Existing required application deployments policy is not sent to devices
I have couple hundred applications in SCCM/MCM that are set to required and whenever there is a new device is built, all these required applications automatically get installed. I am on 2503 and 5 days ago i started seeing this issue. But if modify that deployment with current date and time then the application gets deployed right away if i run Application Deployment evaluation cycle. I also tested by deleting the existing deployment and created a new required deployment and run Application Deployment evaluation cycle then the application installs right away. The problem seems like the Primary server is not sending the policy to the client for existing deployments. The application compliance that we see for every deployment under Monitoring for all the devices moved to Error with Success. Not sure why this is happening. All these changes i noticed in the last one week. A week ago all these Already Compliant and Success status device count is under Success tab. Let me know if you have any suggestions.
Can't find and delete an antivirus exclusion made in MECM.
In the Microsoft Endpoint Configuration Manager current brunch I've added some of the detected malware to exclusions list via right-click in the section "Monitoring-Security-Endpoint protection status - Malware detected" and "Allow this threat". They were excluded for all the computers in a collection. How and where to find this exclusions and delete them? They are appeared on the client computers but not in the MECM Antimalware policies.Unified update platform (UUP) FAQ's
After a month of UUP update release, sharing best practices based on our field and feedback through multiple channels. 1. Will UUP patch work for CB 2111 and below? Our pre-req is Configuration Manager Version 2203 and above as per our release documents. For Configuration Manager Version 2111 (Lesser than this are unsupported now) to patch UUP updates for windows 11 22H2 seamlessly, enable delta download setting using client settings in ConfigMgr. When this option is set, delta download is used for all Windows update installation files, not just express installation files. 2. Please be sure to select the appropriate update classifications in your ADRs. If you have ADRs configured to auto-approve Security Updates, be sure to specify the “Security Updates” classification in your ADR settings. If you would like to take advantage of all the great features of UUP and utilize UUP feature updates to upgrade endpoint clients to Windows 11 22H2, be sure to include the “Upgrades” classification in your ADRs. This will ensure that as endpoint clients go through the OS upgrade they will receive the latest security updates as part of the upgrade and will only need to reboot once. If you do not want to utilize UUP feature updates to upgrade endpoint clients right now, you will want to exclude the “Upgrades” classification from your ADRs. Note: The feature updates will be released every month but there will be sharing of content for the old files and the new content should be only a few hundred MBs between the month releases. See Question 9 for more details on deduplication. 3. ConfigMgr + Adaptiva integrated solutions Adaptiva has released a patch for its customers to support the UUP. The public documentation can be found here: https://adaptiva.com/blog/using-unified-update-platform-with-adaptiva-onesite. Note that Adaptiva has asked customers not to enable delta download from the client settings and this is our recommendation from ConfigMgr 2203+ onwards only (which is our recommended version as well but as mentioned before for UUP to work with ConfigMgr 2111 there is a requirement to enable delta download from client settings.) 4. ConfigMgr console on Windows Server 2012 R2 cannot download the UUP Quality update fails to verify cert signature PatchDownloader.log Verifying file trust C:\Users\admin\AppData\Local\Temp\2\CAB291B.tmp.wim Software Updates Patch Downloader Authentication of file C:\Users\admin\AppData\Local\Temp\2\CAB291B.tmp.wim failed, error 0x800b0004 Software Updates Patch Downloader Attempting to delete 0 byte tmp files from previous downloads Software Updates Patch Downloader ERROR: DownloadUpdateContent() failed with hr=0x80073633 Software Updates Patch Downloader Workaround: Patch the Windows Server 2012 R2 with 2023 4B (April CU) which then fixes this issue. 