Videos
14 Topics
Severe Frame Drops in Microsoft Edge When Playing Tencent Video HEVC at 1080P in Windows
When playing HEVC videos from Tencent Video(https://v.qq.com) on Microsoft Edge (Windows), I experience severe frame drops at 1080P resolution. However, this issue does not occur when playing at 720P. Interestingly, Chrome does not exhibit the same problem when playing the same 1080P videos. I have saved the relevant video files for comparison. Is this a bug in Edge? Upon analyzing the files using Mp4Box.js, no significant differences were found. https://thumbplayer-76307.gzc.vod.tencent-cloud.com/testvideo/mp4/h265/ffmpeg_output_1080P.mp4 https://thumbplayer-76307.gzc.vod.tencent-cloud.com/testvideo/mp4/h265/ffmpeg_output_720P.mp4 AMD Ryezen7 4700G DDR4 3200 16x2 RTX 3050 8GB Windows 11 22H2 22621.4460247Views1like4CommentsPowershell Script to list ALL videos in your 365 Stream environment
I hope this is useful to everyone. My goal was to get a list of all videos in my stream so that I could contact each video creator about the changes that are coming to stream. Also so I could figure out how much work there was to do in moving, and how much video is created and not used. My original solution (posted here 7 Oct 2020) I've retired, as thanks to Twan van Beers code here https://neroblanco.co.uk/2022/02/get-list-of-videos-from-microsoft-stream/ I've been able to build a single ps1 script that does all I need. I'll leave the the original code at the bottom of this post. Take a look a the comments I've put into the code for how to use this script. I found that my original script gave me information about the videos but it was hard to use AND didn't tell me which videos were in which channels. This new version of Twan van Beers script gives me both. Save the new code Oct 2022 as a PowerShell script e.g. get-stream-video-info.ps1 Then open a powershell screen, navigate to the folder get-stream-video-info.ps1 is in. To run it enter .\get-stream-video-info.ps1 "C:\Temp\streamanalysis\stream7Oct22-getnbstreamvideoinfo.csv" Follow the on screen prompts. >>> New Code Oct 2022 <<< using namespace System.Management.Automation.Host [CmdletBinding()] param ( [parameter(Position=0,Mandatory=$False)] [string]$OutputCsvFileName, [parameter(Position=1,Mandatory=$False)] [switch]$OpenFileWhenComplete = $False ) # ---------------------------------------- # How to use <#-- Open a powershell window then type in the following and click enter .\get-stream-video-info.ps1 "C:\Temp\streamanalysis\stream7Oct22-getnbstreamvideoinfo.csv" You'll then be prompted for 3 options [V] Videos [C] ChannelVideos [A] All [?] Help (default is "V"): V - videos, which will get a list of all the videos in your STREAM environment. NOTE you may need to alter the variables in the code if you have more than 1000s of videos C - ChannelVideos, will get a list of all the videos and the channels they are in. NOTE this returns a filtered view of all the videos associated with a channel A - All, returns both the Videos and the ChannelVideos. You'll then be prompted for a user to login to the STREAM portal with, this is so the script can get a security token to do it's work with. Choose/use an account with full access to STREAM. If you used a CSV file path after the script name, then this powershell script will export one or two CSV files based on the option chosen <your folder path, your filename>-videos<your file ending> and or <your folder path, your filename>-channelVideos<your file ending> If you don't want to export file names, this powershell creates objects you can use in other ways V or A - will create an object $ExtractData, which is a list of every video and key properties for each video. C or A - wil create an object $videosPerChannel, which lists