Forum Discussion
Cumulative update KB5003214 fails to install
Jauhar I have tried to upgrade Windows 10 using the media creation tool and it fix the same problem that you have mentioned. I have the same problem before installing KB5001330 and a lot of Cumulative Updates. Just select Upgrade This PC and make sure to select Keep Files and Apps to make sure that you still have the apps/files that you have before upgrading. For me, it takes about 1 hour from the Media Creation Tool up to a couple of restarts. But it depends on your internet speed. And now I can install all updates. Also tried SFC and DISM Scans but did not fix my problem. Upgrading your PC will replace your Windows Files, but not affects Files, Apps, and Drivers. After that, there will be some updates in the Windows Updates after the upgrade.
Optional:
Delete the ESD Folder in the C:/ directory
Settings/System/Storage/Temporary Files then scan our Temporary Files and delete the Previous Installation of Windows. (Deletes the Windows.old folder)
*Doing Optional things will make your drive space bigger as it deletes the files used in the upgrade, but its files will be needed if you have problems, to go back to the previous install/state.
Also, I tried it with my another PC, with an AMD A8 CPU that takes about 1 and a half hour for the upgrade process and it also fix the problem. Hope that works.
dism /online /add-package /packagepath:D:\Updates\windows10.0-kb5005565-x64_c5b235b81ae5acd9d11ff35edee287b663e5861a.cab
Installation only completed at 3.5% with a error message that the Component Store is corrupted.
Deleted Just an update. I managed to transfer all the boot system files from the D:\ drive to the c:\drive using cmd with admin rights with the following syntax
bcdboot c:\windows /s c:
There were two boot system files - bootmgr and bootnxt - left in root of the 😧 drive. These 2 files are copies of the ones transferred to the root of the C: drive by bcdboot. Because of this the 😧 drive still remained active. What I did next was to make the C:\drive active and the D:\drive inactive. By making the D:\drive inactive bootmgr and bootnxt no longer showed up in the root. Restarted the PC and Windows booted up with no issues.
- This is great information!
Congratulations. Deleted No issues with Windows booting up - its pretty quick. When I did a clean install of Windows I didn't disconnect my 😧 drive data HDD so some system files must have crept into this drive. The 3 system files I mentioned previously are in the root of the 😧 drive. The system files in the root of the C: drive are AMTAG.Bin, Dumpstack.log.tmp, hiberfil.sys, pagefile.sys and swapfile.sys.
The recovery system image was created OK. The image backup now includes the contents of the 😧 drive hence, it took longer to create and required more disk space.
You can see from my disk management console screenshot that no separate system reserve partition is shown on either the C: or the 😧 yet Windows boots up with no issue. Using Minitool it told me both are MBR partitions.
- But the recovery disk was created correctly - without these files?
Deleted Noticed there are the three files in the 😧 drive that are treating this 😧 drive as a system volume when creating a system image backup:
Bootmgr
bootnxt
bootsect.bak
Is there any safe way to move or copy these 3 files to C: drive.
- I would risk disconnecting drive D - but it is certainly difficult to predict whether the system will boot, but reinsisting drive D again - should restore the system.
But I have never had such a problem .
, so it is not checked and you will do it at your own risk. Deleted
I mentioned previously I managed to do a clean install of Windows 10 Version 21H1 on a brand new clean 1TB drive. I did make a mistake of not disconnecting my 😧 drive when I did the installation. Because of this, when I did a system image backup my 😧 drive was also backed up and there was no option not to select the 😧 drive. It transpired my 😧 drive is now treated as a system volume because when I did the clean install of Windows some boot files found their way into the 😧 drive hence, my image back up took longer and used more drive space. I did a printscreen (see below) of my disk management console.
The C: drive is Boot, Page File, Crash Dump, Primary Partition and the 😧 drive is System, Active Primary Partition. Both drives have MBR partitioning according to Minitool. You can also see the C:\ drive doesn’t show a System Reserve Partition, neither the 😧 drive shows any other partition.
So, can I disconnect my 😧 drive just to do a system image backup on the C:\ drive only and is there a way to disable the 😧 drive as a system volume without disconnecting it. Also, will Windows boots up without the 😧 drive connected ? The C: is already configured as the 1st boot priority after the DVD drive in the bios.
- Out of curiosity I used diskpart to check for any MBR or GPT partitions that I can't see. The following are the results:
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 931 GB 0 B
Disk 1 Online 931 GB 0 B
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 E DVD-ROM 0 B No Media
Volume 1 C NTFS Partition 931 GB Healthy Boot
Volume 2 D New Volume NTFS Partition 931 GB Healthy System
DISKPART> list partition
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 931 GB 1024 KB
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 E DVD-ROM 0 B No Media
Volume 1 C NTFS Partition 931 GB Healthy Boot
Volume 2 D New Volume NTFS Partition 931 GB Healthy System
It is telling me that the entire C: drive is boot. - I don't know if it's correct!
- I still have a couple of questions. I didn't install Windows 21H1 on a drive that previously had version 20H2 or older, Version 21H1 was installed on a brand new clean 1TB HDD. As I mentioned previously, I opened Disk Management Console and noticed :
1. I can't see any EFI or System Reserve Partition on my C: drive
2. In Properties, I there isn't a volume tab on either C: or 😧 drives
3. Because of (2) above I can't check whether especially the C: drive whether it has a MBR or GPT drive
I wonder whether this is a new feature in Windows 21H1 when installed on a clean HDD. Anyone had installed Windows 21H! or 11 on a clean HDD and noticed the same ?