5. ConfigMgr Patchdownloader component may fail to verify (*.psf files) if the UUP patches were synched before ConfigMgr 2111 version. The issue will persist even if ConfigMgr version is upgraded to ConfigMgr 2111+ if the updates were synched before ConfigMgr was on a lesser version than version 2111. Sample error in PatchDownloader.log Verifying file trust C:\WINDOWS\TEMP\CAB6062.tmp.psf Software Updates Patch Downloader Authentication of file C:\WINDOWS\TEMP\CAB6062.tmp.psf failed, error 0x800b0004 Software Updates Patch Downloader Attempting to delete 0 byte tmp files from previous downloads Software Updates Patch Downloader ERROR: DownloadUpdateContent() failed with hr=0x80073633 Software Updates Patch Downloader The below SQL query will help you identify the issue. -- Sample check for 2023-04 Cumulative Update for Windows 11 Version 22H2 for x64-based Systems (KB5025239). -- Replace the unique update id below if you are searching for a different UUP update IF EXISTS( select all SMS_CIContentFiles.CI_UniqueID,SMS_CIContentFiles.Content_ID,SMS_CIContentFiles.FileName,SMS_CIContentFiles.FileSize, SMS_CIContentFiles.IsSigned,SMS_CIContentFiles.SecuredTypeID,SMS_CIContentFiles.SourceURL from vSMS_CIContentFiles AS SMS_CIContentFiles WHERE SMS_CIContentFiles.CI_UniqueID='3157dbaf-04f5-49fc-baef-300bbd6d121a' AND FileName like '%.psf' and isSigned= 1 ) PRINT 'UUP Updates likely synched before upgrading to 2111. This will need correction, Please call Microsoft support to correct this.' ELSE PRINT 'You are not likely affected by the UUP PSF update signing issue' If you get the output of the above query as 'UUP Updates likely synched before upgrading to 2111. This will need correction, please call Microsoft support to correct this.' then likely you are affected and open a support case with Microsoft to correct the issue. 6. UUP updates installed as a part of OSD TS in "Install Software Updates" step (Fixed 2309 or later) There is a known issue that is currently investigated. The issue is the Delta Download component of CCMEXEC not starting on time and the updates timeout on the first scan, later scans are not impacted. Workaround: Add a restart step in between two install software updates steps. This will allow UUP updates to be successfully downloaded and installed in the second attempt. Resolution: Upgrade to CB 2309 and upgrade the client. This issue is addressed. 7. Does offline servicing work with UUP updates? No. Offline servicing images with UUP QU updates from the ConfigMgr console is not supported. 8. Are Delivery Optimization (DO) and Delta Download (DD) components different ? What is ConfigMgr dependency on DO? Delivery Optimization is a Windows technology to deliver content in a smart way reducing internet bandwidth owned by the Windows team and Delta Download is a component which is an http listener for requests owned by the ConfigMgr team. Delivery Optimization is a peer-to-peer distribution technology available in Windows 11 and Windows 10 that allows devices to share content, such as updates, that the devices have downloaded from Microsoft over the internet. DO is a part of the Windows OS. Delta Download is a http listener and is a component of ConfigMgr. ConfigMgr requires the DO client as it invokes the Delta download listener to download the content (as we configure the alternate content location URL in WUA policy to point to Delta Download Listener URL). The Invocation flow is WUA (Windows Update Agent) -> DO (Delivery Optimization) -> DD (Delta Download). Hence even if we don't enable DO, ConfigMgr would automatically enable DO by setting these two policies. This is visible in the UpdateDOGPO.log SetDOGPOSettings: Set Windows DO group policy to DOGroupId = DeliveryMode = group Customers should not create any GPO settings to disable these policies OR edit the registry to disable the DOSVC service or from services console. 9. Update Supersedence changing to 6 months default for new installs. How does update supersedence affect UUP scenarios? Refer the blog for the announcement details for this change. The default for expiring updates which are superseded will only change for the new installations and the existing ones will not be altered from whatever the current setting is. 10. Does ConfigMgr have deduplication of files at source and distribution points? Deduplication at the source in ConfigMgr : When PatchDownloader component downloads a file it checks if the file exists in the same share and creates a hard link for the already existing file instead of re-downloading it. Scenario 1 If the files/folders for previous UUP update source package are on the same volume but different share name, customers