Part 1: Cost Optimisation In The Cloud – Practical Design Steps For Architects and Developers
Published Jul 17 2022 04:46 PM 34.1K Views

Cost. I have been fortunate to work for and help migrate one of Australia's leading websites ( into the cloud and have worked for both large public cloud vendors. I have seen the really good, and the not so good when it comes to architecture.

Cloud and cost. It can be quite a polarising topic. Do it right, and you can run super lean, drive down the cost to serve and ride the cloud innovation train. But inversely do it wrong, treat public cloud like a datacentre then your costs could be significantly larger than on-premises.

In this multi-part blog series, I pass on my learnings (in a cloud agnostic way) and if you read(thank-you) and walk away with a meaningful cost-saving idea that you can actually execute in your environment, I’ll personally be exceptionally happy.

If you have found this post, I am going to assume you are a builder and resonate with the developer, architect persona.
It is you who I want to talk to, those who are constructing the "Lego" blocks or architecture, you have a great deal of influence in the efficiency of one's architecture.

Just like a car has an economy value, there are often tradeoffs. Have a low liters per (l/100km - high MPG for my non-Australian friends), it often goes hand in hand with low performance. A better analogy is stickers on an appliance for energy efficiency


How can we increase the efficiency of their architecture, without compromising other facets such as reliability, performance and operational overhead.

This is what the aim of the game is

There is a lot to cover, so in this multi-part blog series I am going to cover quite a lot in a hurry, many different domains and the objective here is to give you things to take away, and if you read this series and come away with one or two meaningful cost-saving ideas that you can actually execute in your environment, I'll personally be exceptionally happy that you have driven cost out of your environment.

Yes, you should be spending less.

In this multi-part series, I we're going to cover three main domains:


  1. Operational optimization,
  2. Infrastructure optimization (Part 2)
  3. Architectural optimizations (Part 3 - with a demo)


With such a broad range of optimisations, hopefully something you read here will resonate with you. The idea is to show you the money. I want to show you where the opportunities for savings exist

Public cloud is full of new toys for us builders, which is amazing (but it can be daunting). New levers for all of us and with the hyperscale providers releasing north of 2000 (5.x per day) updates per day, we all need to pay attention and climb this cloud maturity curve.

You should find those cost savings and invest in them, but the idea is to show you where you can find the money.
I want to make this post easy to consume, because math and public cloud can be complex at times, as services may have multiple pricing dimensions.

My Disclaimer
In this post I will be using Microsoft Azure as my cloud platform of choice, but the principles apply to many of the major hyper scalers (Amazon Webservices and Google Cloud Platform).
I will be using the Microsoft Azure region "Australia-East (Sydney)" because this is the region I most often use, and pricing will be in USD. Apply your own local region pricing, but the concepts will be the same and the percentage savings will likely be almost exactly the same, but do remember, public cloud costs are often based on the cost of doing business in a specific geography.
Lastly, prices are a moving target. This post is accurate as of April 2022.


Cloud - A new dimension
When we look through the lens of public cloud it has brought us all a new dimension of flexibility with so many more building blocks. How are you constructing them?



When we as builders talk about architecture, we will often architect around a few dimensions, some more important than others, depending on your requirements.

Commonly we will architect for availability, for performance, for security for function, but I would like to propose a new a new domain for architecture, and that is economy.

When you're building your systems, you need to look at the economy of your architecture because today in 2022, you have a great deal of control over it. New frameworks, new tools, new technologies, new hosting platforms, new new new.
What I mean by economy of architecture is as simple as this. The same or better outcome for a lower cost.

I will show you how we can actually do this. I'm talking about the ability to trial and change the way a system is built during its own lifetime.

As architects, developers, builders we need to move away from this model of heavy upfront design or some finger in the air predictions of what capacities a solution needs.

