Microsoft Industrial AI Partner Guide: Choosing the Right Data Expertise for Every Stage
As organizations scale Industrial AI, the challenge shifts from technology selection to deciding who should lead which part of the journey -- and when. Which partners should establish secure connectivity? Who enables production grade, AI ready industrial data? When do systems integrators step in to scale globally? This Partner Guide helps customers navigate these decisions with clarity and confidence: Identify which partners align to their current digital transformation and Industrial AI scenarios leveraging Azure IoT and Azure IoT Operations Confidently combine partners over time as they evolve from connectivity to intelligence to autonomous operations This guide focuses on the Industrial AI data plane – the partners and capabilities that extract, contextualize, and operationalize industrial data so it can reliably power AI at scale. It does not attempt to catalog or prescribe end‑to‑end Industrial AI applications or cloud‑hosted AI solutions. Instead, it helps customers understand how industrial partners create the trusted, contextualized data foundation upon which AI solutions can be built. Common Customer Journey Steps 1. Modernize Connectivity & Edge Foundations The industrial transformation journey starts with securely accessing operational data without touching deterministic control loops. Customers connect automation systems to a scalable, standards-based data foundation that modernizes operations while preserving safety, uptime and control. Outcomes customers realize Standardized OT data access across plants and sites Faster onboarding of legacy and new assets Clear OT–IT boundaries that protect safety and uptime Partner strengths at this stage Industrial hardware and edge infrastructure providers Protocol translation and OT connectivity Automation and edge platforms aligned with Azure IoT Operations 2. Accelerate Insights with Industrial AI With a consistent edge-to-cloud data plane in place, customers move beyond dashboards to repeatable, production-grade Industrial AI use cases. Customers rely on expert partners to turn standardized operational data into AI‑ready signals that can be consumed by analytics and AI solutions at scale across assets, lines, and sites. Outcomes customers realize Improved Operational efficiency and performance Adaptive facilities and production quality intelligence Energy, safety, and defect detection at scale Partner strengths at this stage Industrial data services that contextualize and standardize OT signals for AI consumption Domain-specific acceleration for common Industrial AI scenarios Data pipelines integrated with Azure IoT Operations and Microsoft Fabric 3. Prepare for Autonomous Operations As organizations advance toward closed‑loop optimization, the focus shifts to safe, scalable autonomy. Customers depend on partners to align data, infrastructure, and operational interfaces, while ensuring ongoing monitoring, governance, and lifecycle management across the full operational estate. Outcomes customers realize Proven reference architectures deployed across plants AI‑ready data foundations that adapt as operations scale Coordinated interaction between OT systems, AI models, and cloud intelligence Partner strengths at this stage Industrial automation leadership and control system expertise Edge infrastructure optimized and ready for Industrial AI scale Systems integrators enabling end‑to‑end implementation and repeatability Data Intelligence Plane of Industrial AI - Partner Matrix This matrix highlights which partners have the deepest expertise in accessing, contextualizing, and operationalizing industrial data so it can reliably power AI at scale. The matrix is not a catalog of end‑to‑end Industrial AI applications; it shows how specialized partners contribute data, infrastructure, and integration capabilities on a shared Azure foundation as organizations progress from connectivity to insight to autonomous operations. How to use this matrix: Start with your scenario → identify primary partner types → layer complementary partners as you scale. Partner Type Adaptive Cloud Primary Solution Example Scenarios Geography Advantech Industrial Hardware, Industrial Connectivity LoRaWAN gateway integration + Azure IoT Operations Industrial edge platforms with built in connectivity, industrial compute, LoRaWAN, sensor networks Global Accenture GSI Industrial AI, Digital Transformation, Modernization OEE, predictive maintenance, real-time defect detection, optimize supply chains, intelligent automation and robotics, energy efficiency