Forum Discussion
Hierarchical Chart Customisation
Hi all,
Is there some way to change the text anchor to be the top of the text box rather than the center?
Also, is there some way to uniformly customise elements? Selecting a dozen individual links is next to impossible... Who in their right mind thought that individual elements without contextual element cycling was a good idea?
Setting the Layout to horizontal also locks the vertical height?
Ling.
ps. Is it time to just use Ink...?
Yes, that first one is actually possible, though it's buried. Click inside one of the boxes, right-click and open Format Shape, then go to Text Options and the Text Box section — there's a Vertical alignment setting in there, and Top is one of the choices. That moves the text to the top of that shape instead of sitting in the middle. It applies to the shape you have selected, so it's worth testing on one box first.
For the uniform part, you don't have to do the links one by one. Click the first shape, then hold Ctrl and click the others you want to change, and the formatting you apply — fill, line colour, font — goes onto all of them at once. For the look of the whole thing, the SmartArt Design tab's Change Colors and SmartArt Styles are the quickest way to make everything consistent in one go, and the Text Pane is handy for editing the text without hunting for each box.
The height problem is the layout fighting you — once you pick a SmartArt layout, that layout decides the shape sizes, so dragging a height back doesn't stick. If you need full control over each box, use SmartArt Design, Convert, Convert to Shapes. That breaks the graphic into ordinary shapes, and then each one can be resized, moved and anchored on its own. Just do it on a copy, because converting can't be undone back into a SmartArt layout.
8 Replies
- LingwisyerTin Contributor
Hm... You can only mark one post are the solution... Thanks Charles.
- AveryMorgan200Brass Contributor
If this is an Office SmartArt hierarchy, try selecting the shape’s border rather than the text, then right-click → Format Shape → Text Options → Text Box → Vertical alignment → Top. The top internal margin controls how far the text sits below the edge.
For consistent formatting, start with SmartArt Design → SmartArt Styles or Change Colors. These apply across the diagram, although they don’t give you full control over every connector. Ctrl-click lets you select multiple shapes or connectors where the layout permits it.
SmartArt also manages positioning and sizing automatically. Changing to a horizontal layout can constrain the height or readjust your manual changes; it isn’t as freely editable as a collection of ordinary shapes.
If you need precise control, duplicate the diagram first. In PowerPoint, SmartArt Design → Convert → Convert to Shapes lets you edit the resulting shapes and lines individually. Ungroup as needed, then use the Selection Pane to help select multiple objects and format them together. You lose the automatic hierarchy layout and Text Pane editing, so keep the original.
- LingwisyerTin Contributor
I know that ctrl+click lets you select multiple shapes, but given that these connectors overlap each other, I am needing to tab through the selection to get the correct element, but since the selection cycling is not contextural, I sometimes have to tab through every other text box and line before I get the one I want... Or is there some other way to cycle the selection?
Ling.
- AmezingtechsataraIron Contributor
Yes, that first one is actually possible, though it's buried. Click inside one of the boxes, right-click and open Format Shape, then go to Text Options and the Text Box section — there's a Vertical alignment setting in there, and Top is one of the choices. That moves the text to the top of that shape instead of sitting in the middle. It applies to the shape you have selected, so it's worth testing on one box first.
For the uniform part, you don't have to do the links one by one. Click the first shape, then hold Ctrl and click the others you want to change, and the formatting you apply — fill, line colour, font — goes onto all of them at once. For the look of the whole thing, the SmartArt Design tab's Change Colors and SmartArt Styles are the quickest way to make everything consistent in one go, and the Text Pane is handy for editing the text without hunting for each box.
The height problem is the layout fighting you — once you pick a SmartArt layout, that layout decides the shape sizes, so dragging a height back doesn't stick. If you need full control over each box, use SmartArt Design, Convert, Convert to Shapes. That breaks the graphic into ordinary shapes, and then each one can be resized, moved and anchored on its own. Just do it on a copy, because converting can't be undone back into a SmartArt layout.
- LingwisyerTin Contributor
Where might the Convert option be? I do not have a button for it on the SmartArt Design tab... Avery mentioned PowerPoint, but I am in Word...
Ling.
- Charles_KenyonBronze Contributor
Convert to Shape is not on the Ribbon. It could be added but the one you could add does not seem to work with SmartArt anyway.
Convert to Shapes is available on the Ribbon in PowerPoint. PowerPoint is a bit better at graphic manipulation and design than is Word. Try copying your SmartArt and pasting into a PowerPoint slide and manipulating there. You could then copy it back into Word.
Once it is converted to Shapes, you can use the Shape Format tab and change the text alignment.
See also: How to Convert SmartArt to Shapes in Word. https://www.officetooltips.com/word_2016/tips/how_to_convert_smartart_to_the_shapes_in_word (Lots of obnoxious ads, though.)
Warning! Do this with a copy, at least until you are sure. I know of no way to reverse the process and change the shapes back into SmartArt. You lose the SmartArt controls.
As for why it is centered, these were designed to be writ large, as graphics, with detail in the surrounding text.The text in SmartArt starts out quite large, by design. They are intended to show the relationships between ideas or people, not to give all the information about those ideas or people.
These are not the most customizable features.
https://www.geeksforgeeks.org/ms-word/how-to-insert-smartart-in-microsoft-word/
Learn more about SmartArt Graphics | Microsoft Support
This is a user-to-user support forum.
Microsoft is not hearing about your problems from what you post here. You are discussing a problem with your fellow users here. We can give good advice about how to work with Word as it is and give suggestions for making it work properly. Such troubleshooting, advice, and suggestions may be exactly what you need.
If you want to send a message to Microsoft, though, designers and their supervisors do see feedback. (You will almost certainly not get a direct response to that feedback but they do see it.)
Here is more about that:
I suggest using the public feedback portal so other users can see your feedback, comment and vote. If you want, you can post the URL of your feedback with your question here to lead others with the same problem to your feedback. Be the “squeaky wheel” that gets fixed!