But instead, embrace the idea of radical change during and application lifecycle funded by cost savings.
Yes, there are degrees of which you can do this depending on whether you built the system yourself or you're using a COTS (Commercial-Off-The-Shelf-Software). But I will walk through options that you can apply to your existing stacks.


How Are You Keeping Score?
Even with COTS, there are options. Have you noticed the appearance of new Lego blocks in the form of updates? Do you have a mechanism in place to be kept aware of updates? If you do, then that's great, but if you don't, let me share with you how I do and have done this in the past.

Here are two mechanisms I have used for both Azure (Into Microsoft Teams) and Amazon Web Services (Into Amazon Chime via a Python Lambda Function) but you could easily integrate to SLACK, email and beyond. How easy is Microsoft Teams? Regardless of what you are using, with serverless compute (Azure Functions & AWS Lambda) and beyond, I am certain there will be a means to get these messages to your chosen platform. 


Microsoft Teams has a built in RSS feed parser






import boto3
import feedparser
import json
import decimal
import requests
import os
import time
from boto3.dynamodb.conditions import Key, Attr
from botocore.exceptions import ClientError
# Helper class to convert a DynamoDB item to JSON.
class DecimalEncoder(json.JSONEncoder):
    def default(self, o):
        if isinstance(o, decimal.Decimal):
            if o % 1 > 0:
                return float(o)
                return int(o)
        return super(DecimalEncoder, self).default(o)
def process_entry(RSSEntry, table, webhook_url):
        print 'processing entry: ' + RSSEntry['id']
        get_response = table.get_item(
                'entryID': RSSEntry['id']
    except ClientError as e:
            result = get_response['Item']
            print 'key found ' + RSSEntry['id'] + ' No further action'
        except KeyError:
            print 'no key found, creating entry'
            write_entry_to_hook(RSSEntry, webhook_url)
            put_response = table.put_item(
                    'entryID': RSSEntry['id']
            print 'writing entry to dynamo: ' + RSSEntry['id'] + ' ' + RSSEntry['title']
def write_entry_to_hook(RSSEntry, webhook_url):
    print 'writing to webhook: ' + RSSEntry['id']
    hook_data = {'Content': RSSEntry['title'] + ' ' + RSSEntry['link']}
    print hook_data
    url_response =, data=json.dumps(hook_data), headers={'Content-Type': 'application/json'})
    print url_response
def lambda_handler(event, context):
    webhook_url = os.environ['webhook_url']
    rss_url = os.environ['rss_url']
    dynamodb = boto3.resource("dynamodb", region_name='ap-southeast-2')
    table = dynamodb.Table('WhatsNewFeed')
    d = feedparser.parse(rss_url)
    for x in d['entries']:
    #entryID = d['entries'][0]['id']
lambda_handler('test', 'test')






The Basics
Show me the money I say. I will show you the money, and as a bit of a teaser here are some of the percentage savings you will be able to make with various optimisations in this and coming posts.

  • 14% faster
  • Up to 72% cheaper
  • 22% cheaper
  • 33% cheaper
  • 87% reduction in OPEX costs 
  • Up to 90% cheaper 

I am not talking about 1 or 2%’ers, these are sizable chunks you can remove from your bill.

I don’t want to frame this as a basic post, again I am about the builders. but then again there is the obvious stuff. This is the ‘Do Not Pass Go, Do Not Collect 200 Dollars' advice I am talking about fundamentals in cloud and also wider to IT and Software Development

You can't improve what you can't measure. So, I ask you all, do you know what your per transaction cost is?
We are talking fundamentals in cloud here.

What is your per transaction cost? Do you know what cost to serve is?

If you do, well done. But if you don't then how can you improve?


David Rothwell Quote: “If you can't measure it, you can't improve it” –  Peter Drucker.”


