Resolving WinRM errors and Exchange 2010 Management tools startup failures
As was discussed in the previous (related) blog post "Troubleshooting Exchange 2010 Management Tools startup issues", in Exchange 2010 the Management tools are dependent on IIS. As was discussed in that blog, we have seen situations where the management tool connection to the target Exchange server can fail, and the error that is returned can be difficult to troubleshoot. This generally (but not always) happens when Exchange 2010 is installed on an IIS server that is already in service, or when changes are made to the IIS server settings post Exchange Install. We have seen that these changes are usually done when the IIS administrator is attempting to "tighten up" IIS security by editing the Default Web Site or PowerShell vdir settings. The situation is further complicated by the fact that some of the errors presented have similar wording; most seem to originate with WinRM (Windows Remote Management), and in some cases different root problems can produce the exact same error message. In other words, depending on how knowledgeable you are with these errors, troubleshooting them is all around... not much fun. I was approached by a good friend of mine and he asked what I thought we could do to make these errors a little easier to troubleshoot. I was studying PowerShell and PowerShell programming at the time (I just happened to be reading Windows PowerShell for Exchange Server 2007 SP1), and I thought that this would be a perfect opportunity to try and apply what I was learning. This is the result. Introducing the Exchange Management Troubleshooter (or EMTshooter for short). What it does: The EMTshooter runs on the local (target) Exchange server and attempts to identify potential problems with management tools connection to it. The troubleshooter runs in 2 stages. First, it will look at the IIS Default Web Site, the PowerShell vdir, and other critical areas, to identify known causes of connection problems. If it identifies a problem with one of the pre-checks it will make a recommendation for resolving the problem. If the pre-checks pass, the troubleshooter will go ahead and try to connect to the server in the exact same way that the management tools would. If that connection attempt still results in a WinRM-style error, the troubleshooter will attempt to compare that error to a list of stored strings that we have taken from the related support cases that we have seen. If a match is found, the troubleshooter will display the known causes of that error in the CMD window. Here is an example of how this might look like: When I was designing the troubleshooter, I could have just written a little error lookup tool that handed over the appropriate content for the error you were getting, but I felt that was not as robust of a solution as I was aiming for (and not much of a learning experience for me). So the tool runs active pre-checks before moving on to the error look-up. The amount of pre-checks it can run depends on the flavor of OS you are running on and the options you have installed on it, such as WMI Compatibility. Basically, I have taken all of the documentation that has been created on these errors to date, and created a tool that will make the information available to you based on the error or problem it detects. Hopefully this will cut down on the amount of time it takes to resolve those problems. Event reporting: When you run the EMTshooter it will log events in the event log. All results that are displayed in the CMD window are also logged in the event log for record keeping. Events are logged to the Microsoft-Exchange-Troubleshooters/Operational event log and are pretty self-explanatory. Things to remember: Depending on your current settings, you may need to adjust the execution policy on your computer to run the troubleshooter, using: Set-ExecutionPolicy RemoteSigned Or Set-ExecutionPolicy Unrestricted Remember to set it back to your normal settings after running the troubleshooter. This version of the troubleshooter needs to run on the Exchange Server that the management tools are failing to connect to. While our final goal is that the troubleshooter will be able to run anywhere the Exchange Management tools are installed, the tool isn't quite there yet. We have seen instances where corruption in the PowerShell vdir or in IIS itself has resulted in errors that seemed to be caused by something else. For instance, we worked on a server that had an error that indicated a problem with the PowerShell vdir network path. But the path was correct. Then we noticed that the PowerShell vdir was missing all its modules, and quite a few other things. Somehow the PowerShell vdir on that Exchange Server had gotten