New block screen capture for iOS/iPadOS MAM protected apps
Following the announcement of Microsoft Intune support for Apple Intelligence, we recently introduced support to block screen capture for mobile application management (MAM) protected apps. This blog provides details of the default screen capture behavior to help you understand how it affects your users and the settings available to change the default behaviour. Background Previously, for iOS/iPadOS, there were no controls to limit screen captures per application, per user or without device enrollment. this resulted in a gap for organizations with only MAM protection. As part of our secure-by-default commitment, the new default behavior for your MAM-protected app may have changed. Now, based on your Intune app protection policy settings, when a user attempts to screen capture or share the screen from a managed account within a MAM-protected app, a blank screen will be captured instead of the actual screen image. How the MAM block screen capture works In Intune, the screen capture is controlled using the existing Send Org data to other apps setting within the Data Protection section of the iOS app protection policy (APP) and is blocked if both the following conditions are met: The app (Microsoft apps, third-party apps, or your line-of-business (LOB) app) is updated to use Intune App SDK v19.7.6 or later for Xcode 15 and v20.2.1 or later for Xcode 16. The app is targeted by APP and the setting Send Org data to other apps is set to “None” or any of the “Policy managed apps...” values. If Send Org data to other apps is configured to “All Apps”, the screen capture for your MAM protected apps isn’t blocked. Changing the default MAM screen capture block For some scenarios, you may wish to allow screen capture while retaining the existing APP configuration, such as allowing screen capture and sharing to policy managed apps. Therefore, we introduced a Managed app configuration key com.microsoft.intune.mam.screencapturecontrol = Disabled” to override the default behavior. To allow screen capture on iOS devices targeted with an app protection policy, follow these steps: Navigate to the Microsoft Intune admin center. Select Apps > App configuration policies > Create > Managed apps. On the Basics page, select the apps you wish to target. For this example we’ve selected Outlook (iOS/iPadOS), Teams (iOS/iPadOS) and an LOB app. On the Settings page, within the "General configuration settings” section, add the key "com.microsoft.intune.mam.screencapturecontrol" with the value "Disabled". Assign the configuration policy to the users who you want to target with the override setting. For more details, refer to Add an app configuration policy for managed apps on iOS/iPadOS and Android devices. Conclusion To keep your organizations secure, based on your policy, all screen capture attempts are blocked for MAM protected apps. The managed app configuration settings detailed in this blog allows you to override the default settings to meet any specific requirements within your organization. Stay tuned to What's new in Microsoft Intune for future improvements to the blocking screen capture capabilities and more Apple Intelligence features. Let us know if you have any questions by leaving a comment on this post or reaching out on X @IntuneSuppTeam.Blocking and removing apps on Intune managed devices (Windows, iOS/iPadOS, Android and macOS)
By: Michael Dineen - Sr. Product Manager | Microsoft Intune This blog was written to provide guidance to Microsoft Intune admins that need to block or remove apps on their managed endpoints. This includes blocking the DeepSeek – AI Assistant app in accordance with government and company guidelines across the world (e.g. the Australian Government’s Department of Home Affairs Protective Policy Framework (PSPF) Direction 001-2025, Italy, South Korea). Guidance provided in this blog uses the DeepSeek – AI Assistant and associated website as an example, but you can use the provided guidance for other apps and websites as well. The information provided in this guidance is supplemental to previously provided guidance which is more exhaustive in the steps administrators need to take to identify, report on, and block prohibited apps across their managed and unmanaged mobile devices: Support tip: Removing and preventing the use of applications on iOS/iPadOS and Android devices. iOS/iPadOS devices For ease of reference, the below information is required to block the DeepSeek – AI Assistant app: App name: DeepSeek – AI Assistant Bundle ID: com.deepseek.chat Link to Apple app store page: DeepSeek – AI Assistant Publisher: 杭州深度求索人工智能基础技术研究有限公司 Corporate devices (Supervised) Hide and prevent the launch of the DeepSeek – AI Assistant app The most effective way to block an app on supervised iOS/iPadOS devices is to block the app from being shown or being launchable. Create a new device configuration profile and select Settings Catalog for the profile type. (Devices > iOS/iPadOS > Configuration profiles). On the Configuration settings tab, select Add settings and search for Blocked App Bundle IDs. Select the Restrictionscategory and then select the checkbox next to the Blocked