SMS WinRM DNS error
Hi, I started the cutover, old server was renamed with a new IP, new server was renamed to the OG server with IP it is now frozen at 69% due to WINrm failing due to being unable to resolve the name of the destination server. SVGB-TEST1 —> SVGB-TEST2 SVGB-TEST1(OLD) —> SVGB-TEST1 Failed cannot resolve SVGB-TEST2 (It has been renamed?) Any help appreciated.Couldn't transfer storage on any of the endpoints
NedPyle I have read the previous posts about this error and haven't been able to resolve my issue yet. My source and destination servers are fully patched, ver 1809 (build 17763.1192). When I run the transfer it transfers about 66 GB then fails. Fails at that point each time then get the above error Result. I've run Storage Migration from the Source and from the Destination with the same result. The Error log in Transfer detail is empty and under SMB detail the Result is just System error. Everything looks a lot like this article but didn't fix it https://techcommunity.microsoft.com/t5/storage-at-microsoft/fix-for-the-storage-migration-service-quot-couldn-t-transfer/ba-p/1015945
Storage Migration Service - Cutover execution failed
I'm working on a test migration from a 2008R2 file server to a Server 2022 target. I've done several migration attempts and am now stuck in a situation where I cannot begin a cutover. I get the following errors in the StorageMigrationService-Proxy (Admin) log. EventID 20502 ========================================= Cutover pair failed. Source Computer: <source server> Destination Computer: <destination server> Cutover stage: UnjoinSource Error: -2147467261 Message: Object reference not set to an instance of an object. Exception: at Microsoft.StorageMigration.Common.Util.GetQualifiedUserName(NetworkCredential credential) at Microsoft.StorageMigration.Proxy.Cutover.CutoverUtils.UnjoinDomain(NetworkCredential networkCredential, Boolean isLocal, String serverName, List`1 userCredentials, CancellationToken ct) at Microsoft.StorageMigration.Proxy.Service.Cutover.CutoverOperation.Run() . Guidance: If possible, take action to prevent the last cutover error from happening and resume cutover. Alternatives include bringing the systems back to initial state before cutover has started and start cutover again. Event ID 2504 ========================================= Cutover execution failed. Error Message: Object reference not set to an instance of an object. Error: -2147467261 Exception: at Microsoft.StorageMigration.Proxy.Service.Cutover.CutoverOperation.Run() at Microsoft.StorageMigration.Proxy.Service.Cutover.CutoverRequestHandler.ProcessRequest(CutoverRequest cutoverRequest, Guid operationId) I have tried initiating the migration from 3 different orchestration servers to 2 different targets and I still get the above errors. I've tried performing SMS database resets on both the orchestration servers and the targets and still get the above error whenever I try a cutover. The inventory & data-transfer are always successful. I suspect I need to reset something on the source computer, but I don't know what I'm looking for. Does anyone have any ideas?
Storage Migration Services cutover stuck at 91%
Hi, I'm using the Storage Migration Services to move an on prem 2012 R2 server to an Azure hosted 2019 server. I've successfully done the first two steps and I'm doing the cutover and the cutover process has been hung at 91% for several hours. I've confirmed that the new destination server has been successfully been renamed and that the old source has also been renamed. I can successfully ping and connect (RDP) to both servers. But the cutover process is still hung. I checked the event logs in the Storage Migration Services and I see this message logged over and over: 12/19/2022-15:25:53.777 [Info] GetResponseFromHost(fsserver01) returned status: 5. Is reachable: False [d:\os\src\base\dms\proxy\cutover\cutoverproxy\CutoverUtils.cs::IsHostReachable::640] But I'm able to successfully connect to the fsserver01 server with no issues. Is there anything I can do to have the Storage Migration Service complete the cutover? Thanks Nick
Windows Admin Center 2110 - Storage Migration Service (Missing Start Transfer button)
Hi guys, testing out Storage Migration Service on the latest Windows Admin Center version 2110. At the transfer phase, somehow the Start Transfer button to start the migration is missing. Anyone else facing this? All validation is passed and tested on a few different VMs and its still showing the same. Is this a bug, or am i missing something? Refer to the picture.WAC 2103.02 - Storage Migration Service Error Logs
Running a migration service and tried all the suggested corrections to obtain the error logs -- increased the processing time to 10 minutes validated all the SMB services are active etc. The error log still 'errors' out - I can download User/Group logs with no issue. Anyone got an idea of what / where to start digging into the next?WAC SMS Scan failing with Exception of type 'System.Exception' was thrown.
