Assess Azure DDoS Protection Status Across Your Environment
Introduction Distributed Denial of Service (DDoS) attacks continue to be one of the most prevalent threats facing organizations with internet-facing workloads. Azure DDoS Protection provides cloud-scale protection against L3/4 volumetric attacks, helping ensure your applications remain available during an attack. However, as Azure environments grow, maintaining visibility into which resources are protected and whether diagnostic logging is properly configured becomes increasingly challenging. Security teams often struggle to answer basic questions: Which Public IP addresses are protected by Azure DDoS Protection? Are we using IP Protection or Network Protection (DDoS Protection Plan)? Is diagnostic logging enabled for protected resources? To address these questions at scale, we’ve developed a PowerShell script that assesses your Azure DDoS Protection posture across all subscriptions. Understanding Azure DDoS Protection SKUs Azure offers three DDoS Protection tiers: Protection Type Description Scope Network Protection Enterprise-grade protection via a DDoS Protection Plan attached to VNETs All Public IPs in protected VNETs IP Protection Per-IP protection for individual Public IP addresses Individual Public IP For more details, see Azure DDoS Protection overview. The Assessment Script The Check-DDoSProtection.ps1 script provides a full view of DDoS Protection status across your Azure environment. This section covers the script’s key capabilities and the resource types it supports. Key Features Multi-subscription support: Scan a single subscription or all subscriptions you have access to DDoS Protection status: Identifies which Public IPs are protected and which SKU is being used VNET correlation: Automatically determines the VNET associated with each Public IP to assess Network Protection inheritance Diagnostic logging check: Verifies if DDoS diagnostic logs are configured for protected resources CSV export: Export results for further analysis or reporting Prerequisites Before running the script, ensure you have: Azure PowerShell modules installed: Run the following commands in PowerShell (version 5.1+) or PowerShell Core to install the required Azure modules. No special permissions are needed, these will install in your user profile. Install-Module -Name Az.Accounts -Scope CurrentUser -Force Install-Module -Name Az.Network -Scope CurrentUser -Force Install-Module -Name Az.Monitor -Scope CurrentUser -Force Appropriate Azure permissions: o Reader role on subscriptions you want to scan o Microsoft.Network/publicIPAddresses/read o Microsoft.Network/virtualNetworks/read o Microsoft.Insights/diagnosticSettings/read Azure login: Authenticate to Azure before running the script. This opens a browser window for interactive sign-in. Connect-AzAccount How to Use the Script Run the script from a PowerShell session where you’ve already authenticated with Connect-AzAccount. The account must have Reader role on the subscriptions you want to scan. Download the Script You can download the script from: - GitHub: Check-DDoSProtection.ps1 Basic Usage: Scan Current Subscription Scans only the subscription currently selected in your Azure context. .\Check-DDoSProtection.ps1 Scan a Specific Subscription Scans a single subscription by its ID. .\Check-DDoSProtection.ps1 -SubscriptionId "12345678-1234-1234-1234-123456789012" Scan All Subscriptions Scans every subscription your account has Reader access to. .\Check-DDoSProtection.ps1 -AllSubscriptions Export Results to CSV Exports the assessment results to a CSV file for reporting or further analysis. .\Check-DDoSProtection.ps1 -AllSubscriptions -ExportPath "C:\Reports\DDoS-Report.csv" Large Environment Options For organizations with many subscriptions or thousands of Public IPs, use the following parameters to handle errors gracefully and avoid API throttling. .\Check-DDoSProtection.ps1 -AllSubscriptions ` -ContinueOnError ` -SavePerSubscription ` -ExportPath "C:\Reports\DDoS-Report.csv" ` -ThrottleDelayMs 200 Parameters for large environments: Parameter Description -ContinueOnError Continue scanning even if a subscription fails (e.g., access denied) -SavePerSubscription Save a separate CSV file for each subscription -ThrottleDelayMs Delay between API calls to avoid throttling (default: 100ms) Understanding the Output The script provides both console output and optional CSV export. This section covers what each output type contains. Console Output The script displays a summary table for each subscription: Summary Statistics At the end of each subscription scan: CSV Export Columns Column Description Subscription Name of the Azure subscription Public IP Name Name of the Public IP resource Resource Group Resource group containing the Public IP Location Azure region IP Address Actual IP address (or “Dynamic” if not allocated) IP SKU Basic or Standard DDoS Protected Yes/No Risk Level High (unprotected) / Low (protected) DDoS SKU Network Protection, IP Protection, or None DDoS Plan Name Name of the DDoS Protection Plan (if applicable) VNET Name Associated Virtual Network name Associated Resource Resource the Public IP is attached to Resource Type Type of associated resource (VM, AppGw, LB, etc.) Diagnostic Logging Configured/Not Configured/N/A Log Destination Log Analytics, Storage, Event Hub, or None Recommendation Suggested action for unprotected resources Sample Scenarios Scenario 1: Protected Application Gateway Public IP Name: appgw-frontend-pip DDoS Protected: Yes DDoS SKU: Network Protection DDoS Plan Name: contoso-ddos-plan VNET Name: production-vnet Diagnostic Logging: Configured (Log Analytics) Risk Level: Low Explanation: The Application Gateway’s Public IP inherits protection from the VNET which has a DDoS Protection Plan attached. Diagnostic logging is properly configured. Scenario 2: Unprotected External Load Balancer Public IP Name: external-lb-pip DDoS Protected: No DDoS SKU: VNET not protected VNET Name: (External LB) Diagnostic Logging: N/A Risk Level: High Recommendation: Enable DDoS Protection on associated VNET or enable IP Protection Explanation: This external Load Balancer’s Public IP is not in a protected VNET. The script flags this as high risk. Scenario 3: IP Protection Without Logging Public IP Name: standalone-api-pip DDoS Protected: Yes DDoS SKU: IP Protection VNET Name: - Diagnostic Logging: Not Configured Risk Level: Low Recommendation: Configure diagnostic logging for DDoS-protected resources Explanation: The IP has IP Protection enabled, but diagnostic logging is not configured. While protected, you won’t have visibility into attack telemetry. Troubleshooting Script Doesn’t Find All Subscriptions Use the following command to list your Azure role assignments and verify you have Reader access to the target subscriptions. Run this from Azure Cloud Shell or a local PowerShell session after authenticating with Connect-AzAccount. # Check your role assignments Get-AzRoleAssignment -SignInName (Get-AzContext).Account.Id | Select-Object Scope, RoleDefinitionName API Throttling The script includes built-in retry logic for API throttling. If you still experience rate limit errors, increase the delay between API calls. Run this from the directory containing the script. .\Check-DDoSProtection.ps1 -AllSubscriptions -ThrottleDelayMs 500 Access Denied for Specific Resources The script displays “(Access Denied)” for VNETs or resources you don’t have permission to read. This doesn’t affect the overall assessment but may result in incomplete VNET information. Summary This guide covered how to use the Check-DDoSProtection.ps1 script to identify unprotected Public IP addresses, determine which DDoS SKU (Network Protection vs. IP Protection) is in use, verify diagnostic logging configuration, and assess risk levels across all subscriptions. Running this script periodically helps security teams track protection coverage as their Azure environment evolves. Related Resources Azure DDoS Protection Overview Azure DDoS Protection SKU Comparison Configure DDoS Protection Diagnostic Logging Best Practices for Azure DDoS Protection Zero Trust with Azure DDoS Protection
Navigating the 2025 holiday season: Insights into Azure’s DDoS defense
The holiday season continues to be one of the most demanding periods for online businesses. Traffic surges, higher transaction volumes, and user expectations for seamless digital experiences all converge, making reliability a non-negotiable requirement. For attackers, this same period presents an opportunity: even brief instability can translate into lost revenue, operational disruption, and reputational impact. This year, the most notable shift wasn’t simply the size of attacks, but how they were executed. We observed a rise in burst‑style DDoS events, fast-ramping, high-intensity surges distributed across multiple resources, designed to overwhelm packet processing and connection-handling layers before traditional bandwidth metrics show signs of strain. From November 15, 2025 through January 5, 2026, Azure DDoS Protection helped customers maintain continuity through sustained Layer 3 and Layer 4 attack traffic, underscoring two persistent realities: Most attacks remain short, automated, and frequently create constant background attack traffic. The upper limit of attacker capability continues to grow, with botnets across the industry regularly demonstrating multi‑Tbps scale. The holiday season once again reinforced that DDoS resilience must be treated as a continuous operational discipline. Rising volume and intensity Between November 15 and January 5, Azure mitigated approximately 174,054 inbound DDoS attacks. While many were small and frequent, the distribution revealed the real shift: 16% exceeded 1M packets per second (pps). ~3% surpassed 10M pps, up significantly from 0.2% last year. Even when individual events are modest, the cumulative impact of sustained attack traffic can be operationally draining—consuming on-call cycles, increasing autoscale and egress costs, and creating intermittent