App Bundle IDs setting. > Devices > Configuration profile settings picker = 'Blocked App Bundle IDs' Enter the Bundle ID: com.deepseek.chat Assign the policy to either a device or user group. Note: The ability to hide and prevent the launch of specific apps is only available on supervised iOS/iPadOS devices. Unsupervised devices, including personal devices, can’t use this option. Uninstall the DeepSeek – AI Assistant app If a user has already installed the app via the Apple App Store, even though they will be unable to launch it when the previously described policy is configured, it’ll persist on the device. Use the steps below to automatically uninstall the app on devices that have it installed. This policy will also uninstall the app if it somehow gets installed at any point in the future, while the policy remains assigned. Navigate to Apps > iOS/iPadOS apps. Select + Add and choose iOS store app from the list. Search for DeepSeek – AI Assistant and Select. > Apps > iOS/iPadOS > Add App searching for 'DeepSeek - AI Assistant' app Accept the default settings, then Next. Modify the Scope tags as required. On the Assignments tab, under the Uninstall section, select + Add group or select + Add all users or + Add all devices, depending on your organization’s needs. Click the Create button on the Review + create tab to complete the setup. Monitor the status of the uninstall by navigating to Apps > iOS/iPadOS, selecting the app, and then selecting Device install status or User install status. The status will change to Not installed. Personal Devices – Bring your own device (BYOD) Admins have fewer options to manage settings and apps on personal devices. Apple provides no facility on unsupervised (including personal) iOS/iPadOS devices to hide or block access to specified apps. Instead, admins have the following options: Use an Intune compliance policy to prevent access to corporate data via Microsoft Entra Conditional Access (simplest and quickest to implement). Use a report to identify personal devices with specific apps installed. Takeover the app with the user’s consent. Uninstall the app. This guide will focus on option 1. For further guidance on the other options refer to: Support tip: Removing and preventing the use of applications on iOS/iPadOS and Android devices. Identify personal devices that have DeepSeek – AI Assistant installed and prevent access to corporate resources You can use compliance policies in Intune to mark a device as either “compliant” or “not compliant” based on several properties, such as whether a specific app is installed. Combined with Conditional Access, you can now prevent the user from accessing protected company resources when using a non-compliant device. Create an iOS/iPadOS compliance policy, by navigating to Devices > iOS/iPadOS > Compliance policies > Create policy. On the Compliance settings tab, under System Security > Restricted apps, enter the name and app Bundle ID and select Next. Name: DeepSeek – AI Assistant Bundle ID: com.deepseek.chat Under Actions for noncompliance, leave the default action Mark device noncompliant configured to Immediately and then select Next. Assign any Scope tags as required and select Next. Assign the policy to a user or device group and select Next. Review the policy and select Create. Devices that have the DeepSeek – AI Assistant app installed are shown in the Monitor section of the compliance policy. Navigate to the compliance policy and select Device status, under Monitor > View report. Devices that have the restricted app installed are shown in the report and marked as “Not compliant”. When combined with the Require device to be marked as compliant grant control, Conditional Access blocks access to protected corporate resources on devices that have the specified app installed. Android devices Android Enterprise corporate owned, fully managed devices Admins can optionally choose to allow only designated apps to be installed on corporate owned fully managed devices by configuring Allow access to all apps in Google Play store in a device restrictions policy. If this setting has been configured as Block or Not configured (the default), no additional configuration is required as users are only able to install apps allowed by the administrator. Uninstall DeepSeek To uninstall the app, and prevent it from being installed via the Google Play Store perform the following steps: Add a Managed Google Play app in the Microsoft Intune admin center by navigating to Apps > Android > Add, then select Managed Google Play app from the drop-down menu. r DeepSeek – AI Assistant in the Search bar, select the app in the results and click Select and then Sync. Navigate to Apps > Android and select DeepSeek – AI Assistant > Properties > Edit next to Assignments. Under the Uninstall section, add a user or device group and select Review + save and then Save. After the next sync, Google Play will uninstall the app, and the user will receive a notification on their managed device that the app was “deleted by your admin”: The Google Play Store will no longer display the app. If the user attempts to install or access the app directly via a link, the example error below is displayed on