Feature Request: Extend Security Copilot inclusion (M365 E5) to M365 A5 Education tenants
Background At Ignite 2025, Microsoft announced that Security Copilot is included for all Microsoft 365 E5 customers, with a phased rollout starting November 18, 2025. This is a significant step forward for security operations. The gap Microsoft 365 A5 for Education is the academic equivalent of E5 — it includes the same core security stack: Microsoft Defender, Entra, Intune, and Purview. However, the Security Copilot inclusion explicitly covers only commercial E5 customers. There is no public roadmap or timeline for extending this benefit to A5 education tenants. Why this matters Education institutions face the same cybersecurity threats as commercial organizations — often with fewer dedicated security resources. The A5 license was positioned as the premium security offering for education. Excluding it from Security Copilot inclusion creates an inequity between commercial and education customers holding functionally equivalent license tiers. Request We would like Microsoft to: Confirm whether Security Copilot inclusion will be extended to M365 A5 Education tenants If yes, provide an indicative timeline If no, clarify the rationale and what alternative paths exist for education customers Are other EDU admins in the same situation? Would appreciate any upvotes or comments to help raise visibility with the product team.Sentinel to Defender Portal Migration - my 5 Gotchas to help you
The migration to the unified Defender portal is one of those transitions where the documentation covers "what's new" but glosses over what breaks on cutover day. Here are the gotchas that consistently catch teams off-guard, along with practical fixes. Gotcha 1: Automatic Connector Enablement When a Sentinel workspace connects to the Defender portal, Microsoft auto-enables certain connectors - often without clear notification. The most common surprises: Connector Auto-Enables? Impact Defender for Endpoint Yes EDR telemetry starts flowing, new alerts created Defender for Cloud Yes Additional incidents, potential ingestion cost increase Defender for Cloud Apps Conditional Depends on existing tenant config Azure AD Identity Protection No Stays in Sentinel workspace only Immediate action: Within 2 hours of connecting, navigate to Security.microsoft.com > Connectors & integrations > Data connectors and audit what auto-enabled. Compare against your pre-migration connector list and disable anything unplanned. Why this matters: Auto-enabled connectors can duplicate data sources - ingesting the same telemetry through both Sentinel and Defender connectors inflates Log Analytics costs by 20-40%. Gotcha 2: Incident Duplication The most disruptive surprise. The same incident appears twice: once from a Sentinel analytics rule, once from the Defender portal's auto-created incident creation rule. SOC teams get paged twice, deduplication breaks, and MTTR metrics go sideways. Diagnosis: SecurityIncident | where TimeGenerated > ago(7d) | summarize IncidentCount = count() by Title | where IncidentCount > 1 | order by IncidentCount desc If you see unexpected duplicates, the cause is almost certainly the auto-enabled Microsoft incident creation rule conflicting with your existing analytics rules. Fix: Disable the auto-created incident creation rule in Sentinel Automation rules, and rely on your existing analytics rule > incident mapping instead. This ensures incidents are created only through Sentinel's pipeline. Gotcha 3: Analytics Rule Title Dependencies The Defender portal matches incidents to analytics rules by title, not by rule ID. This creates subtle problems: Renaming a rule breaks the incident linkage Copying a rule with a similar title causes cross-linkage Two workspaces with identically named rules generate separate incidents for the same alert Prevention checklist: Audit all analytics rule titles for uniqueness before migration Document the title-to-GUID mapping as a reference Avoid renaming rules en masse during migration Use a naming convention like <Severity>_<Tactic>_<Technique> to prevent collisions Gotcha 4: RBAC Gaps Sentinel workspace RBAC roles don't directly translate to Defender portal permissions: Sentinel Role Defender Portal Equivalent Gap Microsoft Sentinel Responder Security Operator Minor - name change Microsoft Sentinel Contributor Security Operator + Security settings (manage) Significant - split across roles Sentinel Automation Contributor Automation Contributor (new) New role required Migration approach: Create new unified RBAC roles in the Defender portal that mirror your existing Sentinel