instability that can provide cover for more targeted activity. Operational takeaway: Treat DDoS mitigation as an always-on requirement. Ensure protection is enabled across all internet-facing entry points, align alerting to packet rate trends, and maintain clear triage workflows. What the TCP/UDP mix is telling us this season TCP did what it usually does during peak season: it carried the fight. TCP floods made up ~72% of activity, and ACK floods dominated (58.7%) a reliable way to grind down packet processing and connection handling. UDP was ~24%, showing up as sharp, high-intensity bursts; amplification (like NTP) appeared, but it wasn’t the main play. Put together, it’s a familiar one-two punch: sustain TCP/ACK pressure to exhaust the edge, then spike UDP to jolt stability and steal attention. The goal isn’t just to saturate bandwidth, it’s to push services into intermittent instability, where things technically stay online but feel broken to users. TCP-heavy pressure: Make sure your edge and backends can absorb a surge in connections without falling over—check load balancer limits, connection/state capacity, and confirm health checks won’t start flapping during traffic spikes. UDP burst patterns: Rely on automated detection and mitigation—these bursts are often over before a human can respond. Reduce exposure: Inventory any internet-facing UDP services and shut down, restrict, or isolate anything you don’t truly need. Attack duration: Attackers continued to favor short-lived bursts designed to outrun manual response, but we also saw a notable shift in “who” felt the impact most. High-sensitivity workloads, especially gaming, experienced some of the highest packet-per-second and bandwidth-driven spikes, often concentrated into bursts lasting from a few minutes to several minutes. Even when these events were brief, the combination of high PPS + high bandwidth can be enough to trigger jitter, session drops, match instability, or rapid scaling churn. Overall, 34% of attacks lasted 5 minutes or less, and 83% ended within 40 minutes, reinforcing the same lesson: modern DDoS patterns are optimized for speed and disruption, not longevity. For latency- and session-sensitive services, “only a few minutes” can still be a full outage experience. Attack duration is an attacker advantage when defenses rely on humans to notice, diagnose, and react. Design for minute-long spikes: assume attacks will be short, sharp, and high PPS such that your protections should engage automatically. Watch the right signals: alert on PPS spikes and service health (disconnect rates, latency/jitter), not bandwidth alone. Botnet-driven surges: Azure observed rapid rotation of botnet traffic associated with Aisuru and KimWolf targeting public-facing endpoints. The traffic was highly distributed across regions and networks. In several instances, when activity was mitigated in one region, similar traffic shifted to alternate regions or segments shortly afterward. “Relocation” behavior is the operational signature of automated botnet playbooks: probe → hit → shift → retry. If defenses vary by region or endpoint, attackers will find the weakest link quickly. Customers should standardize protection posture, ensure consistent DDoS policies and thresholds across regions. Monitor by setting the right alerts and notifications. The snapshot below captures the Source-side distribution at that moment, showing which industry verticals were used to generate the botnet traffic during the observation window The geography indicators below reflect where the traffic was observed egressing onto the internet, and do not imply attribution or intent by any provider or country. Preparing for 2026 As organizations transition into 2026, the lessons from the 2025 holiday season marked by persistent and evolving DDoS threats, including the rise of DDoS-for-hire services, massive botnets underscore the critical need for proactive, resilient cybersecurity. Azure's proven ability to automatically detect, mitigate, and withstand advanced attacks (such as record-breaking volumetric incidents) highlights the value of always-on protections to maintain business continuity and safeguard digital services during peak demand periods. Adopting a Zero Trust approach is essential in this landscape, as it operates on the principle of "never trust, always verify," assuming breaches are inevitable and requiring continuous validation of access and traffic principles that complement DDoS defenses by limiting lateral movement and exposure even under attack. To achieve comprehensive protection, implement layered security: deploy Azure DDoS Protection for network-layer (Layers 3 and 4) volumetric mitigation with always-on monitoring, adaptive tuning, telemetry, and alerting; combine it with Azure Web Application Firewall (WAF) to defend the application layer (Layer 7) against sophisticated techniques like HTTP floods; and integrate Azure Firewall for additional network perimeter controls. Key preparatory steps include identifying public-facing exposure points, establishing normal traffic baselines, conducting regular DDoS simulations, configuring alerts for active mitigations, forming a dedicated response team, and enabling expert support like the DDoS Rapid Response (DRR) team when needed. By prioritizing these multi-layered defenses and a well-practiced response plan, organizations can significantly enhance resilience against the evolving DDoS landscape in 2026.A Practical Guide to Azure DDoS Protection Cost Optimization
Introduction Azure provides infrastructure-level DDoS protection by default to protect Azure’s own platform and services. However, this protection does not extend to customer workloads or non-Microsoft managed resources like Application Gateway, Azure Firewall, or virtual machines with public IPs. To protect these resources, Azure offers enhanced DDoS protection capabilities (Network Protection and IP Protection) that customers can apply based on workload exposure and business requirements. As environments scale, it’s important to ensure these capabilities are applied deliberately and aligned with actual risk. For more details on how Azure DDoS protection works, see Understanding Azure DDoS Protection: A Closer Look. Why Cost Optimization Matters Cost inefficiencies related to Azure DDoS Protection typically emerge as environments scale: New public IPs are introduced Virtual networks evolve Workloads change ownership Protection scope grows without clear alignment to workload exposure The goal here is deliberate, consistent application of enhanced protection matched to real risk rather than historical defaults. Scoping Enhanced Protection Customer workloads with public IPs require enhanced DDoS protection to be protected against targeted attacks. Enhanced DDoS protection provides: Advanced mitigation capabilities Detailed telemetry and attack insights Mitigation tuned to specific traffic patterns Dedicated support for customer workloads When to apply enhanced protection: Workload Type Enhanced Protection Recommended? Internet-facing production apps with direct customer impact Yes Business-critical systems with compliance requirements Yes Internal-only workloads behind private endpoints Typically not needed Development/test environments Evaluate based on exposure Best Practice: Regularly review public IP exposure and workload criticality to ensure enhanced protection aligns with current needs. Understanding Azure DDoS Protection SKUs Azure offers two ways to apply enhanced DDoS protection: DDoS Network Protection and DDoS IP Protection. Both provide DDoS protection for customer workloads. Comparison Table Feature DDoS Network Protection DDoS IP Protection Scope Virtual network level Individual public IP Pricing model Fixed base + overage per IP Per protected IP Included IPs 100 public IPs N/A DDoS Rapid Response (DRR) Included Not available Cost protection guarantee Included Not available WAF discount Included Not available Best for Production environments with many public IPs Selective protection for specific endpoints Management Centralized Granular Cost efficiency Lower per-IP cost at scale (100+ IPs) Lower total cost for few IPs (< 15) DDoS Network Protection DDoS Network Protection can be applied in two ways: VNet-level protection: Associate a DDoS Protection Plan with virtual networks, and all public IPs within those VNets receive enhanced protection Selective IP linking: Link specific public IPs directly to a DDoS Protection Plan without enabling protection for the entire VNet This flexibility allows you to protect entire production VNets while also selectively adding individual IPs from other environments to the same plan. For more details on selective IP linking, see Optimizing DDoS Protection Costs: Adding IPs to Existing DDoS Protection Plans. Ideal for: - Production environments with multiple internet-facing workloads - Mixed environments where some VNets need full coverage and others need selective protection - Scenarios requiring centralized visibility, management, and access to DRR, cost protection, and WAF discounts DDoS IP Protection DDoS IP Protection allows enhanced protection to be applied directly to individual public IPs, with per-IP billing. This is a standalone option that does not require a DDoS Protection Plan. Ideal for: Environments with fewer than 15 IPs requiring protection Cases where DRR, cost protection, and WAF discounts are not needed Quick enablement without creating a protection plan Decision Tree: Choosing the Right SKU Now that you know the main scenarios, the decision tree below can help you determine which SKU best fits your environment based on feature requirements and scale: Network Protection exclusive features: DDoS Rapid Response (DRR): Access to Microsoft DDoS experts during active attacks Cost protection: Resource credits for scale-out costs incurred during attacks WAF discount: Reduced pricing on Azure Web Application Firewall Consolidating Protection Plans at Tenant Level A single DDoS Protection Plan can protect multiple virtual