Windows event collector (WEC) troubles
Hi all. I have really frustrating issue I can`t resolve. We have set up WEC, a long time ago... Now I upgraded in-place to server 2025 and it`s behaving really weird. Problem is this: I created new subscription and my PC was sending events just fine yesterday. I rebooted server and my PC, still all is fine. Turned off my PC, went to sleep, started working in the morning and NO logs from my machine in WEC. At all. Other PCs also randomy sending logs some yes some no. So I tested WinRM connectivity all fine. Error on my PC: The forwarder is having a problem communicating with subscription manager at address http://MYWECSERVER:5985/wsman/SubscriptionManager/WEC. Error code is 2150859263 and Error Message is <f:WSManFault xmlns:f="http://schemas.microsoft.com/wbem/wsman/1/wsmanfault" Code="2150859263" Machine="MYWECSERVER"><f:Message> <f:ProviderFault provider="Subscription Manager Provider" path="%systemroot%\system32\WsmSvc.dll"> <f:WSManFault xmlns:f="http://schemas.microsoft.com/wbem/wsman/1/wsmanfault" Code="2150859263" Machine="MYWECSERVER"> <f:Message>The event source of the push subscription is in disable or inactive on the Event controller server. </f:Message></f:WSManFault></f:ProviderFault></f:Message></f:WSManFault>. I have also some errors on WEC server: The Subscription DomainComputers could not be activated on target machine MY-PERSONAL-PC due to communication error. Error Code is 0. All retries have been performed before reaching this point and so the subscription will remain inactive on this target until subscription is resubmitted / reset. Additional fault message: eventsource is in either disable or inactive state OR The Subscription DomainComputers could not be activated on target machine MY-PERSONAL-PC due to communication error. Error Code is 20. All retries have been performed before reaching this point and so the subscription will remain inactive on this target until subscription is resubmitted / reset. Additional fault message: eventsource is in either disable or inactive state Also runtime status is like this: A lot of Active computers, mine is in yellow Inactive state... I have NO idea how to fix this, and why it works for some clients and not for others and most perplexing question, why it worked yesterday until sleep. Just like that WEC sets status to Inactive and then my PC sends logs and does not change status back to Active. Thanks for all suggestions!
Noob needs help with RDP Services
I am new to Windows server management. I setup a 2019 Server in a VM (Hyper-V). I installed the licenses we got for RDP from MS after installing the Remote Desktop Services. I am getting an error about Remote Desktop Licensing Mode is not configured. Tells me to use Server Manger to specify RD Connection Broker. Either I neglected to install it or configure it, not sure. Articles I find say go to Server Manager -> Remote Desktop Services -> Overview... BUT, that tells me I am logged in with a local account but must use a domain account to manage servers and collections. Again, not using a DC. This server is not part of a domain. We do not run AD internally only AzureAD online. We have 1 program we still run internally and users RDP to it. Should I remove the service and reinstall? What about the licenses I added already? How to I keep them? Any assistance will be greatly appreciated... J
LDAPS and Certificate Creation
Hi, I've been asked to setup secure LDAP and convert all of our LDAP services to LDAPS. Something totally new to me, so I've been trying to teach myself. One issue I've run into is I'm not finding much information on how to create the secure certificates, so I'm looking for guidance. An ex-colleague stood up a certificate authority server (CA) and an intermediate certificate authority server (IA). Currently, the CA is powered down, which seems to be a best practice. The IA server is up and running, however, when I go to my domain controller (DC) and look at the Local Computer\Personal\Certificates section I do see a certificate, but it was issued by the CA and expired last summer. Shouldn't that certificate have been issued by the IA? How do I go about issuing certificates for this and other purposes, like all of the web-based control systems in my network like vCenter that complain about not being secure when I log into them? I've been searching for tutorials on the subject but only seem to find tutorials on how to install it, not how to use certsrv to issue and renew certificates. Does anyone know of any tutorials or walk-throughs like this? Thanks in advance!
Hyper-V: How do VMs communicate with external?
Simple scenario: VM --> vNIC --> vSwitch (external) --> physNIC --> physSwitch The vNIC assigned to the VM has MAC address aa:aa:aa:aa:aa:aa, the physical NIC (physNIC; the vSwitch of type external is connected to it) has bb:bb:bb:bb:bb:bb. What mechanism ensures that when the VM sends a network packet to the external network (the physical network connected to the physical switch physSwitch), the MAC address of its vNIC (aa:aa:aa:aa:aa:aa) is used, and not the MAC address of the physNIC (bb:bb:bb:bb:bb:bb)? In other words: what makes physSwitch "see" aa:aa:aa:aa:aa:aa when the VM communicates to an external endpoint?ISO version reporting
Is there a standard way in which the Windows installer ISOs can be interrogated for which version of Windows is on them? This is a bit convoluted so I'll explain the use case. When installing W10 on one of the last generation of x64 Apple Macs, the Boot Camp installer will take the ISO and prepare it by injecting drivers - particularly that for the T2 security chip which handles the first part of the boot process and is the storage controller, among other things. With W10 going out of support (and W11 not really an option due to the hardware requirements) I have been looking at trying to install one ofthe W10-based server versions instead. These are obviously very similar in structure and would probably install and work from a technical standpoint - but if I try it the Boot Camp installer reports that the ISOs aren't Windows 10, and won't proceed. I'm basically looking to clarify whether there is any minor editing of the ISO (or files on it) which can be done to convince Boot Camp that actually this is W10. Anyone know? ThanksPowerShell counterpart for Failover Cluster Manager "Live Migration Settings"
In Failover Cluster Manager, there's "Live Migration Settings" where I can define what cluster networks I want to carry live migration traffic. Even after some research, I cannot find a PowerShell cmdlet that lets me do the same...
DNS Server cannot lookup domain AWS
Hi Everyone, I have an issue with the DNS service on Windows Server 2019. I have a CNAME record pointing from an internal domain to a domain hosted on Route53. However, this record frequently returns an 'unknown host' error. My server is already connected to the internet, and the record has a TTL 60. Please help me with this case.Windows 2022 server to Windows 2025 Active directory migration
Hi In the lab I had 2 servers dc1 which is Windows 2022 and dc2 which was 2025 server. I transferred all roles from 2022 and this was working perfect but then I made one mistake by demoting dc1 2022 using GUI server and looks like that took out whole domain dc2 2025 has all the roles however when I try to open Active directory users and computers this is what i get Naming information cannot be locateed because the specified domain either doesnt exist or couldnt be contacted This is when I try to open Active directory users and computers. Interestingly enough in my workspace I just shut down domain controller that i want to decomission and then cleanup metadata but in this instance i wanted to try demote domain controller and this is the process that took domain out Now I dont have backup all I have ntds dit file and I am not sure whether it is possible to restore domain with just this file dc2 is still domain controller but even netdom query fsmo says no domain controllers
Workgroup Failover Cluster backup service account
Hello, We have built a workgroup Hyper-V cluster. Live migration works well when taking a node. But the only account that we can use is the one used at the cluster creation. I found some post about account creating the same user / password on both node and grant cluster full access. But this account gets access denied in the cluster manager. But I would like to have specific account for backup and also a nominative account for administration. I just read Orin Thomas post , but it did not help. Have someone ever be able to use a different local local account to manager a workgroup cluster ? Or to achieve this need, I must stick to AD registered servers. Thanks for any help. Jean Marie