No-Access Sites WebSites $NoaccessSies_WebSites= Get-Content -Path "C:\Prod\Results_NoAccess_Websites.txt" | Measure-Object Write-Host "WebSites No-Access Sites" $NoaccessSies_WebSites.count $WebSites_NoAccessSitesCount=$NoaccessSies_WebSites.count # # #WebSites # # #Active Sites WebSites ##$ActiveSites_WebSites= Get-Content -Path "C:\Results_Active_WebSites.txt" | Measure-Object ##Write-Host "WebSites Active sites" $ActiveSites_WebSites.count ##$WebSites_ActiveSitescount = $ActiveSites_WebSites.count # # #Read-only Sites WebSites ##$ReadonlySites_WebSites=Get-Content -Path "C:\Results_Readonly_WebSites.txt" | Measure-Object ##Write-Host "WebSites Read-only Sites" $ReadonlySites_WebSites.count ##$WebSites_Readonlysitescount=$ReadonlySites_WebSites.count # # #No-Access Sites WebSites ##$NoaccessSies_WebSites= Get-Content -Path "C:\Results_NoAccess_WebSites" | Measure-Object ##Write-Host "WebSites No-Access Sites" $NoaccessSies_WebSites.count ##$WebSites_NoAccessSitesCount=$NoaccessSies_WebSites.count # # #WebSites # # #Active Sites WebSites ##$ActiveSites_WebSites= Get-Content -Path "C:\Results_Active_WebSites.txt" | Measure-Object ##Write-Host "WebSites Active sites" $ActiveSites_WebSites.count ##$WebSites_ActiveSitescount = $ActiveSites_WebSites.count # # #Read-only Sites WebSites ##$ReadonlySites_WebSites=Get-Content -Path "C:\Results_Readonly_WebSites.txt" | Measure-Object ##Write-Host "WebSites Web Read-only Sites" $ReadonlySites_WebSites.count ##$WebSites_Readonlysitescount=$ReadonlySites_WebSites.count # # #No-Access Sites WebSites ##$NoaccessSies_WebSites= Get-Content -Path "C:\Results_NoAccess_WebSites.txt" | Measure-Object ##Write-Host "WebSites Web No-Access Sites" $NoaccessSies_WebSites.count ##$WebSites_NoAccessSitesCount=$NoaccessSies_WebSites.count # # #Websites # # #Active Sites Websites ##$ActiveSites_Websites= Get-Content -Path "C:\Results_Active_WebSites.txt" | Measure-Object ##Write-Host "Websites Active sites" $ActiveSites_Websites.count ##$Websites_ActiveSitescount = $ActiveSites_Websites.count # # #Read-only Sites Websites ##$ReadonlySites_Websites=Get-Content -Path "C:\Results_Readonly_WebSites.txt" | Measure-Object ##Write-Host "Websites Read-only Sites" $ReadonlySites_Websites.count ##$Websites_Readonlysitescount=$ReadonlySites_Websites.count # # #No-Access Sites Websites ##$NoaccessSies_Websites= Get-Content -Path "C:\Results_NoAccess_WebSites.txt" | Measure-Object ##Write-Host "Websites No-Access Sites" $NoaccessSies_Websites.count ##$Websites_NoAccessSitesCount=$NoaccessSies_Websites.count # # #Websites # # #Active Sites Websites ##$ActiveSites_Websites= Get-Content -Path "C:\Results_Active_WebSites.txt" | Measure-Object ##Write-Host "Websites Active sites" $ActiveSites_Websites.count ##$Websites_ActiveSitescount = $ActiveSites_Websites.count # # #Read-only Sites Websites ##$ReadonlySites_Websites=Get-Content -Path "C:\Results_Readonly_WebSites.txt" | Measure-Object ##Write-Host "Websites Read-only Sites" $ReadonlySites_Websites.count ##$Websites_Readonlysitescount= $ReadonlySites_Websites.count # # #No-Access Sites Websites ##$NoaccessSies_Websites= Get-Content -Path "C:\Results_NoAccess_WebSites.txt" | Measure-Object ##Write-Host "Websites No-Access Sites" $$NoaccessSies_Websites.count ##$Websites_NoAccessSitesCount=$NoaccessSies_Websites.count # # #Websites # # #Active Sites Websites ##$ActiveSites_Websites= Get-Content -Path "C:\Results_Active_WebSites.txt" | Measure-Object ##Write-Host "Websites Active sites" $ActiveSites_Websites.count ##$Websites_ActiveSitescount = $ActiveSites_Websites.count # # #Read-only Sites Websites ##$ReadonlySites_Websites=Get-Content -Path "C:\Results_Readonly_WebSites.txt" | Measure-Object ##Write-Host "Websites Read-only Sites" $ReadonlySites_Websites.count ##$Websites_Readonlysitescount=$ReadonlySites_Websites.count # # #No-Access Sites Websites ##$NoaccessSies_Websites= Get-Content -Path "C:\Results_NoAccess_WebSites.txt" | Measure-Object ##Write-Host "Websites No-Access