Global Avanade GSI Factory Agents and Analytics based on Manufacturing Data Solutions Yield / Quality optimization, OEE, Agentic Root Cause Analysis and process optimization; Unified ISA-95 Manufacturing Data estate on MS Fabric Global Capgemini GSI The new AI imperative in manufacturing OEE, maintenance, defect detection, energy, robotics Global DXC GSI Intelligent Boost AI and IoT Analytics Platform 5G Industrial Connectivity, Defect detection, OEE, safety, energy monitoring Global Innominds SI Intelligent Connected Edge Platform Predictive maintenance, AI on edge, asset tracking North America, EMEA Litmus Automation Industrial Connectivity, Industrial Data Ops Litmus Edge + Azure IoT Operations Edge Data, Smart manufacturing, IIoT deployments at scale Global, North America Mesh Systems GSI & ISV Azure IoT & Azure IoT Operations implementation services and solutions (including Azure IoT Operations-aligned connector patterns) Device connectivity and management, data platforms, visualization, AI agents, and security North America, EMEA Nortal GSI Data-driven Industry Solutions IT/OT Connectivity, Unified Namespace, Digital Twins, Optimization, Edge, Industrial Data, Real‑Time Analytics & AI EMEA, North America & LATAM NVIDIA Technology Partner Accelerated AI Infrastructure; Open libraries, models, frameworks, and blueprints for AI development and deployment. Cross industry digitalization and AI development and deployment: Generative AI, Agentic AI, Physical AI, Robotics Global Oracle ISV Oracle Fusion Cloud SCM + Azure IoT Operations Real-time manufacturing Intelligence, AI powered insights, and automated production workflows Global Rockwell Automation Industrial Automation FactoryTalk Optix + Azure IoT Operations Factory modernization, visualization, edge orchestration, DataOps with connectivity context at scale, AI ops and services, physical equipment, MES Global Schneider Electric Industrial Automation Industrial Edge Physical equipment, Device modernization, energy, grid Global Siemens Industrial Automation & Software Industrial Edge + Azure IoT Operations reference architecture Industrial edge infrastructure at scale, OT/IT convergence, DataOps, Industrial AI suite, virtualized automation. Global Sight Machine ISV Integrated Industrial AI Stack Industrial AI, bottling, process optimization Global Softing Industrial Industrial Connectivity edgeConnector + Azure IoT Operations OT connectivity, multi-vendor PLC- and machine data integration, OPC UA information model deployment EMEA, Global TCS GSI Sensor to cloud intelligence Operations optimization, healthcare digital twin experiences, supply chain monitoring Global This Ecosystem Model enables Industrial AI solutions to scale through clear roles, respected boundaries and composable systems: Control systems continue to be driven by automation leaders Safety‑critical, deterministic control stays with industrial automation partners who manage real‑time operations and plant safety. Customers modernize analytics and AI while preserving uptime, reliability, and operational integrity. Data, AI, and analytics scale independently A consistent edge to cloud data plane supports cloud scale analytics and AI, accelerating insight delivery without entangling control systems or slowing operational change. This separation allows customers and software providers to build AI solutions on top of a stable, industrial‑grade data foundation without redefining control system responsibilities. Specialized partners align solutions across the estate Partners contribute focused expertise across connectivity, analytics, security, and operations, assembling solutions that reduce integration risk, shorten deployment cycles, and speed time to value across the operational estate. From vision to production Industrial AI at scale depends on turning operational data into trusted, contextualized intelligence safely, repeatably, and across the enterprise. This guide shows how industrial partners, aligned on a shared Azure foundation, create the data plane that enables AI solutions to succeed in production. When data is ready, intelligence scales. Call to action: Use this guide to identify the partners and capabilities that best align to your current Industrial AI needs and take the next step toward production‑ready outcomes on Azure.Siemens and Microsoft: Beyond Connectivity to Autonomous, Sustainable Manufacturing
Explore how Siemens Industrial Edge and Microsoft Azure IoT Operations enable secure edge-to-cloud integration, contextualized data, and AI-driven insights—transforming factories into adaptive, future-ready operations.