networks and subscriptions within a tenant. Each plan includes: Fixed monthly base cost 100 public IPs included Overage charges for additional IPs beyond the included threshold Cost Comparison Example Consider a customer with 130 public IPs requiring enhanced protection: Configuration Plans Base Cost Overage Total Monthly Cost Two separate plans 2 $2,944 × 2 = $5,888 $0 ~$5,888 Single consolidated plan 1 $2,944 30 IPs × $30 = $900 ~$3,844 Savings: ~$2,044/month ($24,528/year) by consolidating to a single plan. In both cases, the same public IPs receive the same enhanced protection. The cost difference is driven entirely by plan architecture. How to Consolidate Plans Use the PowerShell script below to list existing DDoS Protection Plans and associate virtual networks with a consolidated plan. Run this script from Azure Cloud Shell or a local PowerShell session with the [Az module](https://learn.microsoft.com/powershell/azure/install-azure-powershell) installed. The account running the script must have Network Contributor role (or equivalent) on the virtual networks being modified and Reader access to the DDoS Protection Plan. # List all DDoS Protection Plans in your tenant Get-AzDdosProtectionPlan | Select-Object Name, ResourceGroupName, Id # Associate a virtual network with an existing DDoS Protection Plan $ddosPlan = Get-AzDdosProtectionPlan -Name "ConsolidatedDDoSPlan" -ResourceGroupName "rg-security" $vnet = Get-AzVirtualNetwork -Name "vnet-production" -ResourceGroupName "rg-workloads" $vnet.DdosProtectionPlan = New-Object Microsoft.Azure.Commands.Network.Models.PSResourceId $vnet.DdosProtectionPlan.Id = $ddosPlan.Id $vnet.EnableDdosProtection = $true Set-AzVirtualNetwork -VirtualNetwork $vnet Preventing Protection Drift Protection drift occurs when the resources covered by DDoS protection no longer align with the resources that actually need it. This mismatch can result in wasted spend (protecting resources that are no longer critical) or security gaps (missing protection on newly deployed resources). Common causes include: Applications are retired but protection remains Test environments persist longer than expected Ownership changes without updating protection configuration Quarterly Review Checklist List all public IPs with enhanced protection enabled Verify each protected IP maps to an active, production workload Confirm workload criticality justifies enhanced protection Review ownership tags and update as needed Remove protection from decommissioned or non-critical resources Validate DDoS Protection Plan consolidation opportunities Sample Query: List Protected Public IPs Use the following PowerShell script to identify all public IPs currently receiving DDoS protection in your environment. This helps you audit which resources are protected and spot candidates for removal. Run this from Azure Cloud Shell or a local PowerShell session with the Az module installed. The account must have Reader access to the subscriptions being queried. # List all public IPs with DDoS protection enabled Get-AzPublicIpAddress | Where-Object { $_.DdosSettings.ProtectionMode -eq "Enabled" -or ($_.IpConfiguration -and (Get-AzVirtualNetwork | Where-Object { $_.EnableDdosProtection -eq $true }).Subnets.IpConfigurations.Id -contains $_.IpConfiguration.Id) } | Select-Object Name, ResourceGroupName, IpAddress, @{N='Tags';E={$_.Tag | ConvertTo-Json -Compress}} For a comprehensive assessment of all public IPs and their DDoS protection status across your environment, use the DDoS Protection Assessment Tool. Making Enhanced Protection Costs Observable Ongoing visibility into DDoS Protection costs enables proactive optimization rather than reactive bill shock. When costs are surfaced early, you can spot scope creep before it impacts your budget, attribute spending to specific workloads, and measure whether your optimization efforts are paying off. The following sections cover three key capabilities: budget alerts to notify you when spending exceeds thresholds, Azure Resource Graph queries to analyze protection coverage, and tagging strategies to attribute costs by workload. Setting Up Cost Alerts Navigate to Azure Cost Management + Billing Select Cost alerts > Add Configure: o Scope: Subscription or resource group o Budget amount: Based on expected DDoS Protection spend o Alert threshold: 80%, 100%, 120% o Action group: Email security and finance teams Tagging Strategy for Cost Attribution Apply consistent tags to track DDoS protection costs by workload: # Tag public IPs for cost attribution $pip = Get-AzPublicIpAddress -Name "pip-webapp" -ResourceGroupName "rg-production" $tags = @{ "CostCenter" = "IT-Security" "Workload" = "CustomerPortal" "Environment" = "Production" "DDoSProtectionTier" = "NetworkProtection" } Set-AzPublicIpAddress -PublicIpAddress $pip -Tag $tags Summary This guide covered how to consolidate DDoS Protection Plans to avoid paying multiple base costs, select the appropriate SKU based on IP count and feature needs, apply protection selectively with IP linking, and prevent configuration drift through regular reviews. These practices help ensure you're paying only for the protection your workloads actually need. References Review Azure DDoS Protection pricing Enable DDoS Network Protection for a virtual network Configure DDoS IP Protection Configure Cost Management alerts
Zero Trust with Azure Firewall, Azure DDoS Protection and Azure WAF: A practical use case
Introduction Zero Trust has emerged as the defining security ethos of the modern enterprise. It is guided by a simple but powerful principle: “Never trust, always verify.” This principle is more relevant now than ever as cyberattacks continue to trend upward in both frequency and impact, affecting organizations of every size and industry. No entity large or small can assume immunity. As a result, adopting Zero Trust is no longer optional, it is a foundational requirement for designing secure, resilient architectures. A key tenet of Zero Trust is the assumption of breach, thus designing systems with the expectation that threats may already exist both outside and inside the network perimeter. To implement this principle, you need multiple, independent security controls that inspect traffic at different layers and enforce least privilege access continuously. Relying on a single security control, even a highly capable one, leaves gaps that modern attackers are adept at exploiting. It is within this context that combining the use of Azure Firewall, Azure DDoS Protection and Azure Web Application Firewall (WAF) services to secure Web Applications while protecting the network perimeter becomes important. Together, these services deliver comprehensive protection across the network and application layers. Defense-in-depth: Why Azure WAF, Azure DDoS Protection and Azure Firewall are essential for Zero Trust In these sections ahead, we examine the common network and application-layer attack vectors that target modern web applications and illustrate how Azure WAF, Azure DDoS protection, and Azure Firewall, when layered strategically, work in tandem to mitigate these threats. The architecture The test environment was designed to reflect a common Azure deployment pattern: Azure DDoS Protection at the edge, to defend against a comprehensive set of network layer (layer 3/4) attacks Azure Application Gateway with WAF, inspecting inbound HTTP traffic for application-layer threats Azure Firewall Premium behind the gateway, providing network-layer protection, deep packet inspection, and outbound traffic governance. A backend subnet hosting an intentionally vulnerable application (OWASP Juice Shop) to simulate real-world attack scenarios. Traffic flows through the DDoS first, then WAF, and then the firewall, before reaching the backend. Outbound traffic from the backend is routed through the firewall for inspection. This ensures that all inbound and outbound traffic is scrutinized. Two access paths that will be tested: Via the Application Gateway public IP, where traffic passes through DDoS, WAF and Firewall. Via the Firewall public IP using a DNAT rule, where traffic bypasses WAF and is inspected only by the Firewall. The following scenarios illustrate how this complementary protection strengthens overall resilience: Scenario 1: SQL injection (application-layer attack) Let’s say an attacker on the internet attempts to access the application’s login endpoint via the Application Gateway IP address and injects a SQL payload into the input field. For example, the attacker submits a request containing the following payload in the User ID field: ?id=' OR 1=1 -- Azure WAF will receive the request, analyze, and if Azure WAF is deployed in Prevention mode, it will immediately detect the SQL injection attempt using its built-in Managed Ruleset. Upon detection, Azure WAF will return a WAF block page, preventing the request from ever reaching the application. By contrast, when the same application is accessed through a firewall-only path (for example, via a DNAT rule on Azure Firewall that exposes the application on port 443), Azure Firewall allows the traffic as it does not perform deep Application layer inspection and SQL injection payloads when embedded within the HTTP request body, appear legitimate at the network layer. Here is a snapshot of the attacker gaining access to the admin role when they insert this SQL injection attack without Azure WAF and only Azure Firewall in the path. Scenario 2: Volumetric and application-layer DDoS attacks Next, the attacker launches a volumetric network layer DDoS (SYN/UDP floods) to saturate bandwidth, but Azure DDoS Network Protection absorbs and scrubs the attack at the edge, so no traffic reaches Application Gateway, WAF, or Firewall. When the network layer attack fails, they shift to HTTP flood attack at the application layer, overwhelming the web application with a high volume of requests. Some requests include exploit attempts, while others are designed purely to exhaust application resources. Azure WAF here, can identify malicious patterns such as: Automated