browser

64 Topics

No longer able to add Teams link in invite from shared calendar in browser
Since one or two weeks I am no longer able to add a Teams link to an invite that I send from a shared emailaccount/calendar when I am using the browser link instead of the Outlook app. My situation: I am a contractor, working remotely for a company on my personal laptop. I have a personal company account (mailbox/calendar/Teams etc.). I support a specific team that meets regularly. I take care of organizing all the team meetings, and because I am not working every minute of the day, we decided to send invites for the whole team from the shared mailbox of the team, so that if I am not around immediately, others can adjust the invites as well. This worked perfectly for years. But since one or two weeks I am no longer able to add a Teams link when I access the account throught the browser (same for my colleagues). My colleagues can still add a Teams link when they use the Outlook app, however, since I am working on a personal laptop I cannot install the app and have to work from the browser. I reached out to internal IT support of course, but they can't help me unfortunately. First they stated that this never worked (which is not true, because I have been doing this for years) and later they stated that it is a change from the Microsoft end so they cannot solve it. Is this correct? And if so, what other ways of working would be available to reach the goal we are after (me setting up all initial meetings but others being able to adjust the invites as well when needed)? I also tried adding one colleague as a co-organizor, but it turned out that this colleague can still not change the meeting details..... Anyone here can help/advise?
YvonneS78
Dec 15, 2025 Place Microsoft Teams
33Views
0likes
2Comments
How to disable confirmation pop-up in Edge Browser when opening many tabs
I have bookmarks arranged in multiple folders, varying from 10 to 500 or more links per folder. Whenever I try to click on the bookmark folder to open all of them at once, I always get this Pop-up, which is very annoying to me (I was ignoring that pop-up for more than a year). Is there any built-in setting to disable or increase the limit? P.S: FYI, I am on a very high-end laptop(M4 pro with increased RAM & SSD) and due to my use case, I have to regularly, almost every day open many links
wasit-shafi
Sep 09, 2025 Place Discussions
43Views
0likes
0Comments
Copilot or Discover browser extension not working as expected for managed Edge browser
If your organization manages the MS Edge browser or has decided to limit the availability of Copilot (previously known as Discover in Edge) until administrators have a handle on its capabilities and risks, then this post may be helpful. You will find in the following article -- https://learn.microsoft.com/en-us/copilot/edge#summarization-by--in-edge -- Microsoft suggests for Admins who want to manage Copilot in Edge, they can "use multiple group policy settings to manage the behavior of the Copilot in Edge sidebar:" # I have found it very strange, especially when referencing brand new tools like Copilot, that Microsoft documentation suggests admins are still using, or should use group policy as opposed to more modern management tools like Intune # The article suggests the below "group policy settings" can be used to manage Copilot behavior in Edge: To allow or block Copilot in Edge from using browsing context, use the https://learn.microsoft.com/en-us/deployedge/microsoft-edge-policies policy. This prevents Copilot from using webpage or PDF content from being used to respond to prompts. To disable Copilot in Edge entirely, use the https://learn.microsoft.com/en-us/deployedge/microsoft-edge-policies policy. Blocking Copilot in Edge automatically blocks all Edge sidebar apps from being enabled. Now according to these instructions, you would use the https://learn.microsoft.com/en-us/deployedge/microsoft-edge-policies policy to allow Copilot in Edge to use browsing context and seemingly (since https://learn.microsoft.com/en-us/deployedge/microsoft-edge-policies is used to disable Copilot) you would set https://learn.microsoft.com/en-us/deployedge/microsoft-edge-policies to enabled in order to force Copilot to appear and be available for your users. To an admin still using group policy to set these maybe everything works fine -- In previous testing I have hacked my registry to create the above keys and can't remember the results, but it was kind of a pointless test since I personally use Intune to manage our Edge browser. If you're like me and use Intune to manage Edge's browser configuration at your organization, then seeing the keys above may prompt you to head to the Intune settings catalog to look for equivalent settings that you can use to set similar policy. Next, I'll share my findings from diving into how I might use something available in the Intune settings catalog. My findings are as follows: Show Copilot -- you will find this setting if you nav down through edge://settings/sidebar. With no settings configured related to Copilot you will see this in the off state and when you hover the briefcase icon where you would usually see "this setting is managed by your organization," you will just see a blank textbox. Right out of the gate this is a weird behavior and the only thing I have been able to chalk it up to so far is a bug -- my thinking is if your browser is managed by the organization then by default the Show Copilot setting will be in the off state. Ok, so now how do we actually get this thing on if we are ready for our users to use it? Discover feature In Microsoft Edge -- this is a setting you can find in the Intune settings catalog. Previously Copilot in Edge was called Bing Discover and it had a "B" icon. If you configure this setting today and set it to enabled you might expect it to display Discover or Copilot, however, when you check the edge://policy report you will find that EdgeDiscoverEnabled (as it shows up on the report) actually errors out and is described as an "unknown policy," and there will be no effect to the browser or to the Show Copilot setting I discussed above. https://learn.microsoft.com/en-us/deployedge/microsoft-edge-policies -- now back to the HubsSidebarEnabled setting referenced in the linked Microsoft documentation. Supposedly you would use this setting to "disable Copilot in Edge entirely." Now you can find a setting called Show Hubs Sidebar in the Intune settings catalog and you can set it to enabled. When you nav to the edge://policy report you will even see it successfully configured and reporting in as OK. However, in my testing I have not seen this have any effect on the Always show sidebar setting found at edge://settings/sidebar, and I have not seen this have any effect on the Show Copilot setting found at edge://settings/sidebar when you drill into the Copilot settings. So, my only conclusion here is that the HubsSidebarEnabled from the Intune settings catalog isn't ready for showtime. https://learn.microsoft.com/en-us/deployedge/microsoft-edge-policies -- This is a setting you can find in the Intune settings catalog called Enable Discover access to page contents for AAD profiles. This setting will successfully configure and report back as OK in edge://policy report, however, I have not tested any further and can't tell you if it is actually doing what it intends to since I have not successfully configured Copilot using the other Intune settings. The only success I have found so far in all of this Copilot, Discover and Sidebar research are the following two extension IDs that can be added to your force install extension list -- and as a result the Copilot browser extension should appear. If you are new to using Intune to manage browser policy and aren't sure what I mean by the 'force install extension list,' drop a comment and I'll be happy to add some detail about that. Extension IDs: nkbndigcebkoaejohleckhekfmcecfja ofefcgjbeghpigppfmkologfjadafddi I found these extension IDs by using ctrl + f on the edge://sidebar-internals page looking for results related to the search term "Discover." At the moment this seems like the best way to enable and test Copilot until the Intune settings currently available begin working as they are described. This is not meant to criticize the speed at which Microsoft has made settings available or set them up to work perfectly, but to prompt discussion and help others who might be going in circles trying to figure out if they're configuring something incorrectly. TL;DR There are currently settings in the Intune settings catalog that don't seem to work as expected if you are trying to enable/disable Copilot for a managed instance of Edge at your organization. As a workaround there are a couple extension IDs that can be added to your ForceInstallExtension list to help display Copilot in the Edge sidebar. I've attached some screenshots related to different things referenced in this post.