Sites" $NoaccessSies_Websites.count ##$Websites_NoAccessSitesCount=$NoaccessSies_Websites.count # #WebSites # # #Active Sites Websites ##$ActiveSites_Websites= Get-Content -Path "C:\Results_Active_WebSites.txt" | Measure-Object ##Write-Host "Websites Active sites" $ActiveSites_Websites.count ##$Websites_ActiveSitescount = $ActiveSites_Websites.count # # #Read-only Sites Websites ##$ReadonlySites_Websites= Get-Content -Path "C:\Results_Readonly_WebSites.txt" | Measure-Object ##Write-Host "Websites Read-only Sites" $ReadonlySites_Websites.count ##$Websites_Readonlysitescount=$ReadonlySites_Websites.count # # #No-Access Sites Websites ##$NoaccessSies_Websites= Get-Content -Path "C:\Results_NoAccess_WebSites.txt" | Measure-Object ##Write-Host "Websites No-Access Sites" $NoaccessSies_Websites.count ##$Websites_NoAccessSitesCount=$NoaccessSies_Websites.count # #WebSites # # #Active Sites Websites ##$ActiveSites_Websites= Get-Content -Path "C:\Results_Active_WebSites.txt" | Measure-Object ##Write-Host "Websites Active sites" $ActiveSites_Websites.count ##$Websites_ActiveSitescount = $ActiveSites_Websites.count # # #Read-only Sites Websites ##$ReadonlySites_Websites= Get-Content -Path "C:\Results_Readonly_WebSites.txt" | Measure-Object ##Write-Host "Websites Read-only Sites" $ReadonlySites_Websites.count ##$Websites_Readonlysitescount=$ReadonlySites_Websites.count # # #No-Access Sites Websites ##$NoaccessSies_Websites= Get-Content -Path "C:\Results_NoAccess_WebSites.txt" | Measure-Object ##Write-Host "Websites No-Access Sites" $NoaccessSies_Websites.count ##$Websites_NoAccessSitesCount=$NoaccessSies_Websites.count # #WebSites # # #Active Sites Websites ##$ActiveSites_Websites= Get-Content -Path "C:\Results_Active_WebSites.txt" | Measure-Object ## Write-Host "Websites Active sites" $ActiveSites_Websites.count ##$Websites_ActiveSitescount = $ActiveSites_Websites.count # # #Read-only Sites Websites ## $ReadonlySites_Websites= Get-Content -Path "C:\Results_Readonly_WebSites.txt" | Measure-Object ##Write-Host "Websites Read-only Sites" $ReadonlySites_Websites.count ##$Websites_Readonlysitescount=$ReadonlySites_Websites.count # # #No-Access Sites Websites ##$NoaccessSies_Websites= Get-Content -Path "C:\Results_NoAccess_WebSites.txt" | Measure-Object ##Write-Host "Websites No-Access Sites" $NoaccessSies_Websites.count ##$Websites_NoAccessSitesCount=$NoaccessSies_Websites.count $TotalActiveSite = ($Websites_ActiveSitescount + $WebSites_ActiveSitescount + $WebSites_ActiveSitescount + $WebSites_ActiveSitescount + $WebSites_ActiveSitescount + $WebSites_ActiveSitescount + $Websites_ActiveSitescount + $CTLQwest_ActiveSitescount + $RecordsCenter_ActiveSitescount + $Websites_ActiveSitescount + $Websites_ActiveSitescount + $Websites_ActiveSitescount + $Websites_ActiveSitescount + $Websites_ActiveSitescount) $TotalReadonlySites = ($Websites_Readonlysitescount + $WebSites_ReadonlySitesCount + $WebSites_Readonlysitescount + $WebSites_Readonlysitescount + $WebSites_Readonlysitescount + $WebSites_Readonlysitescount + $Websites_Readonlysitescount + $Websites_Readonlysitescount + $Websites_Readonlysitescount + $Websites_Readonlysitescount + $Websites_Readonlysitescount + $Websites_Readonlysitescount) $TotalNoAccessSite = ($Websites_NoAccessSitesCount + $WebSites_NoAccessSitesCount + $WebSites_NoAccessSitesCount + $WebSites_NoAccessSitesCount + $WebSites_NoAccessSitesCount + $WebSites_NoAccessSitesCount + $Websites_NoAccessSitesCount + $Websites_NoAccessSitesCount + $Websites_NoAccessSitesCount + $Websites_NoAccessSitesCount + $Websites_NoAccessSitesCount + $Websites_NoAccessSitesCount) #Total Sites $TotalWebSites = ($WebSites_ActiveSitescount + $WebSites_Readonlysitescount + $WebSites_NoAccessSitesCount) $TotalWebSites = ($WebSites_ActiveSitescount + $WebSites_ReadonlySitesCount + $WebSites_NoAccessSitesCount) $TotalWebSites = ($WebSites_ActiveSitescount + $WebSites_Readonlysitescount + $WebSites_NoAccessSitesCount) $TotalWebSites = ($WebSites_ActiveSitescount + $WebSites_Readonlysitescount + $WebSites_NoAccessSitesCount) $TotalWebSites = ($WebSites_ActiveSitescount + $WebSites_Readonlysitescount + $WebSites_NoAccessSitesCount) $TotalWebSites = ($WebSites_ActiveSitescount + $WebSites_Readonlysitescount + $WebSites_NoAccessSitesCount) $TotalWebSites = ($Websites_ActiveSitescount + $Websites_Readonlysitescount + $Websites_NoAccessSitesCount) $TotalWebSites = ($Websites_ActiveSitescount + $Websites_Readonlysitescount + $Websites_NoAccessSitesCount) $TotalWebSites =($Websites_ActiveSitescount + $Websites_Readonlysitescount + $Websites_NoAccessSitesCount) $TotalWebSites = ($Websites_ActiveSitescount + $Websites_Readonlysitescount + $Websites_NoAccessSitesCount) $TotalWebSites = ($Websites_ActiveSitescount + $Websites_Readonlysitescount + $Websites_NoAccessSitesCount) $TotalWebSites = ($Websites_ActiveSitescount + $Websites_Readonlysitescount + $Websites_NoAccessSitesCount) #====== All Sites Count $TotalSites =($TotalWebSites + $TotalWebSites + $TotalWebSites + $TotalWebSites + $TotalWebSites + $TotalWebSites + $TotalWebSites + $TotalWebSites + $TotalWebSites + $TotalWebSites + $TotalWebSites + $TotalWebSites) #Sending Email #================ #[string[]]$recipients = "" $recipients11 = @("") #[string[]]$recipients = "" # "" $smtp = "smtp" #$to = $recipients11 $from = "" #$from = "" $subject = "SharePoint Sites Current Status" $body = " <b> <font color=Navy> Date -$todaydate </b> </font> <br>" #$attachment11="C:\Results_Active_Web.txt","C:\Results_Active_Web.txt" #$body = " <b><font color=red> SP-Apps Read-only Sites Count - $Readonlysitecount </b></font> <br>" #$body += " <b><font color=red> SP-Apps Active Sites Count - $ActiveSitescount </b></font> <br>" #$body += " <b><font color=red> SP-Apps No-Access Sites Count - $NoAccessSiteCount </b></font> <br>" #$body += "Click <a href=http://www.google.com>here</a> to open google <br>" #### Now send the email using \> Send-MailMessage #========= $report = "<html> <style> {font-family: Arial; font-size: 15pt;color: #F70707; } {color:#F70707;} TABLE{border: 1px solid black; border-collapse: collapse; font-size:15pt;} #TH{border: 1px solid black; background: #F4D03F; padding: 5px; color: #000000;} TR{color: #2E86C1;text-align: center;background: #13B5ED; padding: 5px; color: #0F0F0F;} TR{color: #2E86C1;text-align: center;background: #13B5ED; padding: 5px; color: #0F0F0F;} TH{border: 1px solid black; background: #F4D03F; padding: 5px; color: #F70707;} TD{border: 1px solid black; padding: 5px; } H2{color: #F70707;} H1{Color: #0C0B0A;} </style> <h1> SharePoint Sites Current Status</h1> <table> <tr> <td> <b> Web Application </b> </td> <td> <b> Active Sites </b> </td> <td> <b> Read-Only Sites </b> </td> <td> <b> No-Access (Locked) Sites </b></td> <td> <b> Total Sites </b> </td> <tr> <tr> <td> <b> Web Application </b> </td> <td> $Web_ActiveSitescount </td> <td> $Web_Readonlysitescount</td> <td> $Web_NoAccessSitesCount </td> <td> <b> $TotalWebSites </b> </td> </tr> <tr> <td> <b> Web Application </b> </td> <td> $Web_ActiveSitescount </td> <td> $Web_ReadonlySitesCount</td> <td> $Web_NoAccessSitesCount </td> <td> <b> $TotalWebSites </b> </td> </tr> <tr> <td> <b> Web Application </b> </td> <td> $Web_ActiveSitescount </td> <td> $Web_Readonlysitescount </td> <td> $Web_NoAccessSitesCount </td> <td> <b> $TotalWebSites </b> </td> </tr> <tr> <td> <b> Web Application </b> </td> <td> $Web_ActiveSitescount </td> <td> $Web_Readonlysitescount </td> <td> $Web_NoAccessSitesCount </td> <td> <b> $TotalWebSites </b> </td> </tr> </tr> </table> " $report1 = "<html> <style> {font-family: Arial; font-size: 12pt;color: #0F0F0F; } {color:#F70707;} TABLE{border: 1px solid black; border-collapse: collapse; font-size:15pt;} #TH{border: 1px solid black; background: #F4D03F; padding: 5px; color: #000000;} TR{color: #F70707;text-align: center;background: #13B5ED; padding: 5px; color: #0F0F0F;} TR{color: #F70707;text-align: center;background: #13B5ED; padding: 5px; color: #0F0F0F;} TH{border: 1px solid black; background: #F4D03F; padding: 