bots lacking proper headers Abnormal request rates Known exploit payloads embedded within requests Malicious IP addresses Note: Azure DDoS Protection is a comprehensive service that provides protection across network layers (Layer 3 and 4), while HTTP DDoS Protection specifically targets application-layer attacks (Layer 7) and is integrated with Azure WAF. They are complementary services designed to defend against different types of threats within the Azure environment. Additionally, if the botnet’s IPs are known threat actors or malicious traffic, Azure Firewall’s threat intelligence and IDPS will be able to flag this traffic too. Together, these services form a complementary, defense-in-depth strategy for protecting Azure workloads against distributed denial-of-service attacks. Scenario 3: Path Traversal Attempt/Information leak: (Application-Layer Attack) Next, the attacker sends HTTP requests to access sensitive system files such as /etc/passwd by sending crafted HTTP requests to the application via the Application Gateway public IP address. The request successfully passes through Azure Application Gateway WAF, as it does not trigger a managed rule violation in this case. However, when the request reaches Azure Firewall, the Firewall’s IDPS detects the malicious pattern in the HTTP header and blocks the connection before it can reach the backend workload. Because the backend connection is denied by Azure Firewall, Application Gateway is unable to establish a successful response and returns a 504 Gateway Timeout to the client, rather than a 403 Forbidden response that would typically be generated by WAF when it blocks traffic. Below is the log from Azure Firewall showing that its able to detect this traffic as – Attempted Information Leak. As seen below, the traffic passed Application Gateway+WAF but was caught by Azure Firewall: This scenario highlights an important architectural outcome: The combination of WAF and Azure Firewall provides layered enforcement, even if an attack manages to slip past Azure WAF, Azure Firewall adds an additional enforcement layer to ensure the application remains protected. Now, let’s look at some more Network Layer attacks: Scenario 4: Network reconnaissance and breach In this scenario, port 3389 is exposed on Application Gateway using the L4 TCP Proxy option. Now, the attacker attempts to scan the Application Gateway on all the ports/protocols and found that port 3389 was open along with other ports such as ports 80, 8080, 3000. Azure WAF will alert us for Layer 7/Application exploit but cannot verify/validate the attack on port 3389 since it was purely Layer 3/4 and contained no HTTP payload for WAF inspection. The L4 proxy listener on App Gateway simply forwards the raw TCP connections to the Azure Firewall behind it. Azure Firewall, however, performs full network‑layer inspection across all ports and protocols, allowing it to detect and alert on this type of L3/L4 reconnaissance even when App Gateway had the port open via the TCP proxy feature. As seen below the traffic passed Application Gateway+WAF but was caught by Azure Firewall since it is non-HTTP: The attacker then tries a different approach: Now the attacker somehow compromises a workstation inside our network and attempts to move laterally to the web server via RDP on port 3389 and/or attempts to exfiltrate and try to access something outside of the network. Azure Firewall located inside the VNet blocks the RDP attempt (if there is no rule allowing it) and if there is, its IDPS flags/blocks the traffic as suspicious. In this case, Azure WAF will not be involved but Azure Firewall inspects this internal and/or outbound traffic and blocks it. This illustrates how a combination of the two stops the attacker at multiple points: firewall foiled the reconnaissance and lateral movement/exfiltration, WAF foiled the application exploit. We can see below the outbound malicious attempt caught by Azure Firewall IDPS: In summary, Azure WAF is like the “bodyguard at the application’s front door” – inspecting every HTTP request in detail and ejecting those carrying hidden weapons or exhibiting bad behavior. It focuses on the web layer, which Azure Firewall or DDoS alone cannot fully protect. If we only had the WAF and no network firewall or DDoS, we’d be safe from many web attacks but would remain exposed to network-level threats (e.g., someone trying to RDP into a VM, or flooding a non-HTTP service). Conversely, if we had only the firewall, a crafty attacker could still exploit a vulnerability in our web app with a well-crafted HTTP request that looks “allowed” to the firewall – that’s where the WAF comes in to catch it. Azure Firewall on the other hand, acts as the “moat and drawbridge” to your cloud network: it keeps out the obvious bad guys at the gate, tightly limits what’s allowed in or out (no implicit trust for internal IPs), and uses threat intel + signatures to sniff out known threats in any traffic it passes, even outbound traffic. The table below shows the traffic flow that will be filtered by Azure WAF vs Azure Firewall. As you can see, layered security is fundamental to Zero Trust Conclusion In a Zero Trust architecture, security cannot rely on implicit trust or a single layer of defense. The combination of Azure Firewall Premium, Azure DDoS protection and Azure Application Gateway WAF exemplifies defense-in-depth by protecting both network and application layers. Organizations hosting internet-facing applications should adopt this layered strategy to reduce exposure to modern threats, prevent lateral movement, and maintain strict control over outbound traffic. By implementing these services together, you align with Microsoft’s recommended best practices for Zero Trust and significantly strengthen your cloud security posture. References: Implement a Zero Trust network for web applications by using Azure Firewall and Azure Application Gateway What is Azure Web Application Firewall? Azure DDoS Protection Overview | Microsoft Learn What is Azure Firewall? Architecture designs using Azure WAF and Azure Firewall together Zero Trust Assessment Overview | Microsoft LearnApplication layer DDoS protection using the HTTP DDoS Ruleset in Azure WAF
Today, Distributed Denial of Service (DDoS) attacks can strike as soon as public connectivity is enabled, highlighting their widespread prevalence. Factors such as easily accessible botnets, the explosion of IoT devices, and the growth of API-driven workloads, e-commerce platforms, and global web applications have made these attacks easier to launch and more impactful. Importantly, attackers are no longer focusing solely on the network layer, they increasingly target the application layer. Application-layer DDoS attacks often mimic normal user activity, making detection and mitigation far more challenging than traditional network-layer attacks. The most common types of Application layer/HTTP based DDOS attacks are outlined below. Common HTTP-based DDoS attacks: HTTP floods: Large volumes of valid looking GET or POST requests are sent to webpages or APIs, overwhelming application gateways and backend services without saturating network bandwidth. API abuse attacks: Attackers repeatedly call specific API endpoints, such as authentication, search, or checkout that trigger expensive backend operations, quickly exhausting compute and database resources. Slow HTTP attacks: Connections are deliberately kept open by sending data very slowly, consuming server threads and connection limits while generating relatively little traffic. TLS-intensive attacks: A high number of encrypted connections are initiated to increase CPU usage during TLS handshakes, impacting application gateways and load balancers. In order to defend against these sophisticated threats, organizations need application-aware protection that can identify abnormal behavior patterns rather than relying only on traffic volume. This is precisely the capability provided by the HTTP DDoS Ruleset for Azure Application Gateway WAF. What Is the HTTP DDoS Ruleset? The HTTP DDoS Ruleset is a built-in capability of Azure Application Gateway WAF designed to protect your applications from large-scale HTTP floods at the application layer. Unlike static rate-limiting or manual IP blocking, this ruleset uses adaptive learning to understand what “normal” traffic looks like for your gateway and then automatically mitigates anomalies. Key features Baseline learning: The ruleset observes traffic for about 24 hours to establish a normal request pattern per gateway. Dynamic detection: When incoming requests exceed the learned baseline, the ruleset identifies potential abuse (Client-specific or IP specific limits are applied only when the overall request volume to the gateway exceeds its learned baseline). Automated mitigation: Offending clients are blocked and are placed in a “penalty box” for the defined time (15 minutes). Sensitivity levels: Choose low, medium, or high to control aggressiveness. Medium is recommended for most workloads. Leverages Microsoft’s vast global network’s threat intelligence to establish a stricter baseline for suspected botnet traffic and when exceeded, blocks them and places those suspected bots into the penalty box. Threat intelligence plays a critical role here. By continuously aggregating data from global telemetry, threat intelligence systems can identify sources that are likely participating in coordinated attacks. When applied to HTTP DDoS protection, this intelligence allows suspected bot traffic to be treated differently from normal user traffic. Instead of relying only on static blocklists, botnet-aware defenses use reputation, behavior, and historical signals to apply throttling or penalties dynamically. This approach reduces the attack surface, limits the impact of distributed bot-driven floods, and avoids unnecessary disruption to legitimate users. Threat intelligence shifts DDoS defense from a purely reactive posture to a more informed, proactive one, making it far more effective against today’s botnet-driven