Azure IoT Hub with ADR (preview): Extending Azure capabilities and certificate management to IoT
Operational excellence in every industry begins by linking the physical world to the digital, enabling organizations to turn raw data from connected assets into actionable insights and real-world improvements. Azure IoT Hub and Azure IoT Operations make this possible by seamlessly integrating data from machines whether on a single factory floor or spread across the globe into a unified platform. Together, they serve as the backbone of connected operations, ensuring that assets, sensors this data is then moved to Microsoft Fabric for real-time analytics and further leveraged by AI agents to drive informed decisions. This approach lets organizations scale efficiently, unifying teams, sites, and systems under the Adaptive Cloud Strategy. It enables use of cloud-native and AI technologies across hybrid, multi-cloud, edge, and IoT environments in a single operational model. Azure IoT Hub empowers organizations to securely and reliably manage connected assets across the globe, providing real-time visibility and control over diverse operations. With proven scalability, broad device support, and robust management tools, IoT Hub delivers a unified platform for developing and operating IoT solutions. Organizations in various industries are using Azure IoT Hub to enhance their operations. In mining, sensors provide real-time safety data and support compliance. Fleet managers track equipment health to boost efficiency and prevent failures, while rail operators use GPS and vibration sensors for precise monitoring and issue detection. Ports utilize conveyor and loading system metrics to optimize scheduling and reduce delays. These examples show how Azure IoT Hub delivers actionable insights, greater safety, and operational efficiency through connected devices. As customers evolve, Azure IoT Hub continues to advance, deepening its integration with the Azure ecosystem and enabling AI-driven, connected operations for the next generation of applications. Today, we’re announcing the public preview of Azure IoT Hub integration with Azure Device Registry bringing IoT devices under the purview of Azure management plane via ARM resource representation and securing them with best-in-class Microsoft-backed X.509 certificate management capabilities. From Connected Devices to Connected Operations Ready-to-use AI platforms are enabling organizations to unlock untapped operational data and gain deeper insights. Organizations are leveraging AI to unify machine and enterprise data, extract actionable insights, and translate them into measurable business gains. They are broadly transitioning from connected devices that simply gather and transmit telemetry, to connected operations which empower supervisors and AI agents to interpret events and respond to scenarios in real time. The integration of Azure IoT Hub with ADR enhancements extends the comprehensive capabilities of Azure to IoT devices. With this integration, Azure Device Registry (ADR) acts as the unified control plane for managing both physical assets from Azure IoT Operations and devices from Azure IoT Hub. It provides a centralized registry, ensuring every entity whether an industrial asset or a connected device is uniquely represented and managed throughout its lifecycle. By integrating with Azure IoT Hub, ADR enables consistent device onboarding, certificate management, and operational visibility at scale. This integration simplifies large-scale IoT fleet management and supports compliance and auditability across diverse deployments. What’s New in this Preview We’re excited to announce the public preview of new capabilities that bring IoT devices into the broader Azure ecosystem. This integration allows IoT to be managed at scale through the Azure management plane. It also strengthens security and enables consistent governance across large deployments: Deep integration with Azure: The Azure Device Registry (ADR) now offers a unified control plane, simplifying identity, security, and policy management for millions of devices. New ADR features make it easier to register, classify, and monitor devices, supporting consistent governance and better operational insights. Combined with Device Provisioning Service (DPS), these enhancements help reduce deployment challenges, speed up time-to-value, and lower operational risks. With IoT Hub integration, IoT Hub devices are represented as Azure resources, providing: One unified registry across multiple IoT Hubs and Azure IoT Operations (AIO) instances. ARM-based management for all Azure resources from cloud to edge. A consolidated view of the entire IoT fleet, simplifying large-scale deployments, monitoring and management. Certificate lifecycle management: Now in public preview, this capability enables secure onboarding and automated certificate rotation for IoT devices, directly integrated with ADR and IoT Hub. X.509 certificates are widely recognized for providing a robust security posture by establishing trusted, cryptographically