the user’s managed device: Android Enterprise personally owned devices with work profile For Android Enterprise personally owned devices with a work profile, use the same settings as described in the Android Enterprise corporate owned, fully managed devices section to uninstall and prevent the installation of restricted apps in the work profile. Note: Apps installed outside of the work profile can’t be managed by design. Windows devices You can block users from accessing the DeepSeek website on Windows devices that are enrolled into Microsoft Defender for Endpoint. Blocking users’ access to the website will also prevent them from adding DeepSeek as a progressive web app (PWA). This guidance assumes that devices are already enrolled into Microsoft Defender for Endpoint. Using Microsoft Defender for Endpoint to block access to websites in Microsoft Edge First, Custom Network Indicators needs to be enabled. Note: After configuring this setting, it may take up to 48 hours after a policy is created for a URL or IP Address to be blocked on a device. Access the Microsoft Defender admin center and navigate to Settings > Endpoints > Advanced features and enable Custom Network Indicators by selecting the corresponding radio button. Select Save preferences. Next, create a Custom Network Indicator. Navigate to Settings > Endpoints > Indicators and select URLs/Domains and click Add Item. Enter the following, and then click Next: URL/Domain: https://deepseek.com Title: DeepSeek Description: Block network access to DeepSeek Expires on (UTC): Never You can optionally generate an alert when a website is blocked by network protection by configuring the following and click Next: Generate alert: Ticked Severity: Informational Category: Unwanted software Note: Change the above settings according to your organization’s requirements. Select Block execution as the Action and click Next, review the Organizational scope and click Next. Review the summary and click Submit. Note: After configuring the Custom Network Indicator, it can take up to 48 hours for the URL to be blocked on a device. Once the Custom Network Indicator becomes active, the user will experience the following when attempting to access the DeepSeek website via Microsoft Edge: Using Defender for Endpoint to block websites in other browsers After configuring the above steps to block access to DeepSeek in Microsoft Edge, admins can leverage Network Protection to block access to DeepSeek in other browsers. Create a new Settings Catalog policy by navigating to Devices > Windows > Configuration > + Create > New Policy and selecting the following then click Create: Platform: Windows 10 and later Profile type: Settings Catalog Enter a name and description and click Next. Click + Add settings and in the search field, type Network Protection and click Search. Select the Defender category and select the checkbox next to Enable Network Protection. Close the settings picker and change the drop-down selection to Enabled (block mode) and click Next. Assign Scope Tags as required and click Next. Assign the policy to a user or device group and click Next. Review the policy and click Create. When users attempt to access the website in other browsers, they will experience an error that the content is blocked by their admin. macOS macOS devices that are onboarded to Defender for Endpoint and have Network Protection enabled are also unable to access the DeepSeek website in any browser as the same Custom Network Indicator works across both Windows and macOS. Ensure that you have configured the Custom Network Indicator as described earlier in the guidance. Enable Network Protection Enable Network Protection on macOS devices by performing the following in the Microsoft Intune admin center: Create a new configuration profile by navigating to Devices > macOS > Configuration > + Create > New Policy > Settings Catalog and select Create. Enter an appropriate name and description and select Next. Click + Add settings and in the search bar, enter Network Protection and select Search. Select the Microsoft Defender Network protection category and select the checkbox next to Enforcement Level and close the Settings Picker window. In the dropdown menu next to Enforcement Level, select Block and select Next. Add Scope Tags as required and select Next. Assign the policy to a user or devices group and select Next. Review the policy and select Create. The user when attempting to access the website will experience the following: http://www.deepseek.com showing error: This site can't be reached Conclusion This blog serves as a quick guide for admins needing to block and remove specific applications on their Intune managed endpoints in regulated organizations. Additional guidance for other mobile device enrollment methods can be found here: Support tip: Removing and preventing the use of applications on iOS/iPadOS and Android devices. Additional resources For further control and management of user access to unapproved DeepSeek services, consider utilizing the following resources. This article provides insights into monitoring and gaining visibility into DeepSeek usage within your organization using Microsoft Defender XDR. Additionally, our Microsoft Purview guide offers valuable information on managing AI services and ensuring compliance with organizational policies. These resources can help enhance your security posture and ensure that only approved applications are accessible to users. Let us know if you have any questions by leaving a comment on this post or reaching out on X @IntuneSuppTeam.Support tip: Troubleshoot device cap reached when enrolling devices into Microsoft Intune