Measuring The Cost To Serve
Here is the first piece of wisdom. I will give you three different approaches:


  • Beginner
    • Simply do it by hand. Sit, down with Cost Analytics/Explorer and figure out your transaction rates and do some rough calculations and either be pleasantly surprised or really shocked depending on what comes back you.
  • Intermediate
  • Advanced

When you have this information, you can ask the question: What's my average transaction flow versus my average infrastructure cost? Then you can put it up in the corner and say, "hey developers, we need to optimise"

This becomes your measure, and you need to make this relevant to your business stakeholders.

Managing your costs on Kubernetes
Do you have a cost dashboard? -


Operational Optimisation
How are you paying for public cloud? Using a credit card in a PAYG (Pay As You Go) model might be great to get you started, but for both Microsoft Azure and Amazon Web Services it can be an expesive way to pay.

I am going to list a few bullet points for you to investigate:



You need to move away from paying on demand because this is the most expensive way to leverage public cloud. These savings can range from 15% through to 90% in comparison to on-demand. Typically, discounts apply either for commitment, giving cloud providers certainty or in the case of SPOT, your ability to leverage idle resources.


'Reserved Instances' and 'Savings Plans', whilst not groundbreaking, they allow you to minimise the cost of traditional architectures. My next piece of wisdom is to have a 'Reserved Instance / Savings Plan' % target.


Some of the best organisations I have seen in the past have had up to 80% of their IaaS resources covered by 'Reserved Instances / Savings Plans'. If you don’t have a target, I suggest you look into this.

But before you make a purchase understand your workload. Understand the ebbs and flows of what is baseline load.
The rule of thumb is to assess a workload for 3 months, during that time right size accordingly.

Leverage Azure Monitor / Amazon CloudWatch with a combination of Azure Advisor / AWS Trusted Advisor. Tune your application.


Optimise The Humans - High Value vs. Low Value
Operational optimization. This is an interesting one because, how much time does one really think about one's labor cost. You hire people, they do 'stuff' for you I pay them they come in. The thing is, cloud professionals cost a lot of money


To prove my point, I did a bit of an international investigation. What does it cost for a DBA (Database Administrator) per hour converted to US dollars around the world?


Country Cost Per Hour (USD)
USA $65
Australia $55
United Kingdom $49
Japan $79
Germany $61
Brazi $75
Source : - April 2022

This is just the median DBA and none of us in here would ever work with just a median DBA, so we have established that people have a cost. But let's think about what the actual meaning of this cost.

Let's look through the lens of something DBA's do so often, a minor database engine upgrade. This is important as we should be upgrading our databases on a regular basis (security, features, performance).

Let's also consider Azure MySQL vs. running a database engine on IaaS.


Self-Managed (IaaS) Azure MySQL
Backup primary Verify update window
Backup secondary Create a change record
Backup server OS Verify success in staging
Assemble upgrade binaries Verify success in production
Create a change record 1 Hour
Create rollback plan  
Rehearse in development  
Run against staging  
Run against production standy  
Run in production  
8 Hours Minimum  
What's the administrative effort of a minor database engine upgrade?


Managed services, whilst on paper may be more expensive, the administrative cost of performing undifferentiated heavy lifting is a far greater cost. I am saving time and I am going to receive logs and an audit trail that I can attach it my change record for auditability.

You may say to me, well Shane we’re going spend that money anyway. These people are not going away.
I would say that's great, but you could invest that particular chunk of time into something else of greater business value like maybe tuning your database (query plans, index optimization). This is a better use of a DBA time.

And with that, stay tuned to part 2 where we get real.

Public cloud brings a multitude of opportunities to builders and architects. Are you looking for the pots of gold? They are there. Public cloud provides you a raft of new levers that you can pull and twist to architect for the new world.

Climb the cloud maturity curve and achieve the same or better outcome at a lower cost.
Architectures can evolve, but it needs to make sense. What is the cost to change?

Join me in part 2 as we get deeper into Infrastructure optimisations you can make.

Shane Baldacchino

Version history
Last update:
‎Aug 19 2023 03:13 PM
Updated by: