Microsoft Defender for Endpoint (MDE) Live Response and Performance Script.
Importance of MDE Live Response and Scripts Live Response is crucial for incident response and forensic investigations. It enables analysts to: Collect evidence remotely. Run diagnostics without interrupting users. Remediate threats in real time. For more information on MDE Live Response visit the below documentation. Investigate entities on devices using live response in Microsoft Defender for Endpoint - Microsoft Defender for Endpoint | Microsoft Learn PowerShell scripts enhance this capability by automating tasks such as: Performance monitoring. Log collection. Configuration validation. This automation improves efficiency, consistency, and accuracy in security operations. For more details on running performance analyzer visit the below link. Performance analyzer for Microsoft Defender Antivirus - Microsoft Defender for Endpoint | Microsoft Learn While performance analyzer is run locally on the system to collect Microsoft Defender Anti-Virus performance details , in this document we are describing on running the performance analyzer from MDE Live Response console. This is a situation where Security administrators do not have access to the servers managed by Infra administrators. Prerequisites Required Roles and Permissions To use Live Response in Microsoft Defender for Endpoint (MDE), specific roles and permissions are necessary. The Security Administrator role, or an equivalent custom role, is typically required to enable Live Response within the portal. Users must possess the “Manage Portal Settings” permission to activate Live Response features. Permissions Needed for Live Response Actions Active Remediation Actions under Security Operations: Take response actions Approve or dismiss pending remediation actions Manage allowed/blocked lists for automation and indicators Unified Role-Based Access Control (URBAC): From 16/02/2025, new customers must use URBAC. Roles are assigned to Microsoft Entra groups. Access must be assigned to device groups for Live Response to function properly. Setup Requirements Enable Live Response: Navigate to Advanced Features in the Defender portal. Only users with the “Manage Portal Settings” permission can enable this feature. Supported Operating System Versions: Windows 10/11 (Version 1909 or later) Windows Server (2012 R2 with KB5005292, 2016 with KB5005292, 2019, 2022, 2025) macOS and Linux (specific minimum versions apply) Actual Script Details and Usage The following PowerShell script records Microsoft Defender performance for 60 seconds and saves the output to a temporary file: # Get the default temp folder for the current user $tempPath = [System.IO.Path]::GetTempPath() $outputFile = Join-Path -Path $tempPath -ChildPath "DefenderTrace.etl" $durationSeconds = 60 try { Write-Host "Starting Microsoft Defender performance recording for $durationSeconds seconds..." Write-Host "Recording will be saved to: $outputFile" # Start performance recording with duration New-MpPerformanceRecording -RecordTo $outputFile -Seconds $durationSeconds Write-Host "Recording completed. Output saved to $outputFile" } catch { Write-Host "Failed to start or complete performance recording: $_" } 🔧 Usage Notes: Run this script in an elevated PowerShell session. Ensure Defender is active, and the system supports performance recording. The output .etl file can be analyzed using performance tools like Windows Performance Analyzer. Steps to Initiate Live Response Session and Run the script. Below are the steps to initiate a Live Response session from Security.Microsoft.com portal. Below screenshot shows that console session is established. Then upload the script file to console library from your local system. Type “Library” to list the files. You can see that script got uploaded to Library. Now you execute the script by “run <file name>” command. Output of the script gets saved in the Library. Run “getfile <path of the file>” to get the file downloaded to your local system download folder. Then you can run Get-MpPerformanceReport command from your local system PowerShell as shown below to generate the report from the output file collected in above steps. Summary and Benefits This document outlines the use of MDE Live Response and PowerShell scripting for performance diagnostics. The provided script helps security teams monitor Defender performance efficiently. Similar scripts can be executed from Live Response console including signature updates , start/stop services etc. These scripts are required as a part of security investigation or MDE performance troubleshooting process. Benefits: Faster incident response through remote diagnostics. Improved visibility into endpoint behaviour. Automation of routine performance checks. Enhanced forensic capabilities with minimal user disruption.Purview Webinars
REGISTER FOR ALL WEBINARS HERE Upcoming Microsoft Purview Webinars JULY 15 (8:00 AM) Microsoft Purview | How to Improve Copilot Responses Using Microsoft Purview Data Lifecycle Management Join our non-technical webinar and hear the unique, real life case study of how a large global energy company successfully implemented Microsoft automated retention and deletion across the entire M365 landscape. You will learn how the company used Microsoft Purview Data Lifecyle Management to achieve a step up in information governance and retention management across a complex matrix organization. Paving the way for the safe introduction of Gen AI tools such as Microsoft Copilot. 2025 Past Recordings JUNE 10 Unlock the Power of Data Security Investigations with Microsoft Purview MAY 8 Data Security - Insider Threats: Are They Real? MAY 7 Data Security - What's New in DLP? MAY 6 What's New in MIP? APR 22 eDiscovery New User Experience and Retirement of Classic MAR 19 Unlocking the Power of Microsoft Purview for ChatGPT Enterprise MAR 18 Inheriting Sensitivity Labels from Shared Files to Teams Meetings MAR 12 Microsoft Purview AMA - Data Security, Compliance, and Governance JAN 8 Microsoft Purview AMA | Blog Post 📺 Subscribe to our Microsoft Security Community YouTube channel for ALL Microsoft Security webinar recordings, and more!Maintain connectivity for essential services with selective network isolation