By: Premkumar N – Security Customer Experience Engineer | Microsoft Intune When Microsoft Entra or Intune device limits are reached, users will encounter an error when enrolling their device into Intune. While it can be difficult to understand the reason for the failure from the error message, this blog will explain the differences between Microsoft Entra device registration limit and the Intune device enrollment limit, along with the steps to resolve these issues. For an overview of Microsoft Entra and Intune device limit scenarios refer to: Understand Intune and Microsoft Entra device limit restrictions. Let’s look at the experiences on different platforms, followed by the resolution steps. Android Intune device limit reached When the Intune device limit is reached, an Android device enrollment will fail with the following error: To diagnose the issue, review the Intune Company Portal logs for the affected device. Capturing Company Portal logs: Users can select "Email Support" from the error screen to send the logs via email or Send logs from Company Portal. If the Company Portal logs display the “Device Cap Reached” error as shown in the example logs below, this indicates that the Intune device limit has been reached. 2025-07-16T15:07:39.8410000 VERB o.zzafi 13923 6035 sending event: EnrollmentFailureEvent( networkState=CONNECTED, enrollmentFlowType=Enrollment, enrollmentType=AfwProfileOwner, failureName=DeviceEnrollmentFailure, errorException=com.microsoft.windowsintune.companyportal.exceptions.EnrollmentException: Server error = <s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope" xmlns:a="http://www.w3.org/2005/08/addressing"> <s:Body> <s:Fault> <s:Code> <s:Value>s:Receiver</s:Value> <s:Subcode> <s:Value>s:Authorization</s:Value> </s:Subcode> </s:Code> <s:Reason> <s:Text xml:lang="en-US">Device Cap Reached</s:Text> </s:Reason> <s:Detail> <DeviceEnrollmentServiceError xmlns="http://schemas.microsoft.com/windows/pki/2009/01/enrollment"> <ErrorType>DeviceCapReached</ErrorType> <Message>Device Cap Reached</Message> <TraceId>xxx</TraceId> </DeviceEnrollmentServiceError> </s:Detail> </s:Fault> </s:Body> </s:Envelope>, errorMessage=, sessionGuid=xxx ) By default, Intune allows a maximum of 15 devices per user; exceeding this limit logs an error in the Company Portal. To address this issue, either remove inactive devices that have not checked in to Intune within a specified timeframe, or increase the device limit (up to 15) in the Intune settings. To remove stale devices: Navigate to the Microsoft Intune admin center > Devices > All Devices. Search using the affected user's UPN to view all enrolled devices. Remove any devices no longer in use. To increase the device limit: Navigate to the Microsoft Intune admin center > Devices > Enrollment > Device Limit Restrictions. Select the policy, go to Properties, then edit Device Limit, and adjust the limit (maximum 15). Note: If the Intune device limit is reached, errors are logged in the Microsoft Intune admin center under Devices > Monitor > Enrollment failures. Microsoft Entra device limit reached For Android, users will see the same error message when Microsoft Entra device limit has been reached. You can confirm the Microsoft Entra device limit has been reached by checking the Company Portal logs for the following error: com.microsoft.identity.broker4j.workplacejoin.exception.DrsErrorResponseException: { "code": "invalid_request", "subcode": "error_directory_quota_exceeded", "message": "User 'xxx' is not eligible to enroll a device of type 'Android'. Reason 'DeviceCapReached'.", "operation": "DeviceJoin", "requestid": "xxx", "time": "xxx" } Similar to the Intune device limit reached, to resolve this issue either increase the device limit in Microsoft Entra for Microsoft Entra registration or remove any stale devices associated with the user in the Microsoft Entra admin center. Stale devices are those that are no longer active and can be removed when they haven’t checked in for a specified period. One cause of stale devices is deleting or retiring an Intune device, which may leave behind a record in Microsoft Entra and contribute to reaching the Microsoft Entra device registration limit. To remove stale devices: Go to the Microsoft Entra admin center. Navigate to Microsoft Entra ID > Users. Search for the user using their UPN. Select Devices. This displays a list of registered devices for the user. Devices that are no longer in use can be removed. To increase the device limit for Microsoft Entra registration: Go to the Microsoft Entra admin center. Navigate to Microsoft Entra ID > Devices. Select Device Settings. Locate Maximum number of Devices Per User. Adjust the device limit as needed. iOS Intune device limit reached For iOS, device enrollment may fail with the following error if the device limit has been reached. To check the issue, select 'Report and Email logs' to collect Company Portal logs. If the logs show the below error, it confirms the Intune device limit has been reached. 