key information about each video AND the channel they are part of. ---------------------------------------------------------------------------------------------- original source my script https://techcommunity.microsoft.com/t5/microsoft-stream-classic/powershell-script-to-list-all-videos-in-your-365-stream/m-p/1752149 which inspired Twan van Beers to write https://neroblanco.co.uk/2022/02/get-list-of-videos-from-microsoft-stream/ I've then taken Twan's script and modified it to do what I require in my environment. Namely - get the video information AND the channels they are part of. For my 1000 or so videos and 35 channels, it takes about 1 min to run using the All option. This meant I was able to setup an intranet video library with a channel metadata column, folders per channel (so i could give edit rights to channel owners, without opening up the entire library or having to use multiple libraries), and eventually download the videos, then upload them into the library using ShareGate to reinstate some of the key metadata, i.e. created date, person who created them etc --#> # ---------------------------------------------------------------------------------------------- function Show-OAuthWindowStream { param ( [string]$Url, [string]$WindowTitle ) $Source = ` @" [DllImport("wininet.dll", SetLastError = true)] public static extern bool InternetSetOption(IntPtr hInternet, int dwOption, IntPtr lpBuffer, int lpdwBufferLength); "@ $WebBrowser = Add-Type -memberDefinition $Source -passthru -name $('WebBrowser'+[guid]::newGuid().ToString('n')) $INTERNET_OPTION_END_BROWSER_SESSION = 42 # Clear the current session $WebBrowser::InternetSetOption([IntPtr]::Zero, $INTERNET_OPTION_END_BROWSER_SESSION, [IntPtr]::Zero, 0) | out-null Add-Type -AssemblyName System.Windows.Forms $Form = New-Object -TypeName System.Windows.Forms.Form -Property @{Width = 600; Height = 800 } $Script:web = New-Object -TypeName System.Windows.Forms.WebBrowser -Property @{Width = 580; Height = 780; Url = ($URL -f ($Scope -join "%20")) } $Web.ScriptErrorsSuppressed = $True $Form.Controls.Add($Web) $Featured = { $Head = $Web.Document.GetElementsByTagName("head")[0]; $ScriptEl = $Web.Document.CreateElement("script"); $Element = $ScriptEl.DomElement; # Javascript function to get the sessionInfo including the Token $Element.text = ` @' function CaptureToken() { if( typeof sessionInfo === undefined ) { return ''; } else { outputString = '{'; outputString += '"AccessToken":"' + sessionInfo.AccessToken + '",'; outputString += '"TenantId":"' + sessionInfo.UserClaim.TenantId + '",'; outputString += '"ApiGatewayUri":"' + sessionInfo.ApiGatewayUri + '",'; outputString += '"ApiGatewayVersion":"' + sessionInfo.ApiGatewayVersion + '"'; outputString += '}'; return outputString; } } '@; $Head.AppendChild($ScriptEl); $TenantInfoString = $Web.Document.InvokeScript("CaptureToken"); if( [string]::IsNullOrEmpty( $TenantInfoString ) -eq $False ) { $TenantInfo = ConvertFrom-Json $TenantInfoString if ($TenantInfo.AccessToken.length -ne 0 ) { $Script:tenantInfo = $TenantInfo; $Form.Controls[0].Dispose() $Form.Close() $Form.Dispose() } } } $Web.add_DocumentCompleted($Featured) $Form.AutoScaleMode = 'Dpi' $Form.ShowIcon = $False $Form.Text = $WindowTitle $Form.AutoSizeMode = 'GrowAndShrink' $Form.StartPosition = 'CenterScreen' $Form.Add_Shown( { $Form.Activate() }) $Form.ShowDialog() | Out-Null write-output $Script:tenantInfo } # ---------------------------------------------------------------------------------------------- function Get-RequestedAssets([PSCustomObject]$Token, [string]$Url, [string]$Label) { $Index = 0 $MainUrl = $Url $AllItems = @() do { $RestUrl = $MainUrl.Replace("`$skip=0", "`$skip=$Index") Write-Host " Fetching ... $($Index) to $($Index+100)" $Items = @((Invoke-RestMethod -Uri $RestUrl -Headers $Token.headers -Method Get).value) $AllItems += $Items $Index += 100 } until ($Items.Count -lt 100) Write-Host " Fetched $($AllItems.count) items" $Assets = $AllItems | Select-Object ` @{Name='Type';Expression={$Label}},` Id, Name,` @{Name='Size(MB)';Expression={$_.AssetSize/1MB}}, ` PrivacyMode, State, VideoMigrationStatus, Published, PublishedDate, ContentType, Created, Modified, ` @{name='Media.Duration';Expression={$_.Media.Duration}},` @{name='Media.Height';Expression={$_.Media.Height}},` @{name='Media.Width';Expression={$_.Media.Width}},` @{name='Media.isAudioOnly';Expression={$_.media.isAudioOnly}},` @{name='Metrics.Comments';Expression={$_.Metrics.Comments}},` @{name='Metrics.Likes';Expression={$_.Metrics.Likes}},` @{name='Metrics.Views';Expression={$_.Metrics.Views}}, ` @{name='ViewVideoUrl';Expression={("https://web.microsoftstream.com/video/" + $_.Id)}}, ` @{name='VideoCreatorName';Expression={$_.creator.name}}, ` @{name='VideoCreatorEmail';Expression={$_.creator.mail}}, ` @{name='VideoDescription';Expression={$_.description}} write-output $Assets } function Get-VideoChannels([PSCustomObject]$Token, [string]$Url, [string]$Label) { #this will get the list of channels $Index = 0 $MainUrl = $Url $AllItems = @() do { $RestUrl = $MainUrl.Replace("`$skip=0", "`$skip=$Index") Write-Host " Fetching ... $($Index) to $($Index+100)" $Items = @((Invoke-RestMethod -Uri $RestUrl -Headers $Token.headers -Method Get).value) $AllItems += $Items $Index += 100 } until ($Items.Count -lt 100) Write-Host " Fetched $($AllItems.count) items" #to add properties to this section look at https://aase-1.api.microsoftstream.com/api/channels?$skip=0&$top=100&adminmode=true&api-version=1.4-private $Channels = $AllItems | Select-Object ` @{Name='Type';Expression={$Label}},` Id, Name, Description,` @{Name='MetricsVideos';Expression={$_.metrics.videos}} #write-host $channels.count write-output $Channels } function Get-channelVideos([PSCustomObject]$Token, [PSCustomObject]$allChannels, [string]$Label) { #this will get the list of channels $MainUrl = "https://aase-1.api.microsoftstream.com/api/channels/ChannelIDToSwap/videos?`$top=50&`$skip=0&`$filter=published%20and%20(state%20eq%20%27completed%27%20or%20contentSource%20eq%20%27livestream%27)&`$expand=creator,events&adminmode=true&`$orderby=name%20asc&api-version=1.4-private" #for each channel URL go through all the videos, capture the channel name against the video id and name $allVideosPerChannel = @() foreach($chan in $allChannels) { $thisChannelid = $chan.id $chanUrl = @( $MainUrl.Replace("ChannelIDToSwap", $thisChannelid) ) $chanName = $chan.name $AllItems = "" $items = "" $thischanvideos = "" $Index = 0 #write-host $chanUrl #loop the index do { $RestUrl = $chanUrl.Replace("`$skip=0", "`$skip=$Index") #write-host $restUrl #Write-Host "$chanName | Fetching ... $($Index) to $($Index+50)" $Items = @((Invoke-RestMethod -Uri $RestUrl -Headers $Token.headers -Method Get).value) $allItems = $items | select id,name, @{Name='Channel';Expression={$chanName}},@{Name='Type';Expression={$Label}} #write-host $allItems.count #foreach($x in $items ) { # write-host $x.name #write-host $x.id #write-host $label #write-host $chanName #} $Index += 50 } until ($Items.Count -lt 100) #got videos into $items, now mist with $chan info and put into $allVideosPerChannel object $allVideosPerChannel += $AllItems $AllItems = "" $items = "" } Write-Host " Fetched $($allVideosPerChannel.count) videos in $($allChannels.count) channels" #to add properties to this section look at https://aase-1.api.microsoftstream.com/api/channels?