application-layer attacks. Enabling and validating the HTTP DDoS Ruleset: Getting started with the HTTP DDoS Ruleset on Application Gateway WAF is simple. Enable the Ruleset: In the Azure portal, open your WAF policy. Note: Currently the ruleset is available only in the preview portal: https://preview.portal.azure.com/ Under Managed Rules, Click on Assign and then assign the HTTP DDoS Ruleset_1.0 (Preview) and save. Each rule can be configured to either Log traffic for observation or Deny traffic for active mitigation. Sensitivity can be adjusted to High, Medium, or Low, allowing you to balance detection speed and accuracy. Higher sensitivity enforces lower thresholds and detects anomalies sooner, while lower sensitivity raises thresholds to reduce false positives. Medium sensitivity is the default and recommended setting for most workloads. Once enabled, the ruleset is evaluated early in the WAF pipeline, before custom rules are processed. This ensures that HTTP-based DDoS protection cannot be bypassed by DDoS protection. The ruleset works alongside the Default Rule Set (DRS) and any custom rules for comprehensive security. After the policy is applied to an Application Gateway, the ruleset enters a learning phase that lasts at least 24 hours. During this time, it observes traffic patterns to establish normal baselines for the gateway. No detection or blocking occurs during this period, allowing the ruleset to understand typical application behavior before enforcement begins. Metrics: Once the learning phase completes, traffic surges that exceed the learned baseline are reflected in the Application Gateway metrics. These metrics provide immediate visibility into when the HTTP DDoS ruleset is actively detecting and mitigating abnormal behavior. Metric – WAF Penalty Box Size This metric shows how many IP addresses are currently inside the penalty box, meaning that the WAF has detected them exceeding the learned HTTP DDoS baseline and is temporarily blocking them. A spike here indicates that multiple clients crossed their thresholds at the same time, often during an attack or load-test scenario. Metric – WAF Penalty Box Hits This metric represents how many IPs entered the penalty box. Every time a client breaches its threshold, the ruleset logs a hit and places that IP into the penalty box for approximately 15 minutes. Multiple hits often correlate with repeated spikes or sustained abusive traffic patterns. Logs: For deeper analysis, enabling diagnostic settings allows you to inspect HTTP DDoS Ruleset events directly in the logs. These logs provide granular details about which IPs were flagged, why they were flagged, and how far they exceeded expected thresholds. Example of DetailedData from a log: RemoteAddress: 4.x.x.x (Public IP) crossed threshold. Expected: 4400.000000 request per 900 seconds, Actual: 8407.000000 requests per 900 seconds. KQL queries to retrieve these logs: Resource specific logs: AGWFirewallLogs | where RuleSetType == "Microsoft_HTTPDDoSRuleSet" Diagnostic logs: AzureDiagnostics | where Category == "ApplicationGatewayFirewallLog" | where ruleSetType_s == "Microsoft_HTTPDDoSRuleSet" Note: Identify IPs repeatedly flagged and confirm they’re malicious, not legitimate clients. Conclusion: The threat landscape continues to evolve, and defenses must evolve with it. Leveraging the HTTP DDoS Ruleset in Azure Application Gateway WAF helps ensure protections keep pace with modern application-layer attacks. With built-in visibility through metrics and logs, teams can better understand traffic behavior and operate their WAF with greater confidence. Next Steps: Access the HTTP DDoS ruleset for Application Gateway via the preview portal: https://preview.portal.azure.com/ HTTP DDoS Ruleset (Preview) - Application Gateway WAF | Microsoft Learn Azure Web Application Firewall (WAF) policy overview | Microsoft LearnHow Azure network security can help you meet NIS2 compliance
With the adoption of the NIS2 Directive EU 2022 2555, cybersecurity obligations for both public and private sector organizations have become more strict and far reaching. NIS2 aims to establish a higher common level of cybersecurity across the European Union by enforcing stronger requirements on risk management, incident reporting, supply chain protection, and governance. If your organization runs on Microsoft Azure, you already have powerful services to support your NIS2 journey. In particular Azure network security products such as Azure Firewall, Azure Web Application Firewall WAF, and Azure DDoS Protection provide foundational controls. The key is to configure and operate them in a way that aligns with the directive’s expectations. Important note This article is a technical guide based on the NIS2 Directive EU 2022 2555 and Microsoft product documentation. It is not legal advice. For formal interpretations, consult your legal or regulatory experts. What is NIS2? NIS2 replaces the original NIS Directive 2016 and entered into force on 16 January 2023. Member states must transpose it into national law by 17 October 2024. Its goals are to: Expand the scope of covered entities essential and important entities Harmonize cybersecurity standards across member states Introduce stricter supervisory and enforcement measures Strengthen supply chain security and reporting obligations Key provisions include: Article 20 management responsibility and governance Article 21 cybersecurity risk management measures Article 23 incident notification obligations These articles require organizations to implement technical, operational, and organizational measures to manage risks, respond to incidents, and ensure leadership accountability. Where Azure network security fits The table below maps common NIS2 focus areas to Azure network security capabilities and how they support compliance outcomes. NIS2 focus area Azure services and capabilities How this supports compliance Incident handling and detection Azure Firewall Premium IDPS and TLS inspection, Threat Intelligence mode, Azure WAF managed rule sets and custom rules, Azure DDoS Protection, Azure Bastion diagnostic logs Detect, block, and log threats across layers three to seven. Provide telemetry for triage and enable response workflows that are auditable. Business continuity and resilience Azure Firewall availability zones and autoscale, Azure Front Door or Application Gateway WAF with zone redundant deployments, Azure Monitor with Log Analytics, Traffic Manager or Front Door for failover Improve service availability and provide data for resilience reviews and disaster recovery scenarios. Access control and segmentation Azure Firewall policy with DNAT, network, and application rules, NSGs and ASGs, Azure Bastion for browser based RDP SSH without public IPs, Private Link Enforce segmentation and isolation of critical assets. Support Zero Trust and least privilege for inbound and egress. Vulnerability and misconfiguration defense Azure WAF Microsoft managed rule set based on OWASP CRS. Azure Firewall Premium IDPS signatures Reduce exposure to common web exploits and misconfigurations for public facing apps and APIs. Encryption and secure communications TLS policy: Application Gateway SSL policy; Front Door TLS policy; App Service/PaaS minimum TLS. Inspection: Azure Firewall Premium TLS inspection Inspect and enforce encrypted communication policies and block traffic that violates TLS requirements. Inspect decrypted traffic for threats. Incident reporting and evidence Azure Network Security diagnostics, Log Analytics, Microsoft Sentinel incidents, workbooks, and playbooks Capture and retain telemetry. Correlate events, create incident timelines, and export reports to meet regulator timelines. NIS2 articles in practice Article 21 cybersecurity risk management measures Azure network controls contribute to several required measures: Prevention and detection. Azure Firewall blocks unauthorized access and inspects traffic with IDPS. Azure DDoS Protection mitigates volumetric and protocol attacks. Azure WAF prevents common web exploits based on OWASP guidance. Logging and monitoring. Azure Firewall, WAF, DDoS, and Bastion resources produce detailed resource logs and metrics in Azure Monitor. Ingest these into Microsoft Sentinel for correlation, analytics rules, and automation. Control of encrypted communications. Azure Firewall Premium provides TLS inspection to reveal malicious payloads inside encrypted sessions. Supply chain and service provider management. Use Azure Policy and Defender for Cloud to continuously assess configuration and require approved network security baselines across subscriptions and landing zones. Article 23 incident notification Build an evidence friendly workflow with Sentinel: Early warning within twenty four hours. Use Sentinel analytics rules on Firewall, WAF, DDoS, and Bastion logs to generate incidents and trigger playbooks that assemble an initial advisory. Incident notification within seventy two hours. Enrich the incident with additional context such as mitigation actions from DDoS, Firewall and WAF. Final report within one month. Produce a summary that includes root cause, impact, and corrective actions. Use Workbooks to export charts and tables that back up your narrative. Article 20 governance and accountability Management accountability. Track policy compliance with Azure Policy initiatives for Firewall, DDoS and WAF. Use exemptions rarely and record justification. Centralized visibility. Defender for Cloud’s network security posture views and recommendations give executives and owners a quick view of exposure and misconfigurations. Change control and drift prevention. Manage Firewall, WAF, and DDoS through Network Security Hub and Infrastructure as Code with Bicep or Terraform. Require pull requests and approvals to enforce four eyes on changes. Network security baseline Use this blueprint as a starting point. Adapt to your landing zone architecture and regulator guidance. Topology and control plane Hub and spoke architecture with a centralized Azure Firewall Premium in the