2025-07-18 12:38:33.427 | utility | 31673 | AlertManager.swift:37 (push(alert:grouping:)) Pushing alert with: grouping = 0 title = Couldn't add your device. message = You have reached the limit of devices you can register. Please contact your company support to increase this number, or review and remove devices that are already registered with this account. into the AlertManager The resolution is the same as Android, refer to the earlier steps for Intune device limit reached on Android. Microsoft Entra device limit reached On iOS devices, Intune enrollment may successfully complete; however, device registration may still result in an error as shown below in the Company Portal app. To collect Intune Company Portal logs, select More > Send logs > Email Logs. When you see the following error message in the Company Portal logs: iOSunderlyingErrorMessage: { "ErrorType": "AuthorizationError", "Message": "User '00000000-0000-0000-0000-000000000000' is not eligible to enroll a device of type 'Ios'. Reason 'DeviceCapReached'.", "TraceId": "00000000-0000-0000-0000-000000000000", "Time": "2025-07-16 14:07:23Z" } To resolve, use the same steps as Android when Microsoft Entra device limit is reached. macOS Intune device limit reached For macOS, device enrollment will fail with the following error when the Intune device limit has been reached. To identify the issue, collect the Company Portal logs by selecting 'Report' and then email the logs. In the logs, when you see the following error, this confirms the Intune device limit has been reached. 2025-07-25 07:39:23.731 | utility | 14262 | AlertManager.swift:37 (push(alert:grouping:)) Pushing alert with: grouping = 0 title = Couldn't add your device. message = You have reached the limit of devices you can register. Please contact your company support to increase this number, or review and remove devices that are already registered with this account. into the AlertManager To resolve, use the same steps as Android when Intune device limit is reached. Microsoft Entra device limit reached For macOS when enrolling into Intune, if the Microsoft Entra device limit has been reached, you’ll notice the following error: In the Company Portal logs, when you see the following error, this confirms the Microsoft Entra device limit has been reached. Description: { "ErrorType": "AuthorizationError", "Message": "User '00000000-0000-0000-0000-000000000000' is not eligible to enroll a device of type 'Mac'. Reason 'DeviceCapReached'.", "TraceId": "00000000-0000-0000-0000-000000000000", "Time": "2025-05-27 05:24:52Z" } To resolve, use the same steps as Android when Microsoft Entra device limit is reached. Windows Intune device limit reached For Windows devices, enrollment will fail with the following error when Intune device limit has been reached: When you see this error, you can check the logs in the event viewer in this path: Source: Microsoft-Windows-DeviceManagement-Enterprise-Diagnostics-Provider/Admin Event ID: 71 MDM Enroll: Failed to receive or parse certificate enroll response. Result: The account has too many devices enrolled to Mobile Device Management (MDM). Delete or unenroll old devices to fix this error. To resolve, use the same steps as Android when Intune device limit is reached. Microsoft Entra device limit reached For Windows, when the Microsoft Entra device limit has been reached, you’ll notice the following error during Intune enrollment: When you see this error, you can check the logs in the event viewer in this path: Windows Device Source: Microsoft-Windows-User Device Registration/Admin Event ID: 304 The get join response operation callback failed with: exit code: Unknown HResult Error code: 0x801c000e Activity Id: a0a15e15-631a-46ab-b0a4-2f540778df7d The server returned: HTTP status: 400 Server response: { "code": "invalid_request", "subcode": "error_directory_quota_exceeded", "message": "User '8b000000-0000-0000-0000-000000000000' is not eligible to enroll a device of type 'Windows'. Reason 'DeviceCapReached'.", "operation": "DeviceJoin", "requestid": "a0000000-0000-0000-0000-000000000000", "time": "2025-05-30 15:33:09Z" } This is the result of the Microsoft Entra device limit reached for the user for Windows platform. To resolve, use the same steps as Android when Microsoft Entra device limit is reached. Device limit reached – Windows Autopilot hybrid join scenario The Microsoft Entra device limit reached error will also occur when changing the primary user in Intune for Windows Autopilot Microsoft Entra hybrid joined devices). In the Autopilot hybrid join scenario there will be two device records in Azure. The Microsoft Entra hybrid join record, and the standard Microsoft Entra join record. Changing the primary user only updates the hybrid joined record in Microsoft Entra, leaving the original user as the owner of the Microsoft Entra join record. The owner entries on the Microsoft Entra join record will impact the