$skip=0&$top=100&adminmode=true&api-version=1.4-private write-output $allVideosPerChannel } # ---------------------------------------------------------------------------------------------- function Get-StreamToken() { $TenantInfo = Show-OAuthWindowStream -url "https://web.microsoftstream.com/?noSignUpCheck=1" -WindowTitle "Please login to Microsoft Stream ..." $Token = $TenantInfo.AccessToken $Headers = @{ "Authorization" = ("Bearer " + $Token) "accept-encoding" = "gzip, deflate, br" } $UrlTenant = $TenantInfo.ApiGatewayUri $ApiVersion = $TenantInfo.ApiGatewayVersion $UrlBase = "$UrlTenant{0}?`$skip=0&`$top=100&adminmode=true&api-version=$ApiVersion" $RequestToken = [PSCustomObject]::new() $RequestToken | Add-Member -Name "token" -MemberType NoteProperty -Value $Token $RequestToken | Add-Member -Name "headers" -MemberType NoteProperty -Value $Headers $RequestToken | Add-Member -Name "tenantInfo" -MemberType NoteProperty -Value $TenantInfo $Urls = [PSCustomObject]::new() $RequestToken | Add-Member -Name "urls" -MemberType NoteProperty -Value $Urls $RequestToken.urls | Add-Member -Name "Videos" -MemberType NoteProperty -Value ($UrlBase -f "videos") $RequestToken.urls | Add-Member -Name "Channels" -MemberType NoteProperty -Value ($UrlBase -f "channels") $RequestToken.urls | Add-Member -Name "Groups" -MemberType NoteProperty -Value ($UrlBase -f "groups") $UrlBase = $UrlBase.replace("`$skip=0&", "") $RequestToken.urls | Add-Member -Name "Principals" -MemberType NoteProperty -Value ($UrlBase -f "principals") write-output $RequestToken } function New-Menu { [CmdletBinding()] param( [Parameter(Mandatory)] [ValidateNotNullOrEmpty()] [string]$Title, [Parameter(Mandatory)] [ValidateNotNullOrEmpty()] [string]$Question ) $videos = [ChoiceDescription]::new('&Videos', 'Videos') $channelvideos = [ChoiceDescription]::new('&ChannelVideos', 'All Videos by Channel') $all = [ChoiceDescription]::new('&All', 'All videos AND all videos by channel') $options = [ChoiceDescription[]]($videos, $channelvideos, $all) $result = $host.ui.PromptForChoice($Title, $Question, $options, 0) switch ($result) { 0 { 'Videos' } 1 { 'ChannelVideos' } 2 { 'All' } } } $menuoutome = New-Menu -title 'Stream videos' -question 'What do you want to output?' #write-host $menuoutome $StreamToken = Get-StreamToken $urlQueryToUse = $StreamToken.Urls.Videos #default $StreamToken.Urls.Videos is something like https://aase-1.api.microsoftstream.com/api/videos?$skip=900&$top=100&adminmode=true&api-version=1.4-private #To get creator and event details you need to add $expand=creator,events to the URL , not to do that you need to use &`$expand=creator,events with out the ` powershell thinks $expand is a variable. # e.g. use $urlQueryToUse = $StreamToken.Urls.Videos+"&`$expand=creator,events" #Other option # use the following if you want to only see files that have privacymode eq 'organization' i.e. video is visible to EVERYONE in the organisation # Thanks to Ryechz for this # # $urlQueryToUse = $StreamToken.Urls.Videos + "&orderby=publishedDate%20desc&`$expand=creator,events&`$filter=published%20and%20(state%20eq%20%27Completed%27%20or%20contentSource%20eq%20%27livestream%27)%20and%20privacymode%20eq%20%27organization%27%20" if($menuoutome -eq 'Videos' -Or $menuoutome -eq 'All'){ #modify the -URL submitted to get more data or filter data or order the output $ExtractData = Get-RequestedAssets -token $StreamToken -Url $urlQueryToUse -Label "Videos" write-host "" write-host "The `$ExtractData object contains all the details about each video. Use `$ExtractData[0] to see the first item in the object, and it's properties." if( $OutputCsvFileName ) { $thisOutputCsvFileName = $OutputCsvFileName.replace(".csv", '-'+$menuoutome+'-videos.csv') $ExtractData | Export-CSV $thisOutputCsvFileName -NoTypeInformation -Encoding UTF8 write-host "The following file has been created: $thisOutputCsvFileName" if( $OpenFileWhenComplete ) { Invoke-Item $thisOutputCsvFileName } } } if($menuoutome -eq 'ChannelVideos' -Or $menuoutome -eq 'All'){ #Get the list of channels , filter the result for the channel id and name $channelList = Get-VideoChannels -token $StreamToken -Url $StreamToken.Urls.Channels -Label "Channels" #for each channel get the videos that are in that channel, so that we can match them up to the ExtractData , which is the list of all videos) $videosPerChannel = get-channelvideos -token $StreamToken -allChannels $channelList -Label "ChannelVideos" write-host "" write-host "The `$videosPerChannel object contains key information about each video and the channel it is in. Use `$videosPerChannel[0] to see the first video, and it's properties." write-host "The `$channelList object contains a list of channel's and their properties." if( $OutputCsvFileName ) { $thisOutputCsvFileName = $OutputCsvFileName.replace(".csv", '-'+$menuoutome+'-channelVideos.csv') $videosPerChannel | Export-CSV $thisOutputCsvFileName -NoTypeInformation -Encoding UTF8 write-host "The following file has been created: $thisOutputCsvFileName" if( $OpenFileWhenComplete ) { Invoke-Item $thisOutputCsvFileName } } } >>> Original Code Oct 2020 <<< I've left this here in case it is useful to anyone. See the script above for a better solution. That said this solution relies on you knowing a bit about PowerShell, being a Stream Admin and being happy to manually save some files (I couldn't figure out how to do pass through windows authentication for the script) so you have to manually save each paged JSON file of 100 videos. It took me about 20minutes to export information about 591 videos (about 3 hours to make the script). To use the script update each variable marked with #<<<< Update this value in a normal (not admin) powershell window run the script (i copy and paste logical parts into the powershell window) you will be given several urls, to visit and save the JSON files from once you have the JSON files the final part of the script reads those, and exports a CSV file with a row per video in STREAM NOTE : as an admin you see all videos, so before you share the CSV with others be aware that there may be sensitive information in it that most users can't see due to STREAM's in built security. I don't have much time, hence I made this script so please don't expect quick answers to any questions. This script is rough, use it if it helps, but ... be professional and check it before you use it. ##>> Update 5 Aug 2021 <<## Thanks to everyone who has commented, I've updated the code below with your suggestions You still have to manually save the JSON browser tabs that show up as JSON files into a folder, but other than that I hope it is now easier for you to use 🙂 #reference https://techcommunity.microsoft.com/t5/microsoft-stream-forum/powershell-script-to-audit-and-export-channel-content-details-of/m-p/354832 # goal of this script #- get list of all videos in stream for analysis #- it takes about 20 minutes to do this for 500 stream videos. #First # find out what your api source is # go to the following URL in chrome as an admin of Stream https://web.microsoftstream.com/browse # using Developer tools look at the "console" search for .api.microsoftstream to find out what is between https:// and .api.microsoftstream in my case https://aase-1.api.microsoftstream.com/api/ [string]$rootAPIlocation = "aase-1" #<<<< Update this value to the one you find in the console view #[string]$rootAPIlocation = "uswe-1" # use this for Western US #[string]$rootAPIlocation = "euno-1" # use this for the Europe North region #enter where you on your computer you want the files to go [string]$PowerShellScriptFolder = "C:\Temp\streamanalysis" #<<<< Update this value #json files will be saved into "VideosJSON" folder [string]$streamJSONfolder = Join-Path -Path $PowerShellScriptFolder -ChildPath "VideosJSON" #<<<< Update this value if you want a different folder name #>>> REMOVES all exiisting JSON files <<<< #remove all JSON items in this folder Remove-Item -path $streamJSONfolder\* -include *.json -Force -Recurse #guess approx number of videos you think you have divide by 100 e.g. 9 = 900 videos [int]$Loopnumber = 9 #<<<< Update this value #put in your stream portal url [string]$StreamPortal = "https://web.microsoftstream.com/?NoSignUpCheck=1" #put in the url where you see all videos from in stream [string]$StreamPortalVideoRoot = "https://web.microsoftstream.com/browse/" #$StreamPortalChannelRootForFindingVideos [string]$StreamPortalVideoViewRoot= "https://web.microsoftstream.com/video/" # for watching a video #this builds from the info you've put in a URL which will give back the JSON info about all your videos. [string]$StreamAPIVideos100 = "https://$rootAPIlocation.api.microsoftstream.com/api/videos?NoSignUpCheck=1&`$top=100&`$orderby=publishedDate%20desc&`$expand=creator,events&`$filter=published%20and%20(state%20eq%20%27Completed%27%20or%20contentSource%20eq%20%27livestream%27)&adminmode=true&api-version=1.4-private&`$skip=0" #$StreamAPIVideos100 # use the following if you want to only see files that have privacymode eq 'organization' i.e. video is visible to EVERYONE in the organisation #Thanks to Ryechz for this # # [string]$StreamAPIVideos100 = "https://$rootAPIlocation.api.microsoftstream.com/api/videos?NoSignUpCheck=1&`$top=100&`$orderby=publishedDate%20desc&`$expand=creator,events&`$filter=published%20and%20(state%20eq%20%27Completed%27%20or%20contentSource%20eq%20%27livestream%27)%20and%20privacymode%20eq%20%27organization%27%20&adminmode=true&api-version=1.4-private&`$skip=0" [int]$skipCounter [int]$skipCounterNext = $skipCounter+100 [string]$fileName = "jsonfor-$skipCounter-to-$skipCounterNext.json" #next section creates the URLS you need to manually download the json from , it was too hard to figure out how to do this programatically with authentication. Write-Host " Starting Chrome Enter your credentials to load O365 Stream portal" -ForegroundColor Magenta #Thanks Conrad Murray for this tip Start-Process -FilePath 'chrome.exe' -ArgumentList $StreamPortal Read-Host -Prompt "Press Enter to continue ...." Write-host " -----------------------------------------" -ForegroundColor Green Write-host " --Copy and past each url into chrome-----" -ForegroundColor Green Write-host " --save JSON output into $streamJSONfolder" -ForegroundColor Green for($i=0;$i -lt $Loopnumber; $i++) { $skipCounter = $i*100 if($skipCounter -eq 0) { write-host $StreamAPIVideos100 Start-Process -FilePath 'chrome.exe' -ArgumentList $StreamAPIVideos100 } else { write-host $StreamAPIVideos100.replace("skip=0","skip=$skipCounter") #following code opens browser tabs for each of the jsonfiles #Thanks Conrad Murray for this tip Start-Process -FilePath 'chrome.exe' -ArgumentList $StreamAPIVideos100.replace("skip=0","skip=$skipCounter") } } Write-host " --save each browser window showing JSON output into $streamJSONfolder" -ForegroundColor Green Write-host " -----------------------------------------------------------------------------------" -ForegroundColor Green Write-host " -----------------------------------------" -ForegroundColor Green Read-Host -Prompt "Press Enter to continue ...." Write-host " -----------------------------------------" -ForegroundColor Green $JSONFiles = Get-ChildItem -Path $streamJSONfolder -Recurse -Include *.json [int]$videoscounter = 0 $VideosjsonAggregateddata=@() $data=@() foreach($fileItem in $JSONFiles) { Write-host " -----------------------------------------" -ForegroundColor Green Write-Host " =====>>>> getting content of JSON File:", $fileItem, "- Path:", $fileItem.FullName -ForegroundColor Yellow $Videosjsondata = Get-Content -Raw -Path $fileItem.FullName | ConvertFrom-Json $VideosjsonAggregateddata += $Videosjsondata Write-host " -----------------------------------------" -ForegroundColor Green #Write-Host " =====>>>> Channel JSON Raw data:", $Videosjsondata -ForegroundColor green #Read-Host -Prompt "Press Enter to continue ...." } write-host "You have " $VideosjsonAggregateddata.value.count " videos in Stream , using these selection criteria" foreach($myVideo in $VideosjsonAggregateddata.value) { $videoscounter += 1 $datum = New-Object -TypeName PSObject Write-host " -----------------------------------------" -ForegroundColor Green Write-Host " =====>>>> Video (N°", $videoscounter ,") ID:", $myVideo.id -ForegroundColor green Write-Host " =====>>>> Video Name:", $myVideo.name," created:", $myVideo.created,"- modified:", $myVideo.modified -ForegroundColor green Write-Host " =====>>>> Video Metrics views:", $myVideo.metrics.views, "- comments:", $myVideo.metrics.comments -ForegroundColor Magenta Write-Host " =====>>>> Video Creator Name: ", $myVideo.creator.name , " - Email:", $myVideo.creator.mail -ForegroundColor Magenta Write-Host " =====>>>> Video Description: ", $myVideo.description -ForegroundColor Magenta $datum | Add-Member -MemberType NoteProperty -Name VideoID -Value $myVideo.id $datum | Add-Member -MemberType NoteProperty -Name VideoName -Value $myVideo.name $datum | Add-Member -MemberType NoteProperty -Name VideoURL -Value $($StreamPortalVideoViewRoot + $myVideo.id) $datum | Add-Member -MemberType NoteProperty -Name VideoCreatorName -Value $myVideo.creator.name $datum | Add-Member -MemberType NoteProperty -Name VideoCreatorEmail -Value $myVideo.creator.mail $datum | Add-Member -MemberType NoteProperty -Name VideoCreationDate -Value $myVideo.created $datum | Add-Member -MemberType NoteProperty -Name VideoModificationDate -Value $myVideo.modified $datum | Add-Member -MemberType NoteProperty -Name VideoLikes -Value $myVideo.metrics.likes $datum | Add-Member -MemberType NoteProperty -Name VideoViews -Value $myVideo.metrics.views $datum | Add-Member -MemberType NoteProperty -Name VideoComments -Value $myVideo.metrics.comments #the userData value is for the user running the JSON query i.e. did that user view this video. It isn't for information about all users who may have seen this video. There seems to be no information about that other than, total views = metrics.views #$datum | Add-Member -MemberType NoteProperty -Name VideoComments -Value $myVideo.userData.isViewed $datum | Add-Member -MemberType NoteProperty -Name Videodescription -Value $myVideo.description #thanks Johnathan Ogden for these values $datum | Add-Member -MemberType NoteProperty -Name VideoDuration -Value $myVideo.media.duration $datum | Add-Member -MemberType NoteProperty -Name VideoHeight -Value $myVideo.media.height $datum | Add-Member -MemberType NoteProperty -Name VideoWidth -Value $myVideo.media.width $datum | Add-Member -MemberType NoteProperty -Name VideoIsAudioOnly -Value $myVideo.media.isAudioOnly $datum | Add-Member -MemberType NoteProperty -Name VideoContentType -Value $myVideo.contentType $data += $datum } $datestring = (get-date).ToString("yyyyMMdd-hhmm") $csvfileName = ($PowerShellScriptFolder + "\O365StreamVideoDetails_" + $datestring + ".csv") #<<<< Update this value if you want a different file name Write-host " -----------------------------------------" -ForegroundColor Green Write-Host (" >>> writing to file {0}" -f $csvfileName) -ForegroundColor Green $data | Export-csv $csvfileName -NoTypeInformation Write-host " ------------------ DONE -----------------------" -ForegroundColor Green Disclaimer : You can use that solution as you want and modify it depending of your case. Many thanks to Fromelard and his https://techcommunity.microsoft.com/t5/microsoft-stream-forum/powershell-script-to-audit-and-export-channel-content-details-of/m-p/354832 which gave me enough to figure out how to do this.Solved