hub. Enable availability zones. Deploy Azure Bastion Premium in the hub or a dedicated management VNet; peer to spokes. Remove public IPs from management NICs and disable public RDP SSH on VMs. Use Network Security Hub for at-scale management. Require Infrastructure as Code for all network security resources. Web application protection Protect public apps with Azure Front Door Premium WAF where edge inspection is required. Use Application Gateway WAF v2 for regional scenarios. Enable the Microsoft managed rule set and the latest version. Add custom rules for geo based allow or deny and bot management. enable rate limiting when appropriate. DDoS strategy Enable DDoS Network Protection on virtual networks that contain internet facing resources. Use IP Protection for single public IP scenarios. Configure DDoS diagnostics and alerts. Stream to Sentinel. Define runbooks for escalation and service team engagement. Firewall policy Enable IDPS in alert and then in alert and deny for high confidence signatures. Enable TLS inspection for outbound and inbound where supported. Enforce FQDN and URL filtering for egress. Require explicit allow lists for critical segments. Deny inbound RDP SSH from the internet. Allow management traffic only from Bastion subnets or approved management jump segments. Logging, retention, and access Turn on diagnostic settings for Firewall, WAF, DDoS, and Application Gateway or Front Door. Send to Log Analytics and an archive storage account for long term retention. Set retention per national law and internal policy. Azure Monitor Log Analytics supports table-level retention and archive for up to 12 years, many teams keep a shorter interactive window and multi-year archive for audits. Restrict access with Azure RBAC and Customer Managed Keys where applicable. Automation and playbooks Build Sentinel playbooks for regulator notifications, ticket creation, and evidence collection. Maintain dry run versions for exercises. Add analytics for Bastion session starts to sensitive VMs, excessive failed connection attempts, and out of hours access. Conclusion Azure network security services provide the technical controls most organizations need in order to align with NIS2. When combined with policy enforcement, centralized logging, and automated detection and response, they create a defensible and auditable posture. Focus on layered protection, secure connectivity, and real time response so that you can reduce exposure to evolving threats, accelerate incident response, and meet NIS2 obligations with confidence. References NIS2 primary source Directive (EU) 2022/2555 (NIS2). https://eur-lex.europa.eu/eli/dir/2022/2555/oj/eng Azure Firewall Premium features (TLS inspection, IDPS, URL filtering). https://learn.microsoft.com/en-us/azure/firewall/premium-features Deploy & configure Azure Firewall Premium. https://learn.microsoft.com/en-us/azure/firewall/premium-deploy IDPS signature categories reference. https://learn.microsoft.com/en-us/azure/firewall/idps-signature-categories Monitoring & diagnostic logs reference. https://learn.microsoft.com/en-us/azure/firewall/monitor-firewall-reference Web Application Firewall WAF on Azure Front Door overview & features. https://learn.microsoft.com/en-us/azure/frontdoor/web-application-firewall WAF on Application Gateway overview. https://learn.microsoft.com/en-us/azure/web-application-firewall/overview Examine WAF logs with Log Analytics. https://learn.microsoft.com/en-us/azure/application-gateway/log-analytics Rate limiting with Front Door WAF. https://learn.microsoft.com/en-us/azure/web-application-firewall/afds/waf-front-door-rate-limit Azure DDoS Protection Service overview & SKUs (Network Protection, IP Protection). https://learn.microsoft.com/en-us/azure/ddos-protection/ddos-protection-overview Quickstart: Enable DDoS IP Protection. https://learn.microsoft.com/en-us/azure/ddos-protection/manage-ddos-ip-protection-portal View DDoS diagnostic logs (Notifications, Mitigation Reports/Flows). https://learn.microsoft.com/en-us/azure/ddos-protection/ddos-view-diagnostic-logs Azure Bastion Azure Bastion overview and SKUs. https://learn.microsoft.com/en-us/azure/bastion/bastion-overview Deploy and configure Azure Bastion. https://learn.microsoft.com/en-us/azure/bastion/tutorial-create-host-portal Disable public RDP and SSH on Azure VMs. https://learn.microsoft.com/en-us/azure/virtual-machines/security-baseline Azure Bastion diagnostic logs and metrics. https://learn.microsoft.com/en-us/azure/bastion/bastion-diagnostic-logs Microsoft Sentinel Sentinel documentation (onboard, analytics, automation). https://learn.microsoft.com/en-us/azure/sentinel/ Azure Firewall solution for Microsoft Sentinel. https://learn.microsoft.com/en-us/azure/firewall/firewall-sentinel-overview Use Microsoft Sentinel with Azure WAF. https://learn.microsoft.com/en-us/azure/web-application-firewall/waf-sentinel Architecture & routing Hub‑spoke network topology (reference). https://learn.microsoft.com/en-us/azure/architecture/networking/architecture/hub-spoke Azure Firewall Manager & secured virtual hub. https://learn.microsoft.com/en-us/azure/firewall-manager/secured-virtual-hubAzure DDoS Protection now supports QUIC protocol — Securing the future of HTTP/3 traffic
The internet’s transport layer is undergoing one of its most significant evolutions in decades. QUIC (Quick UDP Internet Connections) — the protocol underpinning HTTP/3 — is rapidly becoming the default for high performance, secure communication on the web. From YouTube streaming to WhatsApp messaging, QUIC is already powering billions of connections daily. Recognizing both its potential and its unique security challenges, Microsoft has now integrated full QUIC mitigation capabilities into Azure DDoS Protection. This protection is enabled by default — no configuration required — ensuring that customers adopting HTTP/3 can do so with confidence. What is QUIC and why it matters QUIC was originally developed by Google and standardized by the IETF in 2021 (RFC 9000). Unlike traditional HTTP/2 over TCP, QUIC runs over UDP port 443, combining transport and security layers into a single handshake. This allows a secure, encrypted connection to be established in just one round trip — or even zero round trips for repeat connections. Technical advantages of QUIC include: Integrated TLS 1.3 — Encryption is built into the protocol, eliminating the need for separate TLS negotiation. Multiplexed streams without head of line blocking — Independent streams mean packet loss in one stream doesn’t stall others. Connection migration — QUIC connections survive IP address changes, ideal for mobile devices switching between Wi-Fi and cellular. Faster recovery from loss — QUIC uses packet numbers instead of TCP sequence numbers, improving loss detection and retransmission. These features make QUIC ideal for latency sensitive workloads such as video streaming, online gaming, and real-time collaboration tools. The DDoS challenge for QUIC: While QUIC’s design improves performance and security, its reliance on UDP introduces a distinct threat profile that goes beyond traditional UDP floods. QUIC’s handshake, encryption model, and connection identifiers create attack surfaces unique to the protocol. Key QUIC‑specific DDoS vectors include: Initial Packet Floods with Fake Handshakes Attackers send large volumes of QUIC Initial packets containing incomplete or malformed TLS Client Hello messages. This forces the server to allocate cryptographic resources for each bogus attempt, consuming CPU and memory. Connection ID Exhaustion QUIC uses Connection IDs to maintain state across IP changes. Attackers can rapidly cycle through random Connection IDs to bypass per‑IP rate limits. This can overwhelm connection tracking tables. Version Negotiation Abuse Attackers send unsupported or random QUIC version numbers to trigger repeated version negotiation responses from the server. This consumes bandwidth and processing without establishing a valid session. Malformed Frame Injection QUIC frames (STREAM, ACK, CRYPTO, etc.) can be deliberately malformed to trigger parsing errors or excessive error handling. Unlike generic UDP payloads, these require QUIC‑aware inspection to detect. Amplification via Retry Packets QUIC Retry packets can be abused in reflection attacks if the server responds with larger payloads than the request. Attackers spoof victim IPs to direct amplified traffic toward them. Why this is different from generic UDP floods: Generic UDP attacks typically rely on raw packet volume or reflection from open services. QUIC attacks exploit protocol‑level behaviors — handshake processing, version negotiation, and Connection ID handling — that require stateful, QUIC‑aware mitigation. Traditional UDP filtering cannot distinguish between a legitimate QUIC Initial packet and a crafted one designed to exhaust resources. Azure DDoS Protection — QUIC mitigation [built-in]: Azure DDoS Protection now supports QUIC mitigation by default. This enhancement applies to all customers automatically — no opt-in or no manual tuning is required. Technical capabilities include: Protocol Compliance Validation — Ensures QUIC packets conform to RFC specifications, including fixed bit checks, version enforcement, and valid Connection ID lengths. Initial Packet Verification — Validates that QUIC initial packets contain a proper TLS Client Hello with Server Name Indication (SNI), blocking spoofed or incomplete handshakes. Source & Destination Rate Limiting — Controls excessive connection attempts per 4tuple (source IP, destination IP, source port, destination port). Global Limit IDs (GLID) — Applies connection and packet rate limits globally across the mitigation platform. Retry Authentication — Issues a cryptographic cookie challenge to verify client authenticity before allowing session establishment. Packet Rate Limiting by Connection ID — Limits both long header (initial) and short header (post handshake) packet rates to prevent floods. Malformed Packet Filtering — Drops packets with unsupported frames, invalid