permissions. Test with a pilot group before org-wide rollout. Keep workspace RBAC roles for 30 days as a fallback. Gotcha 5: Automation Rules Don't Auto-Migrate Sentinel automation rules and playbooks don't carry over to the Defender portal automatically. The syntax has changed, and not all Sentinel automation actions are available in Defender. Recommended approach: Export existing Sentinel automation rules (screenshot condition logic and actions) Recreate them in the Defender portal Run both in parallel for one week to validate behavior Retire Sentinel automation rules only after confirming Defender equivalents work correctly Practical Migration Timeline Phase 1 - Pre-migration (1-2 weeks before): Audit connectors, analytics rules, RBAC roles, and automation rules Document everything - titles, GUIDs, permissions, automation logic Test in a pilot environment first Phase 2 - Cutover day: Connect workspace to Defender portal Within 2 hours: audit auto-enabled connectors Within 4 hours: check for duplicate incidents Within 24 hours: validate RBAC and automation rules Phase 3 - Post-migration (1-2 weeks after): Monitor incident volume for duplication spikes Validate automation rules fire correctly Collect SOC team feedback on workflow impact After 1 week of stability: retire legacy automation rules Phase 4 - Cleanup (2-4 weeks after): Remove duplicate automation rules Archive workspace-specific RBAC roles once unified RBAC is stable Update SOC runbooks and documentation The bottom line: treat this as a parallel-run migration, not a lift-and-shift. Budget 2 weeks for parallel operations. Teams that rushed this transition consistently reported longer MTTR during the first month post-migration.Security Copilot Agents in Defender XDR: where things actually stand
With RSAC 2026 behind us and the E5 inclusion now rolling out between April 20 and June 30, anyone planning SOC workflows or sitting on a capacity budget needs to get a clear picture of what is GA, what is preview, and what was just announced. The marketing pages tend to blur those lines. This is my sober look at the current state, with the operational details that matter for adoption decisions. What is actually shipping right now The Phishing Triage Agent is GA. It only handles user-reported phish through Defender for Office 365 P2, but for most SOCs that is a meaningful chunk of the L1 queue. Verdicts come with a natural-language rationale rather than just a label, which is the part that determines whether analysts will trust it. The agent learns from analyst confirmations and overrides, so the feedback loop matters more than the initial setup. There is a setup detail that is easy to miss: the agent will not classify alerts that have already been suppressed by alert tuning. The built-in rule "Auto-Resolve - Email reported by user as malware or phish" needs to be off, and any custom tuning rules that touch this alert type need review. If you skip this, the agent runs on an empty queue and you wonder why nothing is happening. The Threat Intelligence Briefing Agent is also GA. It produces tenant-tailored intel briefings on a regular cadence. Useful, but lower operational impact than the triage agents. Copilot Chat in Defender went GA with the April 2026 update. Conversational Q&A inside the portal, grounded in your incident and entity data. This is the lowest-risk way to get value out of Security Copilot and probably where most teams should start. Public preview, worth watching The Dynamic Threat Detection Agent is the most technically interesting one. It runs continuously in the Defender backend, correlates across Defender and Sentinel telemetry, generates its own hypotheses, and emits a dynamic alert when the evidence converges. Detection source on the alert is Security Copilot. Each alert includes the structured fields (severity, MITRE techniques, remediation) plus a narrative explaining the reasoning. For EU tenants the residency point is worth confirming with whoever owns data protection in your org: the service runs region-local, so customer data and required telemetry stay inside the designated geographic boundary. During public preview it is enabled by default for eligible customers and is free. At GA, currently targeted for late 2026, it transitions to the SCU consumption model and can be disabled. The Threat Hunting Agent is also in public preview. Natural language to KQL with guided hunting. Lower stakes, but useful for teams without deep KQL expertise on hand. Announced at RSAC, still preview Two agents got the headlines in March: The Security Alert Triage Agent extends the agentic triage approach