Solved
pjv4tx
Jun 23, 2025 Place Discussions
14KViews
3likes
6Comments
--js-flags=--noexpose_wasm launch flag causes STATUS_BREAKPOINT
Version 135.0.3179.73 (Official build) (64-bit), Windows 11 Education, also occurs on Windows 10 Education and Windows 10 Pro, been testing this since probably version 129 of Edge. --js-flags=--noexpose_wasm as a launch flag causes STATUS_BREAKPOINT, this is regardless of default configuration and with or without extensions. WASM can be used to discover privileged information about a machine, and this seems to be working in the past according to some users online, but no longer does now. Please can someone advise?
wanttobrowse
Apr 14, 2025 Place Discussions
175Views
0likes
1Comment
Edge error RESULT_CODE_MISSING_DATA or RESULT_CODE_KILLED_BAD_MESSAGE even in the settings menu.
After the KB5050021 (Windows 11 (23H2)) update, Edge stopped working. The same error appears on all tabs and even in the settings: Error code: RESULT_CODE_MISSING_DATA. I deleted the update, but Edge still didn't work. Edge only partially worked in compatibility mode with Windows 8. Does anyone know what the problem could be? Without compatibility, the error is either RESULT_CODE_MISSING_DATA or RESULT_CODE_KILLED_BAD_MESSAGE, and on any tabs and even in the settings menu. Edge Version 134.0.3124.93 (Official Build) (64-bit) DEV/BETA/CAN also don't work with the same errors. UDP. After the KB5053602 (Windows 11 (23H2)) update, Edge still not working. Is there a solution to this problem?
ArtForce
Apr 02, 2025 Place Discussions
237Views
0likes
0Comments
Suggestion: add Progress Bar and Next/Prev options to the PiP (Picture in Picture) in Edge browser
Suggestion: add Progress Bar and Next/Prev options to the PiP (Picture in Picture) in Edge browser Here is a video of my side by side comparison of PiP in Edge Canary Version 83.0.461 and PiP in Windows 10 Movies & TV app which is the superior one. Also allow to control that progress bar in PiP. use the same small minimal style from the app on Windows 10 but on mouse hover, the progress bar needs to get bigger and come Up so user can control it and click on it. Thanks. https://streamable.com/rocr2
Solved
HotCakeX
Mar 04, 2025 Place Discussions
6.4KViews
7likes
12Comments
Pin tab groups in edge
Hello, I'm in love with Edge's new tab Group feature, but there is one issue with it. usually, People want those groups to open whenever the browser starts up. so I have a suggestion to add Pin group feature where it works just like pin tab. What do you think insiders?
Adel-A
Feb 24, 2025 Place Discussions
13KViews
13likes
10Comments
Browser for SQL Server 2017 and 2019
Hello, my question is the following. Despite having the latest updates released for SQL Server 2019 and 2017, I notice that SQL Server Browser does not change versions, remaining in the versions mentioned below. I would like to know if they are in fact the latest versions of SQL Server Browser released in the 2017 and 2019 packages. If the versions below are correct, if they really have not been updated. Browser for SQL Server 2017 14.0.1000.169 Browser for SQL Server 2019 15.0.2000.5
rafaelsalgado92
Nov 11, 2024 Place SQL Server
450Views
0likes
1Comment
New Edge Browser Control in Microsoft Access
We’re excited to announce the release of the new Edge Browser Control in Microsoft Access! This control allows you to seamlessly integrate modern web content into your Access forms and reports.
lindalu-MSFT
Jun 02, 2024 Place Access Blog
18KViews
5likes
17Comments
Does anyone inform their users how to set OneDrive to open in the client applications?
I'm looking for other opinions and experiences on this because of a question I've been asked. There are two ways to change your OneDrive for Business area (in browser) to open documents in the client application. It only affects the OneDrive that it is being set upon though, but it definitely has ripple effects that can cause confusion in users when they experience inconsistencies in behaviors. I think the shared documents experiences in particular might be the areas that would experience most of the weird behaviors. Has anyone else documented or instructed users about doing this? What behavior changes in the UI were noticed by people? Was it confusing or did people just brush off the inconsistent opening in the browser/client application experiences?
TimLB
Feb 02, 2024 Place OneDrive
760Views
0likes
4Comments