"netsh mbn add profile" fails with "Add Profile Failure: Invalid Profile XML"
I am in the process of adding a cellular modem to a device running Windows 10 IoT Core. I have just recently recreated the FFU I use to flash Windows IoT Core on to my device. In the past I have used this command to add a connection profile for the cellular modem: netsh mbn add profile interface="Cellular" name="modem_connect_profile.xml" With my new FFU, the interface name has changed from "Cellular" to "Cellular 23" so I updated the command to be: netsh mbn add profile interface="Cellular 23" name="modem_connect_profile.xml" However this results in the following error: Add Profile Failure: Invalid Profile XML I am confident that profile XML is well-formed and correct because when I execute the following command: netsh mbn connect interface="Cellular 23" connmode=tmp name="modem_connect_profile.xml" I see the following output when I execute: netsh mbn show interfaces There is 1 interface on the system: Name : Cellular 23 Description : CDC MBIM GUID : {052B63C8-1DC6-41C9-88FA-2432BB374165} Physical Address : 88:bd:98:5b:52:48 Additional PDP Context : No (Physical interface) Parent Interface Guid : No parent State : Connected Device type : Mobile Broadband device is embedded in the system Cellular class : GSM Device Id : 358148064538692 Manufacturer : Telit Model : CDC MBIM Firmware Version : 20.00.005 Provider Name : Verizon Roaming : Not roaming Signal : 22% RSSI / RSCP : 7 (-99 dBm) I have read that the cause of the Add Profile Failure: Invalid Profile XML message can be due to a previous profile but when I execute: netsh mbn show profiles I see: Profiles on interface Cellular 23: ------------------------------------- <None> What other steps can I try to get my connection profile added to my system?