5px; color: #F70707;} TD{border: 1px solid black; padding: 5px; } H2{color: #F70707;} H1{Color: #0C0B0A;} </style> <table> <tr> <td> <b>Total Active Sites Count </b> </td> <td> <b> Total Read-Only Sites Count </b> </td> <td> <b> Total NoAccess Sites Count </b> </td> <td> <b> Total Sites </b> </td> </tr> <tr> <td> <b> $TotalActiveSite </b> </td> <td> <b> $TotalReadonlySites </b> </td> <td> <b> $TotalNoAccessSite </b> </td> <td> <b> $TotalSites </b> </td> </tr> </table> " #========== $body += " <br> $report< </br>" $body += " <br> $report1 </br>" $attachment12="C:\Results_Active_Web.txt" toadd="" #$toadd= "" #$toadd="" #send-MailMessage -SmtpServer $smtp -To $to -From $from -Subject $subject -Body $body -BodyAsHtml -Attachments $attachment11 -Priority Low #Send-MailMessage -SmtpServer "smtp" -To $toadd -From "email address removed for privacy reasons" -Subject $subject -Body $body -BodyAsHtml #Send-MailMessage -SmtpServer "smtp" -To $toadd -From "email address removed for privacy reasons" -Subject $subject -Body $body -BodyAsHtml -Attachments $attachment12 -Priority Low Send-MailMessage -SmtpServer "smtp" -To $toadd -From "email address removed for privacy reasons" -Subject $subject -Body $body -BodyAsHtml -Priority Low #Send-MailMessage -SmtpServer "smtp" -To $toadd -From "email address removed for privacy reasons" -Subject $body -Issue to move folders
Hello everyone. This is my first post here. I'm facing an issue where I'm unable to move folders. This started after the last SharePoint update. For example, as shown below, I cannot move folder 1 into folder 2. Inheritance policies and read/edit security groups have already been changed, and nothing changed. Anyone else experiencing this? Thank you for the community helping here.
"File not found" error (Error 53) when opening Access database
I'm getting a "File not found" (Error 53) error when trying to open an Access database (.accdb file). The error appears during the database startup process and points to a VBA subroutine declaration line: The error message mentions "The file was not found where specified" which suggests VBA is looking for a file during project compilation, but I can't identify what file it's looking for. Has anyone encountered this issue where the same Access file works with some SQL Server backends but fails to even open with others?
ODBC call failed. ORA-01406
Trying to link to tables on our server which has never been an issue. ODBC connection is fine, using Driver Oracle in OraClient 11g_home 1. Selecting Data Source ODBC Database and selecting Link to the data source by creating a linked table. At this point it asks for a password which is typical, next it would normally bring up the list of tables in the Oracle database to link to. Instead I get the error which states "fetched column value was truncated", once I hit OK to clear the error the usual window appears where I would see all the available tables to link to but no tables are listed, it's blank.Database in an "inconsistent state" and other errors
Hello. I was directed here for help by Microsoft Tech Support because the problem is "file specific" and not at the app level. I am not computer savvy and have never used a forum like this. Tech support just kind of dumped me here and said "have at it," so any guidance, help, etc. would be appreciated. I use Microsoft Office 365 as a personal/individual subscriber and my Access program started issuing error message over the past week. The biggest concern and problem is around db called Comic Books and I've attached the error message. When I click OK, it attempts to repair, fails and issues the second message. Another database--an earlier copy of Comic Books from mid December-- opens OK, but has its own problems, such as when I attempt to simply copy a table (see third error message). I don't know if these are related. Can anyone help me? Is there any hope for me ever regaining access to the Comic Books database which was last accessible and working on January 4? Thank you.
