BLOG: Determine and modernize Filesystem Deduplication
Version history - 1.6 Added references / links - 1.5 Added insights from Steven Ekren. Many thanks! / Added ReFS Docs link and added clarification about drawbacks. - 1.4 revised script so ReFS volumes with classic dedup will be identified, added more eligibly checks and error handling - 1.3 added point #4 in migration guidance - 1.2 revised script - 1.1 formatting This blog explains the two Windows deduplication modes classic Windows Data Deduplication (ReFS or NTFS) and ReFS Deduplication (ReFS). It covers how they differ, why you should consider upgrading to Windows Server 2025 to leverage the new ReFS dedup engine, and clear warnings about scenarios where ReFS is not recommended. Practical migration guidance and detection commands are included. Differences between classic dedup and ReFS dedup File system: Classic dedup runs on NTFS or ReFS; ReFS dedup runs on ReFS and Windows Server 2025 or later, only. Implementation: They are separate engines with different metadata formats and management cmdlets. Management: Classic dedup uses the Dedup PowerShell module (Get‑DedupVolume, Start‑DedupJob, Disable‑DedupVolume). ReFS dedup uses its own ReFS dedup cmdlets (Get‑ReFSDedupStatus, Enable‑ReFSDedup). Conversion: There is no in‑place conversion between the two; metadata and chunk formats are incompatible. Improvements: the new in-line ReFS Deduplication leverages the advantages of ReFS files system. This makes deduplication more efficient and less CPU intensive. The new ReFS Deduplication can also compress data in-line using L1Z algorithm. This makes it up to par with enterprise solutions, often found in SAN storage or Linux appliances. Compression needs to be set per volume, and optional. Edit: Steven Ekren, a former Senior Product Manager for Hyper-V shared valuable insights on how both engines operate in a comment on LinkedIn: [...] the basic conceptual difference between WS Deduplication and ReFS deduplication is that the Windows Server [dedup] version takes the duplicate file data and moves it to a repository and puts a reparse point in the file system from each point that references the data. This involves data movement and therefore not recommended for workloads that are changing it's data often, but best for more static data like documents and picture/videos. ReFS is a file system that uses links natively for all the objects so leaving the data in place and managing the links is much more efficient and doesn't involve the data copy and managing a repository. Effectively it's built into the file system. As the blog notes, there are some situations not recommended for this version of dedupe, but generally it's lower performance and storage I/O impact. Why upgrade to Windows Server 2025 Improved version of ReFS Filesystem Improved ReFS in-line deduplication + optional L1Z compression: Server 2025 includes enhancements to ReFS dedup performance, scalability, and integration with modern storage features. Support and fixes: Windows Server 2016 and 2019 are past mainstream support, increasing the likelihood of costly support cases and delayed fixes; upgrading reduces operational risk and ensures access to ongoing improvements. Future compatibility: Newer OS releases receive optimizations and bug fixes for ReFS and dedup scenarios that older releases will not. SMB compression: for reasonably faster data transfer at minimal CPU when transferring data through the networks. Feature and security related improvements refer to availabile Microsoft Windows Server 2025 Summit content on techcommunity.microsoft.com Scenarios where ReFS is not recommended ReFS on SAN in clustered CSV environments: Avoid placing ReFS dedup on top of SAN‑backed Cluster Shared Volumes (CSVFS) in production clusters; clustered SAN/CSV scenarios causing severe performance issues in practice. Please refer to the ReFS documentation. (personal opinion and