device registration limit. Rather than removing the Microsoft Entra join device, which deletes its join state and is not a recommended approach, remove the registered owner on that record. Note: Deploying new devices as Microsoft Entra hybrid join devices isn’t recommended, for more details refer to Microsoft Entra joined vs. Microsoft Entra hybrid joined in cloud-native endpoints: Which option is right for your organization. The following image shows the device state after the Microsoft Entra hybrid joined deployment is completed. User1 enrolled a Microsoft Entra hybrid join device with Intune and Windows Autopilot and the registered user for both the records is ‘user1’. After changing the primary user in Intune to user2, only the Microsoft Entra hybrid joined record is updated for user2. The Microsoft Entra device registration usage for user1 remains unchanged for the Microsoft Entra joined record, both before and after modifying the primary user of the Intune device. This counts toward the Microsoft Entra registration limit for user1. Resolution Before proceeding with the resolution steps for this scenario, it’s important to note the difference between a registered owner and a registered user: Registered owner: A registered owner is the user that cloud joined the device or registered their personal device. The registered owner is set at the time of registration. Registered user: For cloud joined devices and registered personal devices, registered users are set to the same value as registered owners at the time of registration. Remove the registered owner This action can be done using PowerShell and Graph Explorer. Step 1. Check the user's device count in Microsoft Entra ID using Graph Explorer or PowerShell. PowerShell: This query lists the registered devices for the user. Install-Module Microsoft.graph Connect-MGgraph Get-MgUserRegisteredDevice -UserId <userID> Get-MgUserRegisteredOwner -UserId <userId> Sample from PowerShell: Graph Explorer queries: Owned devices for the user GET https://graph.microsoft.com/v1.0/users/{user-id}/OwnedDevices Registered device for the user GET https://graph.microsoft.com/v1.0/users/{user-id}/registeredDevices Sample Graph Explorer output: Only the "ID" in the output is needed to remove the device in next step. { "@odata.context": "******", "@microsoft.graph.tips": "******", "id": "00000000-0000-0000-0000-00000000", "deletedDateTime": null, "accountEnabled": true, "approximateLastSignInDateTime": "******", "complianceExpirationDateTime": null, "createdDateTime": "******", "deviceCategory": null, "deviceId": "******", "deviceMetadata": null, "deviceOwnership": "Company", "deviceVersion": 2, "displayName": "******", "domainName": null, "enrollmentProfileName": null, "enrollmentType": "AzureDomainJoined", "externalSourceName": null, "isCompliant": false, "isManaged": true, "isRooted": false, "managementType": "MDM", "manufacturer": "******", "mdmAppId": "******", "model": "******", "onPremisesLastSyncDateTime": null, "onPremisesSyncEnabled": null, "operatingSystem": "******", "operatingSystemVersion": "******", "physicalIds": [ "******", "******", "******", "******" ], "profileType": "RegisteredDevice" } Step 2. After confirming the user association for the device, remove both the registered owner and user for the Microsoft Entra joined device record to clear the user count toward the pre-defined limit. Graph API query: Replace the 'deviceid' in the following query with the 'id' from the Graph Explorer output from the previous step. Delete Registered Owner DELETE https://graph.microsoft.com/v1.0/devices/{deviceid}/registeredowners/{user-id}/$ref Delete Registered User DELETE https://graph.microsoft.com/v1.0/devices/{deviceid}/registeredusers/{user-id}/$ref This can also be done with PowerShell as below. PowerShell commands In the below commands DeviceID = Microsoft Entra Device ID/ObjectID. It’s important to remove both the registered owner and registered user for the device. Remove registered owner: Remove-mgdeviceregisteredownerDirectoryObjectByRef –DeviceId <DeviceID> -DirectoryObjectId <userID> Sample PowerShell output: Remove registered user: Remove-mgdeviceregistereduserDirectoryObjectByRef –DeviceId <DeviceID> -DirectoryObjectId <userID> Sample PowerShell output: PowerShell or Graph Explorer can also be used to delete the device in other scenarios such as Intune device deletion and Microsoft Entra device ID deletion. Summary Device enrollment can fail when either Intune or Microsoft Entra device limits are reached. These errors can be confusing, however, understanding the difference between Microsoft Entra device registration limits and Intune device enrollment limits makes it easier to sort out and resolve the issue. These issues commonly stem from stale device records, or changing the primary user of a Microsoft Entra hybrid joined device. Resolving them involves removing inactive devices or adjusting device limit policies in the appropriate service. As a best practice, avoid changing the primary user of the Microsoft Entra hybrid joined device and deploy the Windows Autopilot device to new users with a fresh start. Additional information on this topic can be found in the Microsoft Learn docs below: Device limit - Understand Intune and Microsoft Entra device limit restrictions List RegisteredDevices for user - List registeredDevices - Microsoft Graph v1.0 ListOwnedDevices for user - List ownedDevices - Microsoft Graph v1.0 Remove the registered owners for the device - Delete registeredOwners - Microsoft Graph v1.0 Remove the registered user for the device - List registeredUsers - Microsoft Graph v1.0 If you have any questions, leave a comment below or reach out to us on X @IntuneSuppTeam.Using filters and APP conditional launch to control the OS version with Microsoft Intune