Hi We have 3 Win2008R2 servers to migrate. 3 new Win 2019 (1809) destination servers built and a new Win2019 (1809 Core) to act as the gateway server, with a Win10 PC (20H2) as a management station. WAC (2009 build 1.2.2009.21002) and SMS (1.115.0) have been installed. The Win2008R2 servers have had WMF 5.1 installed and are fully patched. I am using a domain admin account that is a member of the local admins on all servers. I can go through the first part of the SMS setup, adding the hosts and performing the validation which completes successfully. The next stage, Scan, is where the issue is. It appears to wait for 20 secs or so and then reports "Exception of type 'System.Exception' was thrown." and goes no further. It does this with all 3 Win2008R2 servers. If I test 2019 to 2019 it works fine. Windows Firewall is turned off on all profiles. The only error logs I can find are on the destination server, event ID 2503 and 2509: 2503 Job: ProfiletoFILV03 ID: 77f3669a-9051-XXXX-b7e1-6baadd23d03a State: Failed Error: 36934 Error Message: Inventory failed for all devices Guidance: Check the detailed error and make sure the inventory requirements are met. The job couldn't inventory any of the specified source computers. This could be because the orchestrator computer couldn't reach it over the network, possibly due to a firewall rule or missing permissions. 2509 Job: ProfiletoFILV03 Computer: XXXXXXXX.Domain.com State: Failed Error: -2146233088 Error Message: Guidance: Check the detailed error and make sure the inventory requirements are met. The inventory couldn't determine any aspects of the specified source computer. This could be because of missing permissions or privileges on the source or a blocked firewall port. Both of these imply Permissions, Firewall or simply missing. As stated, I'm using a Domain Admin account that is a member of the local administrators, the servers are all on the same subnet so no external firewall involved, Windows Firewall is switched off for all profiles, and we would have a much bigger issue if the file servers were dropping off the network. Be grateful if anyone else can think of anything to help...
Storage Migration Services Issue with scanning and validation
Here's my setup: Source server: Win 2008 R2 that has 5 shares on it (all from the same drive - D Drive). This is my AD and DC and DNS server. Destination server: Win 2019 Std. This is my secondary AD/DC/DNS. I have Windows Admin Center with Storage Migration Services setup. Both computers have 100% of their updates installed. During the project setup for Storage Migration Services - I'm adding and scanning a device (my 2008 R2 server). The scan goes fine, but the state will eventually tell me "Couldn't inventory some devices" - which is strange. I only have 1 device. Maybe it's talking about some folders. When I'm finally at the Transfer Data stage - validate devices: the validation fails with this message: We can transfer data from the source computer at maximum speed. This might fail when required software updates are not installed on the source. Fail: Error HRESULT E_FAIL has been returned from a call to a COM component. All the other validations pass. If I attempt to start the transfer, I get this error: Migration-01 : Start transfer : RemoteException: Transfer validation failed or was not run. Fix errors and rerun validation or override this check in Transfer settings. (Migration-01 is the name of the project I'm setting up). Not sure what's going on here. I suspect I need to resolve the first error, but I can't. I haven't found anything online related to this. The error is so generic it doesn't give me any information go really research. Can someone help? I'd greatly appreciate it. Thank you
Cannot Validate source and destination devices in Storage Migration Service
I'm trying to use Storage Migration Service and stuck at the "Validate source" step getting an error "Fail: No SMB connection" (Pic attached) Step 6 (https://docs.microsoft.com/en-us/windows-server/storage/storage-migration-service/migrate-data) Having issues trying to find a fix below are some errors from the logs 12/05/2019-16:30:37.013 [Erro] Destination volume has no drive level \\?\Volume{5ee218d7-0000-0000-0000-100000000000}\. Skipping [d:\os\src\base\dms\service\OperationManager\TestDevicePairTask.cs::PerformVolumeTests::240] 12/05/2019-16:30:36.997 [Erro] SMBCheck stage returned SMBDetected= false [d:\os\src\base\dms\service\OperationManager\TestDevicePairTask.cs::TestSmbConnection::672] 12/05/2019-16:30:36.779 [Warn] Failed to find registered proxy using destination name prodfile3.monash.vic.gov.au :ErrorCode: 36869, Service Exception 0x9005 at Microsoft.StorageMigration.Service.ProxyManager.GetProxyRecordByHost(String host) at Microsoft.StorageMigration.Service.ProxyManager.GetProxyDetail[T](String host) at Microsoft.StorageMigration.Service.TestDevicePairTask.TestDestinationExists(CancellationToken cancelToken) [d:\os\src\base\dms\service\OperationManager\TestDevicePairTask.cs::TestDestinationExists::795] 12/05/2019-16:24:27.875 [Erro] The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '10675199.02:48:05.4775807'. [d:\os\src\base\dms\service\ErrorHandlerBehaviorAttribute.cs::HandleError::42]