don't go into creating hard link path at all. Scenario 2(a) If the Package path has a common share \\machine\share but different folders inside it (which is the normal case) like \\machine\share\jan and \\machine\share\feb we go to the hard link and create the hard link for the file with the Patchdownloader.log entry Content already downloaded. Created link for ContentID Scenario 2(b) Same scenario as 2(a) but the PatchDownloader here finds the same file present in a different share first apart from being present on the same share. Here the PatchDownloader doesn't go deep and check if the file is also present on the same share and fails to create the hard link. But here it doesn't download from internet again but copies the file from the other share to this share. Log entries fail to create hard link with error 17 (which is it thinks these are different drives). Could not create hard link: \\MachineNetbios\UpdatesPackage\2302_Win11_21H2_UUP\b1e9d019-7dec-4eee-b7e4-9e8eae99d89b.1\19222DDC6156FBE5570C3A6DDF69759662F93AEE_FeatureOnDemand.wim -> \\ MachineNetbios\22-11-UUPWin11\bcb528ff-85c2-4372-8b91-20bd0c7fa1e4\19222DDC6156FBE5570C3A6DDF69759662F93AEE_FeatureOnDemand.wim. LastErr=17 Summary It is recommended to have a single share for all the UUP monthly packages \\machine\UUP and then creating folders inside it for each months. for eg.. \\machine\share\jan and \\machine\share\feb . In this case ConfigMgr will create hard links instead of downloading the actual files again. Note If you actually check the properties of the folder it will still show the size of the actual file and not hard link. Use DU.exe from sysinternals suite to find the actual size of a folder. E:\UpdatesPackage\2302_Win11_21H2_UUP>E:\DU\du.exe . DU v1.62 - Directory disk usage reporter Copyright (C) 2005-2018 Mark Russinovich Sysinternals - www.sysinternals.com Files: 14 Directories: 2 Size: 9,675,198,236 bytes Size on disk: 9,675,227,136 bytes Note To find all the hard link references to a file use the fsutil command. fsutil harlink list <full_file_path> 11. Why does ConfigMgr UUP On-Prem download a 3-5GB wim when I want to install a very small FOD/LP package? This is an issue with the size attribute on the file as we don't download the full file for FOD/LP but only the needed byte ranges. Since we download the needed byte ranges only, the size that gets displayed for the file is the cumulative size of the file till that range. Meaning if the small FOD package is around 3035627519 of the byte range in the file, we will display the size of the file as around 2.82 GB. While in actuality we only downloaded the file ranges between 3034578944-3035627519 for the 1 MB FOD package. To confirm the actual size of the file on disk you can check the properties of the file and verify the "Size on disk". 12. Deduplication at the distribution points in ConfigMgr : Distribution Points in ConfigMgr are already designed to have a SIS (Single instance storage) in the form of Content Library. So we store any file only once no matter how many packages it is present in. More on ConfigMgr Content Library design here . For more details ref the actual windows blog and Configuration blog. Thank you, The Configuration Manager team
Using REST API to get / set device variables
Hi, I'm trying to set a couple of variables against a machine name, through using the REST API. These are the variables that are set that you can see in the console if you right click properties on a device and go to the 'Variables' tab. These are handy because they can later be referenced during Task Sequences / OSD. I just can't figure out how to do it with the REST API. I have no issues doing it with the powershell module using the 'New-CMDeviceVariable' command, but my solution i'm building at the moment requires the solution to be done with rest api, not with ps modules... I can connect to REST API using powershell using commands such as the below. This all works fine. $ConfigMgrServerURL = "https://SCCMserver.domain.local" $MachineName = "MachineName1" # Following command is a sample GET request, which works. (Invoke-RestMethod -Method Get -Uri "$ConfigMgrServerURL/AdminService/wmi/SMS_R_System?`$filter=Name eq '$MachineName'" -Credential $Credential) #I can also fetch "Custom Properties" via this command (Invoke-RestMethod -Method Get -Uri "$ConfigMgrServerURL/AdminService/v1.0/Device($ResourceID)/AdminService.GetExtensionData" -Credential $Credential) Now i just can't see where i can go to set a variable on the machine. Does anyone have any ideas ? Thanks!