versions, or missing headers. Version Pinning — Prevents downgrade attacks by enforcing negotiated QUIC versions. All existing Layer 4 protections for UDP traffic — such as flood detection, anomaly scoring, and adaptive thresholds — are fully applied to QUIC. Real-world impact: Without effective mitigation, QUIC based services are highly susceptible to a range of disruptive threats. UDP floods can quickly overwhelm servers, consume resources and render applications unresponsive. Amplification attacks, which exploit the stateless nature of UDP, can multiply inbound traffic by factors of ten to a hundred, creating massive spikes that cripple performance. Such attacks often lead to high packet loss, degraded user experiences, and service interruptions. They can also drive-up infrastructure costs significantly, as organizations are forced to handle large volumes of malicious traffic that consume bandwidth and processing power. With Azure DDoS Protection in place, these risks are proactively addressed. Intelligent rate limiting and packet filtering mechanisms stop floods before they impact service availability. Spoofed packet blocking prevents reflection attacks from ever reaching the application layer. The result is a consistently reliable, low latency connection for QUIC enabled applications, even under hostile network conditions. By scrubbing malicious traffic before it reaches customer workloads, Azure also helps reduce operational costs, ensuring that resources are spent serving legitimate users rather than absorbing attack traffic. Who benefits from QUIC DDoS mitigation: The benefits of QUIC aware DDoS protection extend across industries and use cases. Web applications and APIs built on HTTP/3 gain the performance advantages of QUIC without inheriting its security risks. Streaming platforms such as YouTube or Twitch can deliver high quality, uninterrupted video experiences to millions of viewers, even during attempted network disruptions. Messaging and VoIP services like WhatsApp, Discord, and Zoom maintain crystal clear communication and low latency, which are critical for user satisfaction. Online gaming platforms, where milliseconds matter, can preserve smooth gameplay and prevent lag spikes caused by malicious traffic. Financial services and real-time transaction systems also stand to benefit, as they can maintain secure, uninterrupted operations in environments where downtime or delays could have significant business and compliance implications. Looking ahead: Microsoft is committed to continuously strengthening QUIC protection within Azure DDoS Protection. Efforts are already underway to expand mitigation capabilities ensuring broader coverage across the global network and to detect and neutralize threats faster and with greater precision, adapting to the evolving tactics of attackers. Just as importantly, Microsoft is actively gathering feedback from customers and internal teams to refine mitigation strategies, ensuring that QUIC protection remains both robust and aligned with real world usage patterns. These ongoing enhancements will help customers confidently adopt and scale QUIC based services, knowing that their performance and security are safeguarded by default. Conclusion: QUIC is the future of fast, secure internet communication — and Azure DDoS Protection is ready for it. With always-on, default-enabled QUIC mitigation, Azure customers can confidently adopt HTTP/3 without worrying about the unique DDoS risks that come with UDP based protocols. Your applications stay fast. Your users stay connected. Your infrastructure stays protected.Introducing the new Network Security Hub in Azure
Background: Since its launch in 2020, Azure Firewall Manager has supported customers in securing their networks. But the role of network security has since evolved, from a foundational requirement to a strategic priority for organizations. Today, organizations must protect every endpoint, server, and workload, as attackers continually search for the weakest link. Over the years, we’ve heard consistent feedback about the importance of centralized management, easier service discovery, and streamlined monitoring across their network security tools. These capabilities can make the difference between a minor incident and a major breach. That’s why we’re excited to introduce a new, unified Network Security hub experience. This updated hub brings together Azure Firewall, Web Application Firewall, and DDoS Protection—enabling you to manage, configure, and monitor all your network security services in one place. While Azure Firewall Manager offered some of this functionality, the name didn’t reflect the broader scope of protection and control that customers need. With this new experience, Firewall Manager has expanded into the Network Security Hub, making it easier to discover, configure, and monitor the right security services with just a few clicks. The result: less time navigating, more time securing your environment. What you’ll notice: Streamlined navigation: Whether you search for Azure Firewall, Web Application Firewall, DDoS Protection, or Firewall Manager, you’ll now be directed to the new Network Security hub. This unified entry point presents all relevant services in context—helping you stay focused and quickly find what you need, without feeling overwhelmed. Overview of services: The hub’s landing page provides a high-level view of each recommended solution, including key use cases, documentation links, and pricing details—so you can make informed decisions faster. Common scenarios: Explore typical deployment architectures and step-by-step guidance for getting started, right from the overview page. Related services: We’ve consolidated overlapping or closely related services to reduce noise and make your options clearer. The result? Fewer, more meaningful choices that are easier to evaluate and implement. New insights: We've enhanced the security coverage interface to show how many of your key resources are protected by Azure Firewall, DDoS Protection, and Web Application Firewall. Additionally, our integration with Azure Advisor now provides tailored recommendations to help you strengthen your security posture, reduce costs, and optimize Azure Firewall performance. What this means for you: No changes to Firewall Manager pricing or support: This is a user experience update only for Firewall Manager. You can continue to deploy Firewall policies and create Hub Virtual Network or Secured Virtual Hub deployments —now within the streamlined Network Security hub experience. Aligned marketing and documentation: We’ve updated our marketing pages and documentation to reflect this new experience, making it easier to find the right guidance and stay aligned with the latest best practices. Faster decision-making: With a clearer, more intuitive layout, it’s easier to discover the right service and act with confidence. Better product experience: This update brings greater cohesion to the Azure Networking portfolio, helping you get started quickly and unlock more value from day one Before: The original landing page was primarily focused on setting up Firewall Policies and Secured Virtual Hub, offering a limited view of Azure’s broader network security capabilities. After: The updated landing page delivers a more comprehensive and intuitive experience, with clear guidance on how to get started with each product—alongside common deployment scenarios to help you configure and operationalize your network security stack with ease. Before: The previous monitoring and security coverage experience was cluttered and difficult to navigate, making it harder to get a quick sense of your environment’s protection status. After: The updated Security Coverage view is cleaner and more intuitive. We've streamlined the layout and added Azure Advisor integration, so you can now quickly assess protection status across key services and receive actionable recommendations in one place. The expansion of Firewall Manager into the Network Security hub is part of a greater strategic effort to simplify and enhance the Azure Networking portfolio, ensuring better alignment with customer needs and industry best practices. You can learn more about this initiative in this blog. This shift is designed to better align with customer needs and industry best practices—by emphasizing core services, consolidating related offerings, and phasing out legacy experiences. The result is a more cohesive, intuitive, and efficient product experience across Azure Networking. 📣 If you have any thoughts or suggestions about the user interface, feel free to drop them in the feedback form available in the Network Security hub on the Azure Portal. Documentation links: Azure Networking hub page: Azure networking documentation | Microsoft Learn Scenario Hub pages: Azure load balancing and content delivery | Microsoft Learn Azure network foundation documentation | Microsoft Learn Azure hybrid connectivity documentation | Microsoft Learn Azure network security documentation | Microsoft Learn Scenario Overview pages What is load balancing and content delivery? | Microsoft Learn Azure Network Foundation Services Overview | Microsoft Learn What is hybrid connectivity? | Microsoft Learn What is Azure network security? | Microsoft LearnAutomating Enriched DDoS Alerts Using Logic Apps