Error al reproducir videos desde la pc en Windows 11
Al principio pensĂ© que seria un problema con controladores de la tarjeta gráfica y los actualice a lo Ăşltimo en la actualidad: PensĂ© que podrĂa ser una actualizaciĂłn de Windows que me falto y ya la actualice a su totalidad: Y todavĂa persevera este error, para ser honesto ya no sĂ© que hacer. Si me pudieran apoyar en verdad lo agradecerĂa, que tengan un muy buen dĂa.8KViews0likes1Comment
Edge Flickering when watching videos
Version 105.0.1343.33 (Official build) (64-bit) On both Youtube (Dark mode) and Netflix, my screen keeps flickering, but it doesn't occur on other browsers such as Brave. I've set the Choose ANGLE graphics backend to D3D9, D3D11, but still, the issue still persists. I'm using a discrete GPU (GTX 1070) and I've not had any flickering on Games. Basically, just the Edge browser whenever I'm watching videos. Anyone else have this issue?1.6KViews0likes0Comments
Videos stop-starting in Teams
I need to present a session that has embedded YouTube videos in the PowerPoint deck. When I share the deck, I cannot play the video. It plays for a fraction of a second and then stops. If I click play again, the same thing happens. The same applies when I try and share any video (online or local) on a Teams call. Even if I'm not sharing my screen but I'm on a teams call, I cannot play videos.Solved2.8KViews2likes3Comments
can not move video files between channels in teams
Good day all, I have an issue with moving video files from one channel in teams to another. The video file size is 258Mb. It acts like it uploads but takes forever and no response in the end. Please any experienced this issue before? Is there a limited file size for moving files on teams? I need an urgent response as It affects productivity in my organization. Thank you.Solved1.6KViews1like3CommentsGive feedback on SharePoint site/page creation with videos
My name is Paul Chang and I'm a designer working on Microsoft Stream. Stream is integrating into OneDrive and SharePoint and we're hoping to make improvements to how videos show up on SharePoint. We'd love to chat with people who have had experience creating SharePoint pages/sites with video content for work. We'll discuss the creation experience, how video content is added, and pain points with the current process. If you're available to join us for a 45 minute conversation, please sign up for a time and date that works for you using this link: https://calendly.com/sharepoint-videos/45min , and we'll send an invitation for a Teams meeting to the email you provided. If you have any questions, you can contact me at pacha@microsoft.com.811Views0likes0CommentsGive feedback on SharePoint site/page creation with videos
My name is Paul Chang and I'm a designer working on Microsoft Stream. Stream is integrating into OneDrive and SharePoint and we're hoping to make improvements to how videos show up on SharePoint. We'd love to chat with people who have had experience creating SharePoint pages/sites with video content for work. We'll discuss the creation experience, how video content is added, and pain points with the current process. If you're available to join us for a 45 minute conversation, please sign up for a time and date that works for you using this link: https://calendly.com/sharepoint-videos/45min , and we'll send an invitation for a Teams meeting to the email you provided. If you have any questions, you can contact me at pacha@microsoft.com.