verifiable device identities. Starting today, customers can use a Microsoft-backed PKI to issue X.509 certificates across their IoT fleets. Devices receive operational certificates that authenticate with IoT Hub, chained to Certificate Authorities (CAs). Policy-driven lifecycle management makes certificate renewal simpler and keeps state in sync with your Hubs. This integration sets the stage for Physical AI by connecting digital and physical systems, thus unlocking new possibilities for data and artificial intelligence. Customer feedback from Private Preview This release has received positive feedback from private preview customers. Particularly the Microsoft-supported PKI and certificate management capabilities, highlighting that previous manual processes were inefficient and fragmented. Customers further noted the advantages of grouping devices from multiple IoT Hubs under a unified namespace, which streamlined management. Moreover, the integration of certificate management within ADR has diminished the reliance on custom solutions. “We were genuinely impressed by how seamless it was to implement. With just a few clicks, clear policy definitions, and two calls in firmware, the entire process became automated, frictionless, and reliable with no external dependencies.” – Uriel Kluk, CTO, Mesh Systems Why It Matters These investments make Azure IoT Hub the cornerstone for connected operations at scale, empowering customers to: Reduce manual cert ops with policy‑driven rotation (fewer outages due to expired certs). Consolidate device registry in ADR for cross‑hub fleet governance. Accelerate compliance audits with centralized certificate lineage. Apply advanced AI tooling for predictive insights and automation. Call to Action Explore the new capabilities in public preview today and start building the next generation of connected operations with Azure IoT Hub and ADR. Learn more on Azure IoT Hub documentationSolving the Data Challenge for Manufacturers with Sight Machine & Azure IoT Operations
Delivering Industrial AI: From Data to Results As manufacturers accelerate their digital transformation, the ability to unify and leverage operational data is the difference between incremental improvement and competitive advantage. Today, we’re launching a joint solution with Sight Machine, purpose-built to solve the OT data challenge and deliver the full Industrial AI stack in weeks, not months: Sight Machine and Microsoft Integrated Industrial AI Stack on Azure This offering is proven in the field, already driving measurable productivity gains for customers in automotive, food, and other sectors with rapid POC cycles and commercial-scale deployments. By integrating Sight Machine’s industrial AI platform with Azure IoT Operations and Microsoft Fabric, we standardize and contextualize machine data at scale, enabling analytics, automation, and actionable insights across the enterprise. What Sets This Solution Apart Fast Deployment: Get the full Industrial AI stack up and running in weeks, not months. End-to-End Integration: Sight Machine’s industrial AI platform works seamlessly with Azure IoT Operations and Microsoft Fabric, standardizing OT data for enterprise-wide use. Real Results: Customers in automotive, food, and other industries are already seeing measurable productivity gains and faster decision cycles. Scalable & Secure: Built on Azure’s adaptive cloud and zero-trust security, with SI partners ready to support commercial scale. Delivering a unified Industrial AI stack Today marks a pivotal moment for manufacturers: the launch of a fully integrated Industrial AI solution, jointly delivered by Microsoft and Sight Machine. This offering brings together the entire Industrial AI stack spanning cloud, edge, and on-premises, enabling organizations to unlock transformative business value. The integrated solution enables customers to transform data into business value by seamlessly contextualizing and moving data from the Edge using Sight Machine and Azure IoT Operations to Microsoft Fabric. Within Microsoft Fabric, the data can be further contextualized and enriched to support AI agents and can be extended to visualize 3D digital twins using NVIDIA Omniverse. The integrated solution has following key components: Azure IoT Operations Streams secure, real-time telemetry from industrial assets to the cloud, enabling visibility and control across edge and enterprise environments. Microsoft Fabric Provides a single analytics and governance platform, merging IT and OT data for enterprise-wide insights. Sight Machine Industrial AI Platform Refines data into “gold-level” quality, fully contextualized and structured for AI, predictive maintenance, and process optimization. M365 Copilot & Agentic Intelligence Surfaces actionable insights directly in familiar tools like Teams and Excel, empowering operators and managers to make informed decisions instantly. NVIDIA Omniverse Integration Extends capabilities into immersive 3D digital twins and physics-based simulations, enabling manufacturers to visualize live operations