In today’s digital world, Distributed Denial of Service (DDoS) attacks have become one of the most common and disruptive threats facing online applications and services. These attacks aim to overwhelm a target, typically a website, API, or server, by flooding it with massive volumes of traffic, rendering it slow or completely inaccessible. Azure DDoS Protection is Microsoft's cloud-native defense that helps safeguard public-facing endpoints hosted in Azure. It works by continuously monitoring traffic patterns at the network layer (L3 and L4) and applying mitigation techniques in real time when suspicious or anomalous activity is detected. Azure DDoS Protection is tightly integrated with the Azure platform and provides always-on traffic scrubbing without requiring any manual intervention. While Azure mitigates these attacks in the background, understanding who is attacking, which resources are targeted, and how often these events occur is helpful. This is where Azure Logic Apps shines. Azure Logic Apps is a powerful platform to simplify the integration and automation of multiple services that help you run your business workflows. You can run your custom code or use no code at all to get your workflows running. When combined with Log Analytics & KQL queries, Logic Apps can help you extract critical insights from DDoS logs, including: Attack starts and end times Affected public IPs Top attacking IPs, countries, and ASNs Volume of traffic and packets dropped Attack patterns and frequency Application availability The result of the process is an email alert with details about the resource associated with the Public IP as detailed above. The owner of the resource is added as a recipient of the email, along with the security team who get alerted when the Attack occurs. Whether you're a security engineer, a product owner, or part of a cloud operations team, this solution can help you improve visibility and enhance coordination during DDoS incidents. Let’s dive into how this automation works. Here is the link to this template. Note: This template is an updated version of the same template discussed in this Blog- Enriching DDoS Protection Alerts with Logic Apps What this template contains: Log Search Alert rule Action Group Logic App Office 365 API Connector Azure Monitor Logs API Connector Parameters to Input when deploying: Security team's Email Address Company Domain (In the form of abc@domain.com) Workspace name (Name of the Log Analytics workspace being used) Prerequisites: A Public IP Address with DDoS Protection enabled either via IP Protection or Network Protection A Log Analytics Workspace to which the above Public IP Address should be sending Diagnostic logs, specifically all of the below categories: DDoS protection notifications Flow logs of DDoS mitigation decisions Reports of DDoS mitigations Note: The Log Analytics Workspace must reside in the same Resource Group as the one where this template is being deployed. 🔐Authentication Prerequisites: Azure Resource Graph The Logic App uses a Managed Identity to authenticate with Azure Resource Graph and query metadata about Azure resources Required Role: Logic App's Managed Identity will need Reader or higher access on the subscription (or resource group) that contains the Public IP address under DDoS protection Log Analytics Workspace To run Kusto queries and retrieve DDoS mitigation logs, the Logic App connects to Azure Log Analytics Workspace using the same Managed Identity Required Role: Logic App's Managed Identity will need Log Analytics Reader on the target workspace Office 365 (Email Notifications) API Connection For sending enriched alert emails, the Logic App uses an API connection to Office 365. This connection must be authorized to send emails on behalf of the configured account, specifically Mail.Send & User.Read permissions You must sign in and authorize this connection once during setup using the outlook credentials that you need it to use to send the emails If your tenant has admin consent policies, a Global Admin might need to approve use of the connectors (especially Office 365) for the Logic App Azure Monitor Logs API Connection This script queries Flow logs of DDoS mitigation decisions & Reports of DDoS mitigations To do this it needs AzureMonitorLogs API Connection and therefore, authorizing this is necessary for it to work as expected You must sign in and authorize this connection once during setup Firewall & Network Rules Ensure that: No IP restrictions block access from Logic App to the target services or public test URL in the HTTP step. You can find the outgoing IP Addresses here: Go to your Logic App Select Properties Look for the "Runtime outgoing IP addresses" section—these are your runtime IPs Now, let’s look at what each of the items in the Template does and their workings below in detail: Log Search Alert rule Monitors log data: It continuously scans the Azure Diagnostics logs, specifically targeting entries where the Category is DDoSProtectionNotifications and the type_s field indicates a Mitigation started event Runs on a schedule: The rule runs every 5 minutes and looks back at the last 30 minutes of logs. This ensures near-real-time detection of mitigation activity. (This can be modified as needed to increase the look back time if needed) Triggers on first sign of mitigation: If even one matching log entry is found (i.e., one mitigation event has started), the alert fires. This makes it extremely responsive Alerts through an Action Group: Once triggered, the rule calls a pre-defined Action Group, which will Invoke a webhook to notify a Logic App Why It’s Useful: While Azure DDoS Protection automatically mitigates volumetric and protocol attacks at the network edge, getting alerted when an event occurs requires user configuration. This is done by: Notifying your team the moment mitigation begins Adding observability, so you can correlate mitigation with service behavior or performance dips Action Group: Enrich-DDoSAlert — Connecting detection to automation When a DDoS attack is detected through an Azure Monitor alert, the response needs to be fast and efficient. That’s where Action Groups come in. In this case, the Enrich-DDoSAlert action group acts as the automation trigger for our DDoS response pipeline This action group is configured to call a webhook tied to an Azure Logic App using a secure HTTP POST request instantly when the alert fires. Then the Logic App carries out a series of enrichment and response steps based on the DDoS alert Why This Matters: The action group acts as a real-time bridge between detection and automation, triggering the Logic App instantly when an alert fires. The Action Group ensures that: The alert is captured Automation is triggered The investigation process starts without delay Logic App: Enrich-DDoSAlert Step-by-Step Breakdown Triggered via HTTP request Accepts a payload containing alert metadata such as: o Target resource ID o DDoS alert details o Search links and interval data Extracts impacted public IP and performs enrichment Using Azure Resource Graph, it queries the target IP to determine: o Associated Azure resource (VM, App Gateway, etc.) o DNS name, tags, region, resource group, and owner (from tags) Connectivity Check (Optional Validation) It performs an HTTP GET request to the DNS/IP of the attacked resource — checking if it’s still up or responding Generates an HTML-formatted email Using all this context, it builds a clean, readable email body that includes: o Top source IPs o IP under attack o Resource name/type o DNS name o Region o Tag info (owner, environment, etc.) o Link to Log Analytics search results o Status of connectivity test (code, headers, body) Queries Azure Monitor logs again (This time allows it to build a thorough DDoS Post Mitigation Report) After a 50-minute delay, it runs a query on the DDoS mitigation logs to extract: o Top source IPs o Top countries, ASNs, and continents o Time of mitigation o Traffic overview Note: This Delay is required but can be changed subtly. During this time, the post mitigation reports will be accumulated so it can be sent as an email in the next steps. Without this delay the reports will not populate correctly. Send a second email, titled "Post Mitigation DDoS Report", containing the above data. Post Mitigation Report plays a vital role in strengthening your defense strategy. By reviewing patterns in traffic origin, volume, and behavior, teams can: o Identify recurring attack sources or suspicious geographies o Correlate DDoS activity with other system anomalies o Fine-tune firewall and WAF rules based on attacker fingerprints In short, this enriched reporting not only enhances visibility but also enables teams to proactively adapt their security posture and reduce the impact of future attacks. Who gets notified? Office 365 API connector Both emails are sent using an authenticated Office 365 connector, delivered to the security team and tagged owner (which will be inputted during deployment). The high-priority email ensures visibility, while the second report gives retrospective clarity. Why this is useful: Reduces manual effort: No more pivoting across multiple tools to gather context Speeds up response: Teams get instant details Bridges Alert to Action: Combines signal (alert) with enrichment (resource graph + logs) and delivery (email) Customizable: You can adjust queries, recipients, or even trigger conditions Azure Monitor Logs API Connector The Azure Monitor Logs API Connector allows Logic Apps to query data from Log Analytics using Kusto Query Language (KQL). In this solution, it's essential for extracting DDoS-specific insights—such as top attacking IPs, countries, ASNs, and traffic volume—from diagnostic logs. What It Does in This Template: Executes KQL queries against your Log Analytics Workspace Retrieves: Flow logs from DDoSMitigationFlowLogs Mitigation reports from DDoSMitigationReports Delivers summarized data such as: Top attacker IPs Source ASNs and countries Mitigation start/end time Traffic patterns Here are some examples of the Automated & Enriched DDoS E-Mails: Potential Attack, First Email, as soon as an attack event is identified: Post Mitigation Summary Email: Conclusion: This Logic App doesn’t just automate alerting—it empowers your team with actionable context. By stitching together signals from Azure Monitor and Resource Graph, and packaging them into enriched, structured emails, it transforms raw alerts into informed decisions. Whether you're triaging incidents or conducting post-attack analysis, this setup ensures you're not starting from scratch each time. As attacks grow more complex, automation like this isn’t just nice to have—it’s essential. Start simple, adapt to your needs, and let your defenses work smarter.