beyond phishing into identity and cloud alerts. The longer-term direction is consolidating phishing, identity, and cloud triage under a single agent. Rollout is from April 2026, in preview. The Security Analyst Agent is the multi-step investigation agent. Deeper context across Defender and Sentinel, prioritised findings, transparent reasoning trace. Preview since March 26. Both look promising on paper, but Microsoft's history of preview features that take a long time to mature is well-documented. I would not plan production workflows around either of them yet. What you actually get with the E5 inclusion This is the licensing change most people are dealing with right now. Security Copilot has been part of the E5 product terms since January 1, 2026. Tenant rollout is phased between April 20 and June 30, 2026, with a 7-day notification before activation. The numbers: 400 SCUs per month for every 1,000 paid user licenses Capped at 10,000 SCUs per month, which you hit at around 25,000 seats Linear scaling below that, so a 3,000-seat tenant gets 1,200 SCUs per month No rollover, the pool resets monthly What is included: chat, promptbooks, agentic scenarios across Defender, Entra, Intune, Purview, and the standalone portal. Agent Builder and the Graph APIs are in. If you also run Sentinel, the included SCUs apply to Security Copilot scenarios there. What is not included: Sentinel data lake compute and storage. Those still run through Azure on the regular meters. Beyond the included pool you pay 6 USD per SCU pay-as-you-go, with 30 days notice before that mode kicks in. Practical things worth knowing before activation A few details that are easy to miss in the docs: Under System > Settings > Copilot in Defender > Preferences, switch from Auto-generate to Generate on demand. Auto-generate will burn SCUs on incidents nobody is going to look at. Generate on demand gives you direct control. In the Security Copilot portal workspace settings, check the data storage location and the data sharing toggle. Data sharing is on by default, which means Microsoft uses interaction data for product improvement. If your compliance position does not allow that, change it before agents start running. Changing it requires the Capacity Contributor role. Agent runs are not equivalent to the same number of analyst chat prompts. A triage agent processing fifty alerts in one run consumes meaningfully more SCUs than fifty manual prompts on the same data. If you have a high-volume phishing pipeline, model that out before you flip the switch broadly. The usage dashboard in the Security Copilot portal breaks down consumption by day, user, and scenario. Output quality depends on telemetry quality. Flaky connectors, gaps in log sources, or a high baseline of misconfigured alerts will produce verdicts that match. Connector health monitoring (the SentinelHealth table in Advanced Hunting is a sensible starting point) is a precondition. The agents only improve if analysts feed the override loop. If your team treats the verdicts as background noise rather than confirming or correcting them, the feedback signal is lost and calibration stays where it shipped. That is a process problem, not a product problem, but it determines whether any of this is worth the SCUs. A reasonable adoption order A rough sequence that minimises capacity surprises: Copilot Chat in Defender first. Lowest risk, immediate value through natural language Q&A in the investigation context. Phishing Triage Agent on a controlled subset, with a review cadence in place. Check the built-in tuning rules first. Watch the SCU dashboard for the first month before adding anything else. Let the Dynamic Threat Detection Agent run while it is in public preview, since it is default-on and free anyway. Compare its alerts against existing Sentinel detections. Security Alert Triage Agent for identity and cloud once the phishing baseline is stable. Establish a monthly review covering agent decisions, false-positive rate, SCU cost, and MTTD/MTTR trends. Technically, agentic triage is moving past phishing into identity and cloud, and the Dynamic Threat Detection Agent represents a genuine attempt at the false-negative problem rather than just another rule engine. Lizenziell, the E5 inclusion removes the biggest barrier to adoption that previously existed. The risk is enabling everything at once. Agents that nobody reviews are agents that consume capacity without delivering value, and the SCU dashboard is the only thing that will tell you that is happening. One agent, one use case, a 30-day baseline, then the next one. The order matters more than the speed.
URL Hyperlinking phishing training
Mi using the Defender phishing simulations to perform testing. When creating a positive reinforcement email that goes to the person you have the option to use default text or put in your own text. When I put in my own text I have lines in the text, but when it renders the lines are not displayed so it looks like a bunch of text crammed together. Any idea how to get these lines to display?
Unified detection rule management
Hi, I attended the webinar yesterday regarding the new unified custom detection rules in Defender XDR. I was wondering about the management of a library of rules. As with any SOC, our solution has a library of custom rules which we manage in a release cycle for a number of clients in different Tenants. To avoid having to manage rules individually we use the JSON approach, importing the library so it will update rules that we need to tune. Currently I'm not seeing an option to import unified detection rules in Defender XDR via JSON. Is that a feature that will be added? Thanks Ziv
Add Privacy Scrub Service to Microsoft Defender?
Microsoft Defender protects accounts against phishing and malware, but attackers increasingly exploit nuisance data broker sites that publish personal information (names, emails, addresses). These sites are scraped to personalize phishing campaigns, making them harder to detect. I propose a premium Defender add‑on that automatically files opt‑out requests with major data brokers (similar to DeleteMe).
Hunting for MFA manipulations in Entra ID tenants using KQL
The following article, Hunting for MFA manipulations in Entra ID tenants using KQL proved to be an invaluable resource in my search for an automated way to notify users of MFA modifications. I've adapted the KQL query to function within Defender Advanced Hunting or Azure Entra, my objective is to establish an alert that directly E-Mails the affected user, informing them of the MFA change and advising them to contact security if they did not initiate it. While the query runs correctly under Defender Advanced Hunting, I'm currently unable to create a workable custom alert because no "ReportId" is being captured. Despite consulting with Copilot, Gemini, CDW Support, and Microsoft Support, no workable solution has been achieved. Any insight would be greatly appreciated - Thank You! //Advanced Hunting query to parse modified: //StrongAuthenticationUserDetails (SAUD) //StrongAuthenticationMethod (SAM) let SearchWindow = 1h; let AuthenticationMethods = dynamic(["TwoWayVoiceMobile","TwoWaySms","TwoWayVoiceOffice","TwoWayVoiceOtherMobile","TwoWaySmsOtherMobile","OneWaySms","PhoneAppNotification","PhoneAppOTP"]); let AuthenticationMethodChanges = CloudAppEvents | where ActionType == "Update user." and RawEventData contains "StrongAuthenticationMethod" | extend Target = tostring(RawEventData.ObjectId) | extend Actor = tostring(RawEventData.UserId) | mv-expand ModifiedProperties = parse_json(RawEventData.ModifiedProperties) | where ModifiedProperties.Name == "StrongAuthenticationMethod" | project Timestamp,Actor,Target,ModifiedProperties,RawEventData,ReportId; let OldValues = AuthenticationMethodChanges | extend OldValue = parse_json(tostring(ModifiedProperties.OldValue)) | mv-apply OldValue on (extend Old_MethodType=tostring(OldValue.MethodType),Old_Default=tostring(OldValue.Default) | sort by Old_MethodType); let NewValues = AuthenticationMethodChanges | extend NewValue = parse_json(tostring(ModifiedProperties.NewValue)) | mv-apply NewValue on (extend New_MethodType=tostring(NewValue.MethodType),New_Default=tostring(NewValue.Default) | sort by New_MethodType); let RemovedMethods = AuthenticationMethodChanges | join kind=inner OldValues on ReportId | join kind=leftouter NewValues on