What do I do if my acer laptop is stuck on the loading screen?

Boot into safe mode and run a troubleshooting fix.

Running a System File Check (SFC) is a useful step if you are going to fix Acer loading screen stuck issues. This process scans your Windows system files for corruption or missing files and repairs them automatically, which can resolve many boot-related problems.

How to run a System File Check to fix Acer loading screen stuck

1. Access the Command Prompt with Administrator Rights

• Press Windows key + X and select Command Prompt (Admin) or Windows PowerShell (Admin).
• If prompted by User Account Control, click Yes to grant admin permissions.

2. Run the System File Checker

In the Command Prompt window, type the following command:

sfc /scannow

• Press Enter.
• The System File Checker will now start scanning your system files. This process may take several minutes.

3. Wait for the Scan to Complete

• Do not close the Command Prompt window until the verification reaches 100%.
• If any corrupted or missing files are found, Windows will automatically repair them.

4. Restart Your Laptop to fix Acer loading screen stuck

• After the scan and repairs are complete, restart your Acer laptop.
• Check if the issue with the loading screen persists.

Booting in Safe Mode can be a helpful troubleshooting step when dealing with issues like the Acer loading screen getting stuck. Here's how it can help.

When your Acer's loading screen gets stuck, it can be frustrating, especially if you're trying to access your PC for work or personal reasons. One potential solution to fix Acer loading screen stuck is to boot your computer in Safe Mode. Safe Mode is a diagnostic mode that allows your computer to boot with a minimal set of drivers and services, which can help you identify and potentially fix the issue causing the loading screen to get stuck.

Here's how to boot in Safe Mode to possibly fix Acer loading screen stuck:

1. Restart your computer.

2. As the Acer logo appears, press the F8 key repeatedly. This should bring up the Advanced Boot Options menu.

3. Use the arrow keys to select Safe Mode and press Enter. Your computer will boot in Safe Mode.

4. Once you're in Safe Mode, try booting up normally. If the loading screen doesn't get stuck, you may have successfully identified and bypassed the issue.

5. If the issue persists in Safe Mode, try updating your system's drivers. Outdated drivers can sometimes cause issues like a stuck loading screen.

6. If updating drivers doesn't work, you might need to perform a System Restore to a point before the issue began. This can help revert your system to a working state.

Here are a few completely different methods to help fix Acer loading screen stuck:

Method 1: Disabling Secure Boot and Fast Boot

• Enter BIOS Settings: Press the key that opens the BIOS settings (usually F2, F12, Del, or Esc) when you start your laptop.
• Navigate to Advanced Settings: Look for the advanced settings or boot options section.
• Disable Secure Boot: Make sure Secure Boot is disabled. This allows you to boot from non-Microsoft operating systems and devices.
• Disable Fast Boot: Disable Fast Boot if it's enabled. This prevents your laptop from quickly booting up and sometimes prevents it from loading completely.
• Save and Exit BIOS: Save your changes and exit the BIOS settings. The laptop should now boot normally.

Method 2: Clearing the CMOS to fix Acer loading screen stuck

• Disconnect the Power and Battery: Unplug the power cord and remove the battery from your Acer laptop. If it's a laptop, you'll need to remove the battery for this to work.
• Clear the CMOS: Locate the CMOS battery on the motherboard. It's usually a small button or jumper cap. Press the button or remove the jumper cap to clear the CMOS. Please be careful not to damage any components.
• Replace the Battery and Power Cord: Put the battery back in and connect the power cord.
• Boot Your Laptop: Turn on your laptop and see if it boots normally.

This is a simple and fast way to fix Acer stuck loading screen on windows 10 without any extra tools. It essentially lets you resolve minor startup glitches by fully powering off your device, allowing you to immediately clear temporary system errors that cause the loading screen freeze.

Usage Guide: When your Acer laptop is stuck on the Windows 10 loading screen, hold down the power button for about 10-15 seconds to force the laptop to shut off completely. Wait a few seconds, then power it back on to see if the system loads properly. This method requires no complex operations and swiftly helps you easily fix Acer stuck loading screen on windows 10 caused by temporary system hangups, effectively resolving minor startup issues right away.

It is particularly useful for quick troubleshooting when your Acer laptop freezes during boot, especially for temporary glitches that don’t require advanced system repairs.

If you've tried many solutions but are still unable to resolve Acer stuck loading screen for windows 10, you may need to reset your computer. This will reinstall Windows, and you'll be able to keep your personal files during the process.

Step 1: Access the WinRE recovery environment on your Acer device.

Step 2: Navigate to Troubleshoot > Reset this PC.

Step 3: Select the ‘Keep my files’ option.

Step 4: Follow the on-screen instructions to complete the reinstallation of Windows.

This final solution fully fixes Acer stuck loading screen for windows 10, resolving the persistent startup freeze issue on your device. I should point out that, as a last resort, it will remove some installed applications and system settings, though it will ensure your personal files remain safe. However, it is not without its flaws; it has both Pros and cons

Pros 

• It can thoroughly resolve deep-seated system faults that cause the boot screen to freeze.
• It supports the preservation of personal files, preventing data loss.
• No complex manual operations are required; the process is guided by the system from start to finish.

cons

• Some installed software, drivers and custom system settings will be removed.
• The reset and subsequent system configuration will take a considerable amount of time.
• This is the last resort.

When facing Acer stuck loading screen for windows 10, you can use Windows’ built-in Startup Repair tool to fix boot issues automatically.

How to Fix an Acer stuck loading screen for windows 10

1. Please shut down your Acer laptop completely.

2. After restarting, immediately press the F11 key repeatedly to enter the Windows Recovery Environment.

3. Select Troubleshoot > Advanced options > Startup Repair.

4. Wait for Windows to automatically scan and attempt to repair the startup issue.

5. Once the repair is complete, restart your laptop and check if it boots normally.

This method is a key solution for Acer stuck loading screen for windows 10, helping resolve boot failures caused by corrupted system files or boot configurations without manual complex operations.