Forum Discussion
jsutp88
Sep 01, 2020Copper Contributor
Teams not showing as muted
I have several users that are using the Jabra Evolve 75 headset with Teams. If they try to mute themselves using the headset, like the button or putting the mic boom in the up position, Teams does not show that they are muted. They are actually muted though. Other people on the call think that they are unmuted when they're actually muted. If they click the mute button inside of Teams, it does show as muted. I've run repairs on Office, disabled/re-enabled the Teams integration with Jabra Direct, but no luck. Any ideas on this?
- sooty314Copper ContributorI fixed this issue today by turning off the "Sync Device Buttons" feature under Settings/Devices, restarting Teams, then turning "Sync Device Buttons" back on and restarting Teams again.
Effectively switching it off and back on again.- ACNAFOCopper Contributor
I got this working by using the Jabra USB dongle instead of in-built bluetooth.
Can someone confirm if these features only work with the Jabra dongle or did you get this to work without the dongle as well?
- Armin_FeuchtCopper ContributorSome years old topic, but it can be still a problem. My Jabra Evolve 75 UC worked long and suddenly it had the same problem. No interaction between Teams and Headset. Not only mute state. Also missing busy light.
My IT department gave me this solution: Disable the device "Intel Smart Sound Technology for USB-Audio" in device manager.
Maybe it also helps other users with this problem. - ericshufroCopper Contributor
Any update on this?
I have an Evolve 65 and Teams always shows the transition from muted to unmuted when the boom mute button is pushed. However, the transition from unmuted to muted is never updated on the Teams app, despite the headset muting. I also wish the boom LED state would change when muted. Perhaps off when not muted and RED when muted?
- harmonjeffBrass Contributor
I am seeing this same issue again here in September 2022. For about 18 months prior to August 2022, the hardware mute status of my Jabra Evolve 75 UC headset was always in sync with the software mute status in both Microsoft Teams and Zoom. Sometime in August 2022 this changed. Now the mute status in Microsoft Teams is in sync with the mute status of the headset only about 50% of the time. The sync between the hardware mute status and software mute status in Zoom is still right 100% of the time, pointing to the hardware functioning properly and there being a software-level issue.
Means that if I want to talk on a call in MS Teams I can't just lower the boom arm down, I also have to check what the mute status is in Teams and manually click on the unmute button if the two are not in sync (which is a problem about 50% of the time). It is terribly distracting for my calls, having to worry about the mute status in the software being different from the hardware.
This started happening in August 2022, though I can't be sure it first became an issue with the MS Teams 1.5.00.22362 release. Here is more information on the versions of things.
- Computer: MacBook Pro, 16-inch, 2021 (M1)
- OS: macOS Monterey 12.5.1
- Running Jabra Direct version 6.3.22201. Preferred Softphone is set to Microsoft Teams in Jabra Direct settings.
- Jabra Evolve 75 UC with firmware version 2.38.0
- Jabra Link 370 with firmware version 1.87.0
I have tried unpairing the Jabra Evolve 75 from the Jabra Link 370 and then re-pairing them. No change to the observed issue and MS Teams is still out of sync with the mute status of the hardware about 50% of the time.
I have tried connecting the Jabra Evolve 75 directly via bluetooth instead of through the Jabra Link dongle. No change to the issue.
I have tried a USB wired connection for the Jabra Evolve 75. This does seem to improve the frequency of how often the mute in MS Teams is in sync with the hardware to about 75% working and 25% failure, but even at 25% failure this is a problem.
I have tried killing the Teams app and restarting it. I have tried killing the Jabra Direct app and restarting it. I have tried rebooting the Mac. The issue remains.
Also note that this all works perfectly in the Zoom application. 100% of the time the Zoom mute status is fully in sync with the mute status of the Evolve 75 headset. Raise the boom arm on the headset, Zoom shows mute is applied. Lower the boom arm on the headset, Zoom shows mute is not applied.
I realize the headset is the UC and not the MS version, but this issue with the software mute status not being in sync with the hardware mute status was not a problem over the previous 18 months. Seems like a software level issue happened in this time causing this issue.
- harmonjeffBrass Contributor
I have also tried disabling all audio processing features in Teams by disabling:
- Automatically adjust mic sensitivity
- Noise Suppression
- High fidelity music mode, which also disables Enable echo cancellation
I rebooted the Mac after changing these settings. No change to the issue.
- harmonjeffBrass ContributorI have also validated that the issue where the software mute status in Teams is in sync with the hardware mute states of the Evolve 75 UC only about 50% of the time even if the Zoom application is not running on the computer.
- matkinsonCopper ContributorFor me sync between boom arm and teams mute icon was restored by simply fully shutting down Teams and restarting. Wish I'd tried that before re-installing Jabra Direct & all the tips in this thread!
- LeonHiCopper Contributor
jsutp88 Let me share my experience. when I click the system audio, it shows "UC mono XXX" it didn't show the dongle name. I went to device management and delete and uninstall the UC mono XXX drive under sound tab. and then re-plug the dongle. The dongle name shows "LINK 360". then the mute/unmute function in teams works!
- areskageCopper Contributor
For me issue was solved by installing Jabra Direct from https://www.jabra.no/supportpages/jabra-direct#/#14501-14
Then setting Softphone Integration to Microsoft Teams as follows:
I had to temporarily quit (stop application) Microsoft Teams to be able to access the Jabra device in Jabra Direct.
- GuyLaRochelleCopper ContributorFor me, I noticed that when I also had Skype running along with Teams (for improved camera settings), the sync didn't work anymore.
I had to quite Skype, then sync was working again. Hi I have a Jabra Evolve 2 65T with a Jabra Link 380c. against the "perfect" setup it can happen that muting on Teams gets out of sync.
For Android it does not work great, for Windows App it is working as expected most of the times.
Make sure your firmware is updated. You can update the Link or Headset using the latest of Jabra Direct software.
The most common reason for being out of sync when you mute manually and also pull up the microphone or pressing the mute button.
Advice: do not turn on "automatically pair new devices". I had a support case because of this option with weird re-pairing issues with my Jabra Evolve 2 65T ultimately it was bluetooth DAB radio in the neightbourhood causing this. It took the support and me several weeks to find out because we suspected every other aspect from Windows 10 multiboot to a defective device.- RoxyLukeCopper ContributorSame for me, I'm still struggling to understand the logic behind mute on my 510 jabra device and Teams status.
I found the related setting in device configuration but it doesn't affect the behaviour.- RoxyLukeCopper Contributor