experience, not endorsed by Microsoft): Many small, fast‑changing files: Workloads with frequent small writes, such as user profiles, folder redirection of AppData folders, or applications that churn small config files (for example, Lotus Notes config files) can cause locks, performance degradation, or unexpected behavior on ReFS. Exclude these disks from dedup or keep them on NTFS. Note: Restrictions on high churn rate, like lockups or high RAM consumption, deadlocks / BSOD might have been addressed in Windows Server 2025 and the ReFS Dedup, see comment of Steven Ekren. Improving reliability and performance is a top goal for ReFS, to improve the adoption and feature parity with NTFS. For information about feature parity please refer to the ReFS documentation. Migration guidance The following instructions describe a high level and supported migration path from Windows deduplication using the NTFS file system to native ReFS Deduplication. Note: Step #3, data migration is not required when already using ReFS with Data Deduplication. In this case it's enough to execute step #1 and #2. Note: Validate on non‑production data first. Plan for rehydration time and network/storage throughput. Ensure backups are current before starting. Make sure to have a full backup before upgrading Server OS or making changes. 1. Disable classic dedup on the NTFS source: Disable-DedupVolume -Volume YourDriveLetter: 2. Rehydrate (un‑deduplicate) the data: Start-DedupJob -Volume YourDriveLetter: -Type Unoptimization 3. Copy or move data to a ReFS volume (new target): For straightforward NTFS→ReFS copies, robocopy is recommended. A GUI and job based alternative to this is the File Server Migration Feature (uses robocopy) in Windows Admin Center. For complex scenarios, open files long path names very large datasets (< 5 TB) or many small files restructuring, GUI (including Windows Server Core) automation, improved logging cloud/hybrid migrations I recommend the usage of GS RichCopy Enterprise by GuruSquad for higher speed (up to 40%) and reliability, compared to robocopy. 4. Optionally remove the Windows Server feature When there is no old deduplication in use consider to remove the feature. Your advantages of doing so: removes an unneccessary service. removes the file system filter driver for dedup, which causes performance impacts, even when not in use. removes the PowerShell commandlets for the old dedup, so they cannot mistakenly used by existing scripts, unaware admins etc. When migrating files over network: SMB compression: consider both source and target run Windows Server 2025 and leverage SMB compression. SMB Compression is available in Microsoft xcopy, Microsoft robocopy and Gurusquad GScopy Enterprise. Balancing and Teaming with SMB: SMB does not require LFBO or SET Teaming. It automagically detects network links and actively balances on its own on Windows Server 2016 and later. Using teaming, depending the configuration, can negatively affect transfer speed. Quick detection and diagnostic commands Check file systems: Get-Volume | Select DriveLetter, FileSystem Check classic dedup feature: Get-WindowsFeature -Name FS-Data-Deduplication Get-DedupVolume Get-DedupStatus Check ReFS dedup: Get-Command -Module Microsoft.ReFsDedup.Commands Get-ReFSDedupStatus -Volume YourDriveLetter: Diagnostic script to detect both: <# .SYNOPSIS Detects classic NTFS Data Deduplication and ReFS Deduplication across local volumes. .DESCRIPTION - Reports NTFS volumes with classic Data Dedup enabled. - Lists ReFS volumes present on the host. - If the ReFS dedup cmdlet exists AND OS build >= 26100, checks ReFS dedup status per ReFS volume. - Color coding: * Classic dedup enabled → Yellow * Classic dedup not enabled → Cyan * ReFS dedup enabled → Green * ReFS dedup not enabled → Cyan .NOTES Version: 1.7 Author: Karl Wester-Ebbinghaus + Copilot Requirements: Elevated PowerShell session, PowerShell 5.1 or newer Supported OS: Windows Server 2025, Azure Stack HCI 24H2 or newer Unsupported OS: Windows 10, Windows 11 (script terminates) #> #region Initialization Write-Verbose "Initializing variables and environment..." $Volumes = $null $Volume = $null $DedupVolumesList = $null $DedupReFSVolumesList = $null $DedupReFSVolumesListLetters = $null $DedupReFSStatus = $null $refsCmd = $null $OSBuild = $null $runReFSDedupChecks = $null #endregion Initialization #region Volume Discovery Clear-Host Write-Verbose "Querying NTFS and ReFS volumes..." $Volumes = Get-Volume | Where-Object FileSystem -in 'NTFS','ReFS' #endregion Volume Discovery #region ReFS Dedup Cmdlet, OS Build and OS SKU Detection Write-Verbose "Checking for ReFS deduplication cmdlet..." $refsCmd = Get-Command -Name Get-ReFSDedupStatus -ErrorAction SilentlyContinue Write-Verbose "Reading OS build number..." try { $OSBuild = [int](Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' -Name CurrentBuildNumber).CurrentBuildNumber } catch { Write-Verbose "Registry read for OS build failed. Falling back to Environment OSVersion." $OSBuild = [int][Environment]::OSVersion.Version.Build } # end try/catch for OS build detection Write-Verbose "Checking OS InstallationType and EditionID..." $CurrentVersionKey = Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' $InstallationType = $CurrentVersionKey.InstallationType # "Client" or "Server" $EditionID = $CurrentVersionKey.EditionID # e.g. "AzureStackHCI", "ServerStandard", etc. Write-Verbose "Detected InstallationType: $InstallationType" Write-Verbose "Detected EditionID: $EditionID" Write-Verbose "Detected OSBuild: $OSBuild" # Block Windows 10/11 (Client OS) if ($InstallationType -eq 'Client') { Write-Error "Unsupported OS detected: Windows Client (Windows 10/11). Only Windows Server or Azure Stack HCI are supported. Script will terminate." exit } # Allow Azure Stack HCI explicitly if ($EditionID -eq 'AzureStackHCI') { Write-Verbose "Azure Stack HCI detected. Supported platform." } else { # Must be Windows Server if ($InstallationType -ne 'Server') { Write-Error "Unsupported OS detected. Only Windows Server or Azure Stack HCI are supported. Script will terminate." exit } Write-Verbose "Windows Server detected (EditionID: $EditionID). Supported platform." } Write-Verbose "Evaluating ReFS dedup eligibility based on cmdlet presence and build >= 26100..." $runReFSDedupChecks = $false if ($refsCmd -and ($OSBuild -ge 26100)) { $runReFSDedupChecks = $true Write-Verbose "ReFS dedup checks ENABLED (cmdlet present and OS build >= 26100)." } else { Write-Verbose "ReFS dedup checks DISABLED (cmdlet missing or OS build < 26100)." } #endregion ReFS Dedup Cmdlet, OS Build and OS SKU Detection #region Main Loop foreach ($Volume in $Volumes) { # begin foreach volume loop Write-Host "Volume $($Volume.DriveLetter): ($($Volume.FileSystem))" Write-Verbose "Processing volume $($Volume.DriveLetter)..." #region Classic Dedup + ReFS Volume Listing if ($Volume.FileSystem -eq 'NTFS' -or $Volume.FileSystem -eq 'ReFS') { Write-Verbose "Checking classic deduplication status for volume $($Volume.DriveLetter)..." $DedupVolumesList = Get-DedupVolume -Volume $Volume.DriveLetter -ErrorAction SilentlyContinue if ($DedupVolumesList) { Write-Host " → Classic Data Dedup ENABLED on $($Volume.DriveLetter), $($Volume.FileSystem)" -ForegroundColor Yellow } else { Write-Host " → Classic Data Dedup NOT enabled on $($Volume.DriveLetter),$($Volume.FileSystem)" -ForegroundColor Cyan } # end if classic dedup enabled Write-Verbose "Listing ReFS volumes on host..." $DedupReFSVolumesList = Get-Volume | Where-Object FileSystem -eq 'ReFS' if ($DedupReFSVolumesList) { $DedupReFSVolumesListLetters = ($DedupReFSVolumesList | ForEach-Object { $_.DriveLetter }) -join ',' Write-Host " → ReFS volumes present on host: $DedupReFSVolumesListLetters" } else { Write-Host " → No ReFS volumes detected on host" } # end if ReFS volumes present } # end NTFS/ReFS block #endregion Classic Dedup + ReFS Volume Listing #region ReFS Dedup Status if ($Volume.FileSystem -eq 'ReFS') { if ($runReFSDedupChecks) { Write-Verbose "Checking ReFS deduplication status for volume $($Volume.DriveLetter)..." $DedupReFSStatus = Get-ReFSDedupStatus -Volume $Volume.DriveLetter -ErrorAction SilentlyContinue if ($DedupReFSStatus) { Write-Host " → ReFS Dedup ENABLED on $($Volume.DriveLetter), $($Volume.FileSystem)" -ForegroundColor Green } else { Write-Host " → ReFS Dedup NOT enabled on $($Volume.DriveLetter), $($Volume.FileSystem)" -ForegroundColor Cyan } # end if ReFS dedup enabled } else { if (-not $refsCmd) { Write-Error " → Skipping ReFS dedup check: Get-ReFSDedupStatus cmdlet not present" -ForegroundColor Cyan } else { Write-Error " → Skipping ReFS dedup check: OS build $OSBuild < required 26100" -ForegroundColor Cyan } # end reason for skipping ReFS dedup check } # end if runReFSDedupChecks } # end if ReFS filesystem block #endregion ReFS Dedup Status Write-Host "" } # end foreach volume loop #endregion Main Loop #region End Write-Verbose "Script completed." #endregion End Recommendations and next steps Inventory: Identify volumes using NTFS dedup and ReFS dedup, and map workloads that create many small or rapidly changing files. Plan: Schedule rehydration and migration windows; test ReFS dedup on representative datasets. Upgrade: Prioritize upgrading servers still on 2016/2019 (End of Mainstream Support) to reduce support risk and gain the latest ReFS dedup improvements. Kindly consider reading my Windows Server Installation Guidance and Windows Server Upgrade Guidance Exclude: Keep user profiles, AppData, and other high‑churn small‑file paths off ReFS dedup or on NTFS. Consider ReFS Dedup with Compression: Enable compression optionally. Mind ReFS dedup compression is not the same as compress files integration in File Explorer or File Explorer properties (Windows 9x). It's transparent to the application Make smart decisions: Avoid using dedup when the dataset is changing fast or your dedup + compression rate is below 20%. Usually you can expect 40% or more savings, and up to 80% in specific use cases like VDI VHDX with ReFS Dedup + Compression. Plan your dedup jobs: Ensure of making use of the planning features for dedup jobs through PowerShell or Windows Admin Center (WAC) when using ReFS dedup on more than one volume per Server. Otherwise they might all run at the same time and impact your storage performance (esp. spinning rust) and consumption of RAM and CPU. Share and Educate: Inform your infrastructure team about the changes so they avoid using the traditional dedup on ReFS. Related blogposts: https://splitbrain.com/windows-data-deduplication-vs-refs-deduplication/ , Thanks Darryl van der Peijl and team. https://www.veeam.com/kb2023 Veeam best practices about Windows Deduplication and ReFS Deduplication.
Get-ClusterExcludedAdapter cmdlet
Following link https://learn.microsoft.com/en-us/powershell/module/failoverclusters/get-clusterexcludedadapter?view=windowsserver2025-ps when execute Get-ClusterExcludedAdapter cmdlet with error below Get-ClusterExcludedAdapter : The term 'Get-ClusterExcludedAdapter' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:1 + Get-ClusterExcludedAdapter + ~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (Get-ClusterExcludedAdapter:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException same for cmdlet Add-ClusterExcludedAdapter (https://learn.microsoft.com/en-us/powershell/module/failoverclusters/add-clusterexcludedadapter?view=windowsserver2025-ps) Does anyone know why these commands are not available?
PowerShell counterpart for Failover Cluster Manager "Live Migration Settings"
In Failover Cluster Manager, there's "Live Migration Settings" where I can define what cluster networks I want to carry live migration traffic. Even after some research, I cannot find a PowerShell cmdlet that lets me do the same...