Network isolation refers to how Microsoft Defender for Endpoint restricts a compromised device’s communication within the network in order to contain threats and prevent lateral movement. But oftentimes when isolating devices, certain critical services like management tools or security solutions need to remain operational. That's why Defender for Endpoint has launched selective isolation exclusions, which allow you to exclude specific devices, processes, IP addresses, or services from unilateral network isolation actions. This allows essential functions (e.g., remote remediation or monitoring) to continue in the event of a breach, while limiting broader network exposure. Isolation Modes There are two modes available: Full isolation: In this mode, the device is completely isolated from the network, and no exceptions are allowed. All traffic is blocked, except for essential communications with the Defender agent. Exclusions cannot be applied in full isolation mode. This is the most secure option, suitable for scenarios where a high level of containment is necessary. [New] Selective isolation: Selective isolation allows administrators to apply exclusions to ensure that critical tools and network communications can still function, even while maintaining the device’s isolated state. ⚠️ Note: Any exclusion weakens device isolation and increases security risks. To minimize risk, configure exclusions only when absolutely necessary. Regularly review and update exclusions to align with security policies. To get started, read the isolation exclusions documentation. Learn more To learn more about Microsoft Security solutions, visit our website. Bookmark the Security blog to keep up with our expert coverage on security matters. Also, follow us on LinkedIn (Microsoft Security) and X (@MSFTSecurity) for the latest news and updates on cybersecurity.
Set Up Endpoint DLP Evidence Collection on your Azure Blob Storage
Endpoint Data Loss Prevention (Endpoint DLP) is part of the Microsoft Purview Data Loss Prevention (DLP) suite of features you can use to discover and protect sensitive items across Microsoft 365 services. Microsoft Endpoint DLP allows you to detect and protect sensitive content across onboarded Windows 10, Windows 11 and macOS devices. Learn more about all of Microsoft's DLP offerings. Before you start setting up the storage, you should review Get started with collecting files that match data loss prevention policies from devices | Microsoft Learn to understand the licensing, permissions, device onboarding and your requirements. Prerequisites Before you begin, ensure the following prerequisites are met: You have an active Azure subscription. You have the necessary permissions to create and configure resources in Azure. You have setup endpoint Data Loss Prevention policy on your devices Configure the Azure Blob Storage You can follow these steps to create an Azure Blob Storage using the Azure portal. For other methods refer to Create a storage account - Azure Storage | Microsoft Learn Sign in to the Azure Storage Accounts with your account credentials. Click on + Create On the Basics tab, provide the essential information for your storage account. After you complete the Basics tab, you can choose to further customize your new storage account, or you accept the default options and proceed. Learn more about azure storage account properties Once you have provided all the information click on the Networking tab. In network access, select Enable public access from all networks while creating the storage account. Click on Review + create to validate the settings. Once the validation passes, click on Create to create the storage Wait for deployment of the resource to be completed and then click on Go to resource. Once the newly created Blob Storage is opened, on the left panel click on Data Storage -> Containers Click on + Containers. Provide the name and other details and then click on Create Once your container is successfully created, click on it. Assign relevant permissions to the Azure Blob Storage Once the container is created, using Microsoft Entra authorization, you must configure two sets of permissions (role groups) on it: One for the administrators and investigators so they can view and manage evidence One for users who need to upload items to Azure from their devices Best practice is to enforce least privilege for all users, regardless of role. By enforcing least privilege, you ensure that user permissions are limited to only those permissions necessary for their role. We will use portal to create these custom roles. Learn more about custom roles in Azure RBAC Open the container and in the left panel click on Access Control (IAM) Click on the Roles tab. It will open a list of all available roles. Open context menu of Owner role using ellipsis button (…) and click on Clone. Now you can create a custom role. Click on Start from scratch. We have to create two new custom roles. Based on the role you are creating enter basic