and test changes virtually before implementing them. Customer Impact Manufacturing is the world’s largest sector, generating twice as much data as any other industry. Yet, the complexity and fragmentation of OT (Operational Technology) data have long limited the adoption of AI at scale. Sight Machine solves this challenge by integrating with every level of the Azure stack, structuring raw OT data into high-quality, contextualized “gold” data, ready for advanced analytics and AI. This integrated offering removes barriers to AI adoption. Manufacturers can connect assets, contextualize data, and deliver actionable insights directly to teams, whether in Teams, Excel, or immersive 3D digital twins. The result: higher productivity, smarter operations, and continuous improvement. Take the Next Step Ready to accelerate your digital transformation? Explore the Sight Machine + Azure IoT Operations solution in the Marketplace. Start your journey to smarter manufacturing today: Sight Machine on AzureMicrosoft and Rockwell Automation: Transforming Industrial AI Together
Unlocking the Future of Connected Operations In today’s rapidly evolving industrial landscape, manufacturers face mounting pressure to increase agility, optimize operations, and harness data-driven insights across every level of production. The collaboration between Microsoft and Rockwell Automation represents a pivotal step toward achieving these goals. By combining Rockwell’s deep expertise in operational technology (OT) with Microsoft’s adaptive cloud approach, this partnership bridges the gap between OT and IT, creating a unified, intelligent ecosystem that empowers manufacturers to innovate at scale. Together, we enable seamless connectivity, advanced analytics, and AI-driven optimization across the factory floor from edge and cloud environments. Connected Operations powered by Microsoft and Rockwell Rockwell Automation’s FactoryTalk Optix and Microsoft’s Azure IoT Operations together deliver a powerful foundation for industrial transformation. FactoryTalk Optix provides a modern, flexible visualization platform for real-time monitoring and control of OT systems. FactoryTalk Optix supports numerous industrial protocols for secure interoperability and “smart-object” data modeling to provide analytics-ready data. Paired with Azure IoT Operations, a unified, adaptive cloud solution built on open standards and powered by Azure Arc, manufacturers gain seamless connectivity across the factory floor enabling edge to cloud orchestration. With support for protocols like OPC UA and MQTT, camera and third-party integration through Akri and WASM connectors, and Copilot-driven automation for observability and deployment, this partnership bridges OT and IT to unlock advanced analytics, AI-driven optimization, and predictive maintenance at scale. A Partnership That Delivers Scalable Innovation Customers can start utilizing FactoryTalk Optix with Azure IoT Operations as a scalable physical to digital foundation for transforming how they manufacture, design, and operate going forward. In partnership with Rockwell, there is a published GitHub sample that demonstrates how FactoryTalk Optix native IIoT connectivity protocols unlock contextualized data from industrial assets into Azure IoT Operations. With the 2510 Azure IoT Operations release , OPC Write capability is now available as well, creating a true read/write path for richer interoperability. The synergy between these technologies is a game-changer for manufacturers, unlocking advanced analytics, and AI-driven use cases. This collaboration delivers: Improved efficiency and reduced downtime through real-time connectivity and predictive maintenance Scalable edge-to-cloud architecture leveraging OPC UA and MQTT standards for unified OT/IT data Highly replicable, scalable deployments across hybrid and multicloud environments Proactive optimization with AI-driven design and analytics Democratized automation via Copilot capabilities for observability and deployment Unified IT management and centralized monitoring for streamlined operations Robust security and reduced integration complexity for faster time-to-value From the Shop Floor to the Boardroom By combining Rockwell’s industrial expertise with Microsoft’s cloud innovation, manufacturers can break down data silos, unify operations, and drive continuous optimization. AI-powered insights become accessible at every level, helping organizations anticipate change, improve safety and efficiency, and maintain a competitive edge in the digital era. Join Us at Rockwell Automation Fair Visit the Microsoft booth at Automation Fair to experience end-to-end demonstrations, explore customer stories, and see firsthand how the Rockwell–Microsoft ecosystem accelerates your digital transformation journey. Join live sessions at the Discovery Theatre – o Tuesday Nov 18th, 11:15am – 11:45am → The new industrial frontier - Using AI to scale faster, work smarter and unlock new value o Tuesday Nov 18 th 2pm – 3pm, and Thursday Nov 20 th at 10:00am – 11:00am → Bringing AI to the Factory Floor o Wednesday Nov 19 th , 1:45pm – 2:15pm → Start with Secure Solutions From Edge to Cloud Visit us at the Expo at Booth #1931 – For demos and conversations to see what we have to offer. Explore the products Learn more about Azure IoT Operations → https://azure.microsoft.com/en-us/products/iot-operations Explore FactoryTalk Optix → https://www.rockwellautomation.com/en-us/products/software/factorytalk/optix.html Hear more about our integration story at Microsoft Ignite → The new industrial frontierFirmware Analysis now Generally Available