Get-PartitionSupportedSize hangs forever when Azure File Sync is installed
This is occurring on several servers and all volumes that file sync setup Command: Get-PartitionSupportedSize -DiskNumber 5 -PartitionNumber 2 Server info: Windows 2019 VMware RDM disk setup to 3PAR storage. If I stop with above all works perfectly and has for years and previous windows versions I install Azure File Sync and the command hangs and will never return to a prompt. No error no output. This has to be some sort of bug right? Cannot find any info about this. We have several automated disk extension runbooks that need this resolved Any suggestions?Windows Server OSConfig and DSCv3
Introduction I wanted to formalize putting a post out here to get some discussion going on the attempts at modernization of Windows configuration, and importantly, infrastructure-as-code. Hopefully this is a healthy discussion that others can engage in. Much of what I'm going to try and post about is stuff we already are aware of, but I want to highlight how this is an ongoing concern with the Windows Server platform that makes it difficult to encourage people to even consider Windows in their environment other than for extremely legacy purposes. I want Windows Server to be the best it can be, and I encourage others to join in on the conversation! Problem Statement Windows Server needs a modernized configuration-as-code system. Must be capable of orchestrating without cloud tools (offline orchestration) Must provide for regular validation and attestation Ideally should be easily available to 3rd party configuration tools. Since Microsoft appears to have little interest in building their own modernized system that isn't Azure-based, this means that this MUST be orchestrated easily and securely by 3rd party tools. Should be as robust as GPO at maintaining and enforcing state. Security configurations in Windows are a right pain to manage with any 3rd party tooling, with the closest coming to it being the SecurityDSC module which wraps secedit.exe and security policy INFs. Why is OSConfig not the answer? OSConfig doesn't provide for me, as an engineer, to clearly define what the state of my machines are based on my company's business requirements. While the built-in Microsoft policy recommendations are great, there are reasons to deviate from these policies in a predictable and idempotent manner. Applying an OSConfig Baseline -> Then changing settings as-needed with special PowerShell commands This is not the answer. This is a bunch of imperative code that serves nobody. And it makes implementing this feature extremely challenging in today's modern world of Kubernetes, Docker, etc. I encourage the Windows Server team to engage with the PowerShell team on DSC 3.0. I think that team has it right, but they are a small group of people and do not have the resources to implement everything that would make DSC 3.0 a first-class configuration as code platform on Windows. And this is where the Windows team should come in. Steve Lee and crew have done a bangup job working on DSC 3.0, including taking feedback from folks to leverage Azure Bicep language for configuration. Security Policy Challenge The way to access security policies need to change. Even if I were to take DSC 3.0 I'd end up having to create a similar security policy INF file to import into Windows. It just seems so silly to me to have to write all of that out when Windows really should just provide an interface for doing this. In fact, security policy remains to be one of the largest problems to getting a good platform stood up. Windows Firewall Policy and GPO - The reason why host-based firewalling is painful to manage at scale in a Windows environment. GPO is definitely not the right place to be managing Windows firewall policy at scale. Particularly when you often have a core set of management rules you want to implement and application-specific needs. Making robust changes becomes a challenge since each policy is separate, preventing you from doing things like inheriting rules for higher level policies. While this is an inherent limitation of Group Policy, it highlights the need to get off of GPO as the core policy configuration tool for Windows. My recommendations I'd like for the Windows team to implement DSC 3.0-compatible resources for managing all core functionality of Windows. If you can do it in a GPO, you should be able to do it with Configuration as Code. Please stop relying on the community to make this work. All of this should be first party to the platform itself. Furthermore, I'd like to recommend that Microsoft either work with 3rd party configuration systems (Chef, Ansible, Puppet, Octopus, etc.) OR to also provide a way to hit the ground running. Perhaps something that integrates visually into Windows Admin Center would be nice. Conclusion This is a huge problem in the Windows world and continues to seem to fall on some deaf ears somewhere in the organization. While I no doubt am confident that the engineers on all of these teams very well know these issues and maybe even have discussed fixing them, clearly there's a breakdown somewhere.PowerShell, Hyper-V: Examine network object relationships.
