Forum Discussion
My Laptop Doesn't Connect to the External Monitor after the Latest Windows 11 Update 16.02.2023
My Laptop Doesn't Connect to the External Monitor after the Latest Windows 11 Update as of date 16.02.2023 The system does not install these updates even though I have tried many times. It just go...
I have solved my problem.
Solution: Bios > Config > Thunderbolt (TM) 3 >
Thunderbolt BIOS Assist Mode [Enabled]
Security Level [User Authoriezed] (Default for me)
Support in Pre Boot Environment:
Thunderbolt (TM) device [Enabled]
How I found (Solution Steps):
I saw critical warning message on my product's webpage: https://pcsupport.lenovo.com/tr/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-carbon-6th-gen-type-20kh-20kg/solutions/ht508988
1) I've tried only Intel Thunderbolt software solution (uninstall, install) and that didn't help.
2) I've skipped Lenovo Vantage solution just because I don't need that software most of the time.
3) I saw "Firmware install requires that the Intel Thunderbolt IO Controller must be enabled in BIOS." on the same page. I thought latest Windows Update or Optional Updates caused some critical problems in Bios (like compatibility issues etc.) so I opened BIOS and changed some settings which I gave above.
That's it. I hope this helps who face this problem.
By the way, thanks for your effort to help me: Mark_Albin
Solution: Bios > Config > Thunderbolt (TM) 3 >
Thunderbolt BIOS Assist Mode [Enabled]
Security Level [User Authoriezed] (Default for me)
Support in Pre Boot Environment:
Thunderbolt (TM) device [Enabled]
How I found (Solution Steps):
I saw critical warning message on my product's webpage: https://pcsupport.lenovo.com/tr/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-carbon-6th-gen-type-20kh-20kg/solutions/ht508988
1) I've tried only Intel Thunderbolt software solution (uninstall, install) and that didn't help.
2) I've skipped Lenovo Vantage solution just because I don't need that software most of the time.
3) I saw "Firmware install requires that the Intel Thunderbolt IO Controller must be enabled in BIOS." on the same page. I thought latest Windows Update or Optional Updates caused some critical problems in Bios (like compatibility issues etc.) so I opened BIOS and changed some settings which I gave above.
That's it. I hope this helps who face this problem.
By the way, thanks for your effort to help me: Mark_Albin
ismailulusoy You're me savior!
I had confronted the problem that the extended VGA monitor (through type C hub) didn't display when I updated to Windows 11.
For my laptop, I change the setting "Security Level to be [User Authoriezed] " and it works.
PS. My laptop's BIOS has no other settings
Thank you a lot