By: Wayne Bennett – Sr. Program Manager | Microsoft Intune Microsoft Intune app protection policies (APP) enables organizations to protect corporate data. APPs include conditional launch actions which control access to corporate data if the required device or app conditions aren’t met. Although we’ve documented the steps to selectively wipe app data using conditional launch, this blog expands on the existing information to provide details on how to use filters to require multiple minimum operating system (OS) versions. Background The increase of security improvements and the introduction of new functionality has resulted in more frequent OS updates. Thus, you may want to ensure devices accessing corporate resources have the latest updates installed. In Intune, for enrolled devices, you can use compliance policies to enforce a minimum OS version. Or, regardless of enrollment, you can use a single policy type to enforce minimum OS requirements by configuring APP conditional launch requirements. Then, users won’t be able to access protected resources if the minimum OS requirements aren’t met. How conditional launch and filters work together In APP, you can only configure one minimum OS version in the conditional launch settings but you could create multiple APPs with different minimum OS values. However, because APPs are assigned to user groups, this means a user with multiple devices that are running different OS versions could face conflicting OS requirements when accessing protected resources. To allow multiple APPs with different OS requirements to be targeted to the same user, you can create filters which target the APP to a specific OS version. There are two types of filters for Intune: Managed devices and Managed apps. APP only supports Managed apps filters. Creating filters To use filters with APPs, you must create a filter for each specific OS version you want to target: Navigate to the Microsoft Intune admin center. Select Tenant administration > Filters > Create > Managed apps. On the Basics page, enter a name for the filter which makes it easily identifiable and select the platform you want to target, in this example, iOS/iPadOS. On the Rules page, create a filter for the major OS release you wish target, for example, Property=osVersion(OS version), Operator=StartsWith, Value=18. Optional: You can use the Preview button to check the device, user, and app which match the specified filter. On the Review and create page, save the filter by selecting Create. Repeat these steps to create additional filters for each platform and major OS version you want to target, such as iOS 16 and 17. Create and target APP with a filter Navigate to the Microsoft Intune admin center. Select Apps > App protection policies > Create policy > Choose the platform you want to target with the APP, such as iOS/iPadOS. On the Basics page, enter a name for the policy which makes it easily identifiable. Complete the Apps, Data protection and Access requirements pages with the iOS, Android or Windows app protection policy settings which meet the requirements for your organization. Within the Device conditions section on the Conditional launch page (or Health Checks page for Windows APP), configure the OS minor or patch release you wish to set as the minimum version. For example: Setting=Min OS version Value=18.2.1 Action=Block access/Wipe data/Warn, (as per the action required for your organization). On the Assignments page, use the previously created filter to scope the policy assignment to the correct major OS version. On the Review and create page, save the policy by selecting Create. In the example shown, the filter will target devices running iOS 18 and the APP conditional launch settings will require 18.2.1, ensuring that the APP does not apply to devices running on other major versions of iOS. Create additional APPs for each OS version, for instance: Second policy for iOS 16: Conditional launch, Device conditions, Min OS version=16.7.10, filter, OS version, StartsWith=16. Third policy for iOS 17: Conditional launch, Device conditions, Min OS version=17.7.2, filter OS version, StartsWith=17. Conclusion Using the examples in this blog, you can create multiple APPs that require different minimum OS versions. You can then filter the assignment of these APPs to only apply to each major OS version. As the OS vendors release new minor OS updates or patches, you can also update each APP with the new minimum OS ensuring your organization remains secure. Let us know if you have any questions by leaving a comment on this post or reaching out on X @IntuneSuppTeam.