severely... um... modified beyond repair. WinRM was returning the best error it could, and the troubleshooter took that error and listed the causes. None of which solved the problem. So be aware that there are scenarios that even this troubleshooter cannot help at this time. The troubleshooter is still a bit rough around the edges, and we plan to improve and expand its capabilities in the future. We also hope to be able to dig a little deeper into the PowerShell vdir settings as time goes on. Also note that the troubleshooter will NOT make any modification to your IIS configuration without explicitly asking you first. Permissions required: In order to run the troubleshooter, the user will have to have the rights to log on locally to the Exchange server (due to local nature of the troubleshooter at this time) and will need permissions to run Windows PowerShell. Installing the troubleshooter: First, you will need to download the troubleshooter ZIP file, which you can find attached to this post. Installing the EMTshooter is pretty easy. Just drop the 4 files from the ZIP file into 1 folder, rename them to .ps1 and run EMTshooter.ps1 from a normal (and local) PowerShell window. I personally just created a shortcut for it on my desktop with the following properties: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit -command ". 'C:\EMTshooter\EMTshooter.ps1'" However, as most users probably won't run this more than a few times you might not need or want an icon. Just remember that EMTshooter.ps1 is the main script to run. Providing feedback: As I mentioned before, the troubleshooter is still a work in progress. If you wish to provide feedback on it, please post a comment to this blog post. I will be monitoring it and replying as time allows, and also making updates to the troubleshooter if needed. If you run into errors that are not covered by the troubleshooter, please run the troubleshooter, reproduce the error through it and send me the transcript.txt file (you will find it in the folder where the 4 scripts have been placed), along with what you did to resolve the error (if the problem has been resolved). My email is sbryant AT Microsoft DOT com. Errors currently covered: Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid. Connecting to remote server failed with the following error message: The connection to the specified remote host was refused. Verify that the WS-Management service is running on the remote host and configured to listen for requests on the correct port and HTTP URL. Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true'. Connecting to remote server failed with the following error message : The WinRM client received an HTTP status code of 403 from the remote WS-Management service. Connecting to the remote server failed with the following error message: The WinRM client sent a request to an HTTP server and got a response saying the requested HTTP URL was not available. This is usually returned by a HTTP server that does not support the WS-Management protocol. Connecting to remote server failed with the following error message : The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: Connecting to remote server failed with the following error message : The WS-Management service does not support the request. Connecting to remote server failed with the following error message : The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer - Steve Bryant
1000 Free Udemy Coupons on Microsoft Power Automate With AI Builder
<<BAKRI ID(Id-ul-Ad'ha) -- 1000 FREE UDEMY COUPONS ON RPA>> On the Occasion of BAKRI ID(Id-ul-Ad'ha), I am very happy to share 1000 Free udemy coupons on Microsoft Power Automate With AI Builder Title : Advanced RPA - Microsoft Power Automate With AI Builder https://www.udemy.com/course/microsoft-power-automate-with-ai-builder/?couponCode=LT-BAKRID <<Our other courses on Udemy and Udemy Business>> Title : PL-500 Microsoft Power Automate RPA Developer BootCamp Link: https://www.udemy.com/course/pl-500-microsoft-power-automate-rpa-developer-bootcamp/?referralCode=891491BAB7F20B865EE6 Title 1: Become RPA Master in MS Power Automate Desktop https://www.udemy.com/course/microsoft-power-automate-desktop-tutorials-for-beginners/?referralCode=03D49B549EE2193E79EE Title 2: RPA : Microsoft Power Automate Desktop - Zero to Expert : 2 https://www.udemy.com/course/microsoft-power-automate-desktop-course-zero-to-expert-2/?referralCode=783F39A1D0CDB4A70A7C Title 3: RPA:Microsoft Power Automate Desktop:Intelligent Automation https://www.udemy.com/course/power-automate-desktop-course-intelligent-automation/?referralCode=E8C51F3C27EA98FE100C Connect with me on LinkedIn : https://www.linkedin.com/in/ameer-basha-p-b44880262/ Youtube Channel : www.youtube.com/learningtechnologies