details like name and description and then click on JSON tab. JSON tab gives you the details of the custom role including the permissions added to that role. For owner role JSON looks like this: Now edit these permissions and replace them with permissions required based on the role: Investigator Role: Copy the permissions available at Permissions on Azure blob for administrators and investigators and paste it in the JSON section. User Role: Copy the permissions available at Permissions on Azure blob for usersand paste it in the JSON section. Once you have created these two new roles, we will assign these roles to relevant users. Click on Role Assignments tab, then on Add + and on Add role assignment. Search for the role and click on it. Then click on Members tab Click on + Select Members. Add the users or user groups you want to add for that role and click on Select Investigator role – Assign this role to users who are administrators and investigators so they can view and manage evidence User role – Assign this role to users who will be under the scope of the DLP policy and from whose devices items will be uploaded to the storage Once you have added the users click on Review+Assign to save the changes. Now we can add this storage to DLP policy. For more information on configuring the Azure Blob Storage access, refer to these articles: How to authorize access to blob data in the Azure portal Assign share-level permissions. Configure storage in your DLP policy Once you have configured the required permissions on the Azure Blob Storage, we will add the storage to DLP endpoint settings. Learn more about configuring DLP policy Open the storage you want to use. In left panel click on Data Storage -> Containers. Then select the container you want to add to DLP settings. Click on the Context Menu (… button) and then Container Properties. Copy the URL Open the Data Loss Prevention Settings. Click on Endpoint Settings and then on Setup evidence collection for file activities on devices. Select Customer Managed Storage option and then click on Add Storage Give the storage name and copy the container URL we copied. Then click on Save. Storage will be added to the list. Storage will be added to the list for use in the policy configuration. You can add up to 10 URLs Now open the DLP endpoint policy configuration for which you want to collect the evidence. Configure your policy using these settings: Make sure that Devices is selected in the location. In Incident reports, toggle Send an alert to admins when a rule match occurs to On. In Incident reports, select Collect original file as evidence for all selected file activities on Endpoint. Select the storage account you want to collect the evidence in for that rule using the dropdown menu. The dropdown menu shows the list of storages configured in the endpoint DLP settings. Select the activities for which you want to copy matched items to Azure storage Save the changes Please reach out to the support team if you face any issues. We hope this guide is helpful and we look forward to your feedback. Thank you, Microsoft Purview Data Loss Prevention Team
Looking to be certified
Good morning everyone, I used to be an Altiris administrator and was briefly an SCCM administrator 10 years ago. I was self-employed for a long time and I’m trying to get back into the tech field. More particularly, I want to get back into operating system and software deployment and packaging. Do you guys have any recommendations on how to achieve this? I’ve been looking for courses or boot camps that have a certification test at the end of it to no avail. I noticed that Microsoft has some training classes, but I wasn’t sure how far that would get me. Thank you!
GIA - 2.0 - Get Intune Assignments
GIA - Get Intune Assignments Hello everyone I just released a new version from my App. https://github.com/sibranda/GetIntuneAssignments/releases/tag/v2.0 It's a C#.NET application developed for Intune to query MS Graph Information from Intune Assignments who target the Azure Ad Groups. You can export the data to CSV file if you wish. In this new version you can get information from the following types of assignments: Adm Templates; Applications; App Config Policies; Autopilot Configurations (new on 2.0); App Protection; Conditional Access; Compliance Policies; Configuration Profiles; Settings Catalog; Endpoint Security Policies; Enrollment Restrictions (new on 2.0); iOS App Provisioning (new on 2.0); Policy Sets; PowerShell Scripts; Proactive Remediations (new on 2.0). All this from a Graphic Interface with just a few clicks. https://github.com/sibranda/GetIntuneAssignments/releases/tag/v2.0 Please send me any feedback you want. This can help me to fix bugs and make better solutions to help everyone.
Powershell Script behaviour - User Context
I have an issue with a specific application that requires each user logon to have registration data for the app in their current user key location. The issue I have is that the system is in KIOSK mode and therefore only applications that are whitelisted are allowed to run. If I whitelist the powershell application I can successfully run the script adding the required values to the registry. In doing this however it presents a tile on the KIOSK setup. Question! How do I allow the use of powershell without presenting a tile? To clarify this doesn't appear to work using the scripts facility on Intune endpoint manager setting the script to user context mode. If I review the AppLocker log following an attempt I can see powershell is blocked. Any assistance with this would be much appreciated. Regards, Jon Mason