Win11 24H2 slow to restart TS task execution following reboot task in bare metal OS deployment
When comparing OS deployment bare metal task sequence times between Windows 11 24H2 and Windows 10 22H2 I could see that 24H2 was considerably slower even though the task sequences were almost identical other than the OS being laid down on the device. I did a timing comparison and noticed two things in particularly that were taking considerably longer on the 24H2 device: 1) reboot tasks 2) time to finish up the task sequence work after the last step. For reboot tasks, I can see that the delay is between these two events in the SMSTS.log log: Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace and Policy verification done within the OSDSetupHook component. On the Windows 10 device the time between those log entries was 1 second, but on Windows 11 24H2 those log entries vary, but it's usually around 2 minutes. At the end of the task sequence, after executing the last task, following The task execution engine successfully completed the current task sequence step smsts.log entry to when the smsts.log stops being written to, it takes 14 seconds for the Windows 10 device, but it takes 4:29 seconds for the Windows 11 device. The delays are similar, between these two events in SMSTS.log (see attached screen shot): End Task Sequence policy cleanup and Policy evaluation initiated within the TSManager component. Any reason policy work should take considerably longer on Win11 24H2? Any suggestions on where I can look to see as to why it's taking such a longer time to deal with policy work in 24H2? Is this a Win11 24H2 issue, a ConfigMan issue, or ConfigMan configuration issue? I am welcome to entertain any thoughts or suggestions folks have. Anyone else seeing this issue in their environment? Environment details: CM 2503 (5.0.9135.1000) without KB33177653 or KB34503790 installed. Windows 11 = 24H2 customized reference image built from August 2025 ISO. ADK = 21H2 (10.1.22000.1).
Windows/Defender Updates not deployed to SCCM server (all clients work fine!)
After battling for a few weeks with this it finally occurred to me to reach out for help, and I found this forum. So here goes… I have a relatively small environment with Windows Updates managed by SCCM. Currently, all clients are receiving updates as expected, the only client that isn’t is the Windows Server that’s hosting SCCM itself. Should I be configuring the winhttp proxy settings on that one server to point to our proxy (I have tried it and it didn’t seem to make a difference)? Without the winhttp proxy set, when I check the Windows update log, it seems to be trying the automatic proxy settings and quite rightly failing. It runs out of options and tries the user proxy as a last resort. I have checked that I can reach the URL configured in the Windows Update settings in Group Policy from the SCCM server and it works fine. Is there something I need to do differently with the SCCM server versus all the other clients? The SCCM client is installed on the SCCM server and is reporting healthy status with expected policies applied like all other managed clients in the estate. The SCCM server is in the same boundary as other servers that are receiving updates. SCCM 2503 running on Windows Server 2019. WSUS is running on the same server. The Software Update Point is configured with proxy settings. Thanks in advance!!Re-Join SCCM Client to Intune for Co-Managed join Type
Hello, I have been using SCCM for a long time, I have it is setup for Co-management, and all my workloads are moved over to Intune. I have a few clients that for one reason or other have not been added to Intune. I can get them onboarded, but the join type always ends up Intune. I am trying to find out the correct recipe to reenroll an SCCM client to Intune. I have tried uninstalling the SCCM client and reinstalling. I have tried removing registry keys for Intune to ensure it joins again. I have used DSREGCMD to leave and join back. I have completely removed from Domain and deleted from Intune. I have tried combinations of all of these things together. I have yet to come up with a specific order to do them in. I still think there is some remnant that is preventing a rejoin. Does anyone have details that help me to get systems to rejoin via SCCM? Some may say what is the difference. The difference is there are tools that are not present if the Join type is incorrect. Best regards and thanks.
How to determine what a Package ID is associated with
We have hundreds of packages, applications, software update packages, driver packages, OS images, etc. There are times I only have a package ID and I need to determine what it is. A royal pain to manually search each one of those categories in the console. Anyone have a Powershell script to find what the package ID is associated with?