Back in June, we announced the public preview of firmware analysis, a new capability available through Azure Arc to help organizations gain visibility into the security of their Internet of Things (IoT), Operational Technology (OT), and network devices. Today, we are excited to announce that firmware analysis is generally available (GA) for all Azure customers. In modern industrial environments, firmware security is a foundational requirement. IoT sensors and smart devices collect the data fueling AI-driven insights; if those devices aren’t secure, your data and operational continuity are at risk. During the preview, we heard from many customers who used firmware analysis to shine a light into their device software and address hidden vulnerabilities before attackers or downtime could strike. With general availability, firmware analysis is ready to help organizations fortify the “blind spots” in their infrastructure – from factory-floor sensors to branch office routers – by analyzing the software that runs on those devices. What Firmware Analysis Does for You Firmware analysis examines the low-level software (firmware) that powers IoT, OT and network devices, with no agent required on the device. You can upload a firmware image (for example, an extracted embedded Linux image), and the cloud service performs an automated security inspection. Key features include: Software inventory & vulnerability scanning: The service builds a Software Bill of Materials (SBOM) of components within the firmware and checks each component against known CVEs (Common Vulnerabilities and Exposures). This quickly surfaces any known vulnerabilities in your device’s software stack so you can prioritize patching those issues. Security configuration and hardening check: Firmware analysis evaluates how the firmware binaries are built, looking for security hardening measures (e.g. stack protections, ASLR) or dangerous configurations. If certain best practices are missing, the firmware might be easier to exploit – the tool flags this to inform the device manufacturer or your security team. Credential and secrets discovery: The analysis finds any hard-coded credentials (user accounts/password hashes) present in the firmware, as well as embedded cryptographic material like SSL/TLS certificates or keys. These could pose serious risks – for instance, default passwords that attackers could exploit (recall the Mirai botnet using factory-default creds) are identified so you can mitigate them. Any discovered certificates or keys can indicate potentially insecure design if left in production firmware. Comprehensive report: All security findings – from the Software Bill of Materials (SBOM), list of vulnerabilities to hardening recommendations and exposed secrets – are provided in a detailed report for each firmware image analyzed. This gives device makers and operators actionable intelligence to improve their device security posture. In short, firmware analysis provides deep insights into the contents and security quality of device firmware. It turns opaque firmware into transparent data, helping you answer, “What’s really inside my device software?” so you can address weaknesses proactively. What’s New and Licensing We’ve been hard at work making firmware analysis even better as we move to GA. Based on preview feedback, we’ve addressed bugs, implemented usability suggestions and improved the firmware analysis SDKs, CLI and PowerShell extensions. A new Azure resource called “firmware workspace” now stores analyzed firmware images. Firmware analysis workspaces are currently available as a Free Firmware Analysis Workspace SKU with capacity limits. Getting Started If you have IoT, OT and network devices in your environment, use firmware analysis to test just how secure your devices are. Getting started is easy: access firmware analysis by searching “firmware analysis” in the Azure portal, or access using this link. Onboard your subscription and then upload firmware images for analysis. For a step-by-step tutorial, visit our official documentation. The service currently supports embedded Linux-based images up to 1GB in size. We want to thank all the preview participants who tested firmware analysis and provided feedback. You helped us refine the service for GA and we’re thrilled to make this powerful tool broadly available to help secure IoT, OT and network devices around the world. We can’t wait to see how you put it to work. As always, we value your feedback, so please let us know what you think.
