Forum Discussion
ConfigMgr 2603 PXE suddenly stopped working
Given that PXE reaches the DP but hangs when downloading the boot image, I'd focus on TFTP communication between the client and the DP, rather than rebuilding boot images or task sequences.
I'd check these first:
1. TFTP ports: Ensure UDP 69 is reachable, along with the negotiated TFTP transfer ports. Don't just test UDP 69; TFTP uses additional UDP ports for data transfer.
2. IP helpers: Verify the DHCP relay forwards PXE traffic correctly to the DP. Since DHCP is remote, check that no recent network changes affected the relay.
3. WDS configuration: Check that WDS is listening correctly and that the RemoteInstall share is accessible.
4. SMSPXE.log: Look for the boot image being selected and the response sent to the client. This helps establish whether the failure occurs before or during image transfer.
5. Check recent changes around November 10: Windows updates, firewall changes, network firmware, security policies or ConfigMgr hotfixes.
One particularly useful test: Capture network traffic on the DP during a PXE attempt. Filter on:
text
```text
tftp || udp.port == 69
```
Look for unanswered TFTP requests or failed data transfers.
My suspicion is a TFTP transfer problem, potentially involving UDP dynamic ports or a network change.
Question: When the client hangs, does SMSPXE.log show that the boot image was successfully selected and offered, or does it stop before that point?
- ThomasJensenNov 19, 2026Copper Contributor
I ran a packet trace during my last test and it nothing shows up for tftp || udp.port == 69.
interesting thing is I see a 5 min delay from when the pxe/request comes in and when the client boot reply goes through.
Side note: working with Microsoft we removed WDS and trying to use the deploy pxe without WDS method.
11:59 pm
Packet: Operation: 1 (request), AdrType: 1, AdrLen: 6, HopCount: 0, TransactID: f0180373, BootTime: 28, Addr: mac:00:00:00:00:00:00:00:00:00:00, HostName: , BootFile: , ClientIP: 0.0.0.0, HostIP: 0.0.0.0, ServerIP: 0.0.0.0, RelayIP: 0.0.0.0
Options:
12:04 PM
Client Boot Get ID Info reply: <ClientIDReply><Identification Unknown="0" DuplicateSMBIOS="0" DuplicateMACAddress="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><ClientIDInfo ItemKey="0" ClientID="" DuplicateSMBIOS="0" DuplicateMACAddress="0" MatchType="0"/></ClientIDReply>
PXE: mac 0, , SMBIOS ID is NOT a match, MAC Address is NOT a match. SCCMPXE 11/19/2026 12:04:01 PM 3016 (0x0BC8)
PXE: 48:90:F0:94:F7:EC: No valid system records. SCCMPXE 11/19/2026 12:04:01 PM 3016 (0x0BC8)
PXE: 48:90:F0:94:F7:EC: Client machine is UNKNOWN. SCCMPXE 11/19/2026 12:04:01 PM 3016 (0x0BC8)
PXE: mac: Using Management Point: http://mp.domain.com SCCMPXE 11/19/2026 12:04:01 PM 3016 (0x0BC8)