Is it possible in PowerShell do do things like: Get all VMNetworkAdapters connected to a given VMSwitch Get all VMNetworkAdapters provided by a hypervisor (conected to either a VM or the management OS) When I have the name of a VMNetworkAdapter only, determine whether it's connected to the management OS, or a VM, and if connected to a VM, what VM that is without examining each single endpoint (VM, management OS) and creating a database of objects and their relationships that allows me to get the desired information? Certainly not a couple of PowerShell code lines only, and depending on the size and type (remote, local) of the virtualization environment, I can imagine that time is a factor too.BLOG: Windows Server / Azure Local keeps setting Live Migration to 1 - here is why
Affected products: Windows Server 2022, Windows Server 2025 Azure Local 21H2, Azure Local 22H2, Azure Local 23H2 Network ATC Dear Community, I have seen numerous reports from customers running Windows Server 2022 servers or Azure Local (Azure Stack HCI) that Live Migration settings are constantly changed to 1 per Hyper-V Host, as mirrored in PowerShell and Hyper-V Host Settings. The customer previously set the value to 4 via PowerShell, so he could prove it was a different value at a certain time. First, I didn't step into intense research why the configuration altered over time, but the stumbled across it, quite accidently, when fetching all parameters of Get-Cluster. According to an article a LCU back in September 2022 changed the default behaviour and allows to specify the live migrations at cluster level. The new live migration default appears to be 1 at cluster level and this forces to change the values on the Hyper-V nodes to 1 accordingly. In contrast to the commandlet documentation, the value is not 2, which would make more sense. Quite unknown, as not documented in the LCU KB5017381 itself, but only referenced in the documentation for the PowerShell commandlet Get-Cluster. Frankly, none of the aren't areas customers nor partners would check quite regularly to spot any of such relevant feature improvements or changes. "Beginning with the 2022-09 Cumulative Update, you can now configure the number of parallel live migrations within a cluster. For more information, see KB5017381 for Windows Server 2022 and KB5017382 for Azure Stack HCI (Azure Local), version 21H2. (Get-Cluster).MaximumParallelMigrations = 2 The example above sets the cluster property MaximumParallelMigrations to a value of 2, limiting the number of live migrations that a cluster node can participate in. Both existing and new cluster nodes inherit this value of 2 because it's a cluster property. Setting the cluster property overrides any values configured using the Set-VMHost command." Network ATC in Azure Local 22H2+ and Windows Server 2025+: When using Network ATC in Windows Server 2025 and Azure Local, it will set the live migration to 1 per default and enforce this across all cluster nodes. Disregarding the Cluster Settings above or Local Hyper-V Settings. To change the number of live migration you can specify a cluster-wide override in Network ATC. Conclusion: The default values for live migration have been changes. The global cluster setting or Network ATC forcing these down to the Hyper-V hosts based on Windows Server 2022+/ Azure Local nodes and ensure consistency. Previously we thought this would happen after using Windows Admin Center (WAC) when opening the WAC cluster settings, but this was not the initial cause. Finding references: Later the day, as my interest grew about this change I found an official announcement. In agreement to another article, on optimizing live migrations, the default value should be 2, but for some reason at most customers, even on fresh installations and clusters, it is set to 1. TLDR: 1. Stop bothering on changing the Livemigration setting manually or PowerShell or DSC / Policy. 2. Today and in future train your muscle memory to change live migration at cluster level with Get-Cluster, or via Network ATC overrides. These will be forced down quite immediately to all nodes and will be automatically corrected if there is any configuration drift on a node. 3. Check and set the live migration value to 2 as per default and follow these recommendations: Optimizing Hyper-V Live Migrations on an Hyperconverged Infrastructure | Microsoft Community Hub Optimizing your Hyper-V hosts | Microsoft Community Hub 4. You can stop blaming WAC or overeager colleagues for changing the LM settings to undesirable values over and over. Starting with Windows Admin Center (WAC) 2306, you can set the Live Migration Settings at cluster level in Cluster > Settings. Happy Clustering! 😀
