Forum Discussion
Windows 11 23h2 update or in place upgrade to 24h2 or 25h2 fails on reboot
For quite some time, I was trying to upgrade my home computer to 24h2, and it would always fail on reboot after reaching 100%. I received the standard stop code that points to a bad driver. Boot fail...
Temporarily disable the RAID controller in the BIOS or switch it to AHCI mode, then attempt to upgrade Windows. Once successful, re-enable the RAID configuration.
The RAID isn't set in the regular BIOS, as I am not using the AMD RAID capability, which is limited to a total number of 10 NVME drives on the system. The RAID10 array shows up as a single addressable, non-bootable drive in the BIOS, which it inherits from the BIOS of the dual SSD7505s. My SATA ports are set to AHCI.