ReportId,$left.Old_MethodType==$right.New_MethodType | where Old_MethodType != New_MethodType | extend Action = strcat("Removed (" , AuthenticationMethods[toint(Old_MethodType)], ") from Authentication Methods.") | extend ChangedValue = "Method Removed"; let AddedMethods = AuthenticationMethodChanges | join kind=inner NewValues on ReportId | join kind=leftouter OldValues on ReportId,$left.New_MethodType==$right.Old_MethodType | where Old_MethodType != New_MethodType | extend Action = strcat("Added (" , AuthenticationMethods[toint(New_MethodType)], ") as Authentication Method.") | extend ChangedValue = "Method Added"; let DefaultMethodChanges = AuthenticationMethodChanges | join kind=inner OldValues on ReportId | join kind=inner NewValues on ReportId | where Old_Default != New_Default and Old_MethodType == New_MethodType and New_Default == "true" | join kind=inner OldValues on ReportId | where Old_Default1 == "true" and Old_MethodType1 != New_MethodType | extend Old_MethodType = Old_MethodType1 | extend Action = strcat("Default Authentication Method was changed to (" , AuthenticationMethods[toint(New_MethodType)], ").") | extend ChangedValue = "Default Method"; let AuthenticationMethodReport = union RemovedMethods,AddedMethods,DefaultMethodChanges | project Timestamp,Action,Actor,Target,ChangedValue,OldValue=case(isempty(Old_MethodType), "",strcat(Old_MethodType,": ", AuthenticationMethods[toint(Old_MethodType)])),NewValue=case(isempty( New_MethodType),"", strcat(New_MethodType,": ", AuthenticationMethods[toint(New_MethodType)])); let AuthenticationDetailsChanges = CloudAppEvents | where ActionType == "Update user." and RawEventData contains "StrongAuthenticationUserDetails" | extend Target = tostring(RawEventData.ObjectId) | extend Actor = tostring(RawEventData.UserId) | extend ReportId= tostring(RawEventData.ReportId) | mvexpand ModifiedProperties = parse_json(RawEventData.ModifiedProperties) | where ModifiedProperties.Name == "StrongAuthenticationUserDetails" | extend NewValue = parse_json(replace_string(replace_string(tostring(ModifiedProperties.NewValue),"[",""),"]","")) | extend OldValue = parse_json(replace_string(replace_string(tostring(ModifiedProperties.OldValue),"[",""),"]","")) | mv-expand NewValue | mv-expand OldValue | where (tostring( bag_keys(OldValue)) == tostring(bag_keys(NewValue))) or (isempty(OldValue) and tostring(NewValue) !contains ":null") or (isempty(NewValue) and tostring(OldValue) !contains ":null") | extend ChangedValue = tostring(bag_keys(NewValue)[0]) | extend OldValue = tostring(parse_json(OldValue)[ChangedValue]) | extend NewValue = tostring(parse_json(NewValue)[ChangedValue]) | extend OldValue = case(ChangedValue == "PhoneNumber" or ChangedValue == "AlternativePhoneNumber", replace_strings(OldValue,dynamic([' ','(',')']), dynamic(['','',''])), OldValue ) | extend NewValue = case(ChangedValue == "PhoneNumber" or ChangedValue == "AlternativePhoneNumber", replace_strings(NewValue,dynamic([' ','(',')']), dynamic(['','',''])), NewValue ) | where tostring(OldValue) != tostring(NewValue) | extend Action = case(isempty(OldValue), strcat("Added new ",ChangedValue, " to Strong Authentication."),isempty(NewValue),strcat("Removed existing ",ChangedValue, " from Strong Authentication."),strcat("Changed ",ChangedValue," in Strong Authentication.")); union AuthenticationMethodReport, AuthenticationDetailsChanges | extend AccountUpn = Target | where Timestamp > ago(SearchWindow) //| summarize count() by Timestamp, Action, Actor, Target, ChangedValue, OldValue, NewValue, ReportId, AccountDisplayName, AccountId, AccountUpn | summarize arg_max(Timestamp, *) by Action | project Timestamp, Action, Actor, Target, ChangedValue, OldValue, NewValue, ReportId, AccountDisplayName, AccountId, AccountUpn | sort by Timestamp desc