Azure IoT Operations MQTT Broker: Performance Benchmarking on Throughput and Latency
1. Introduction When deploying an MQTT broker in a production environment, understanding its performance characteristics is crucial. Whether you're handling IoT sensor data, real-time event streams, or enterprise messaging, knowing how the broker performs under load helps in optimizing deployments. In this post, we evaluate the performance of the Azure IoT Operations MQTT Broker (subsequently referred to as Broker for brevity), focusing on: Throughput – How many messages per second the broker can handle. Latency – The time taken for messages to travel from publishers to subscribers. All tests were conducted using MQTT QoS 1 to ensure consistent balance between reliability and throughput. By following a structured performance testing approach, we aim to provide insights into how the Broker scales and where potential bottlenecks may arise. 👉 If you're looking for a quick summary, jump to the Key Takeaways section below. 2. Test Setup For accurate benchmarking, we set up Standard_D4s_v5 virtual machines (VMs) to ensure consistent and efficient message handling. To replicate our performance results, use the same VM SKU and test configuration. 2. 1 Infrastructure configuration Hardware configuration VM Architecture: x64 VM Image: Ubuntu Server 22.04 LTS - x64 Gen2 VM SKU: Standard_D4s_v5 vCPUs: 4 Memory: 16 GiB RAM Networking: All VMs are within the same virtual network (VNet) to minimize latency and reduce external network delays Software configuration OS Flavor: Ubuntu Server 22.04 LTS Version: 22.04 LTS Kubernetes distribution: K3s Kubernetes version: v1.28.5 2.2 Azure IoT Operation configuration The Azure IoT Operations configuration defined below is optimized for performance testing and MUST NOT be used in production as TLS encryption, authentication, and diagnostics pods are disabled to reduce variability. The Broker consists of frontend and backend partitions for optimized message handling: This setup is optimized for a 5-node cluster, ensuring scalability, and redundancy. Broker Configuration: Frontend: 5 replicas Backend: 5 partitions Redundancy factor of 2 2 workers Note: Increased redundancy doubles CPU usage, and therefore it also reduces the total available CPU for performing the same workload, potentially impacting overall efficiency. Broker Listener: Configured with a Load Balancer port 1883 Broker Nodes: 5 x Azure D4s_v5 VMs (4 vCPUs, 16 GiB memory, Ubuntu 22.04) Client Node: 1 x Azure D16s v5 VM (16 vCPUs, 64 GiB memory for load testing) Note: A more powerful 8-core VM is recommended to prevent the client from becoming a bottleneck, as EMQTT-bench by EMQX has high CPU consumption. The broker configuration is available in Azure IoT Mqtt Optimization. Json 3. Methodology To evaluate the performance of IoT Operations MQTT broker we used emqtt-bench, an open source MQTT v5.0 benchmark tool designed by EMQX. For optimal performance during testing, the inflight queue should be configured to a minimum of 100. 3.1 Client Configuration For 5-node cluster testing, a dedicated high-performance VM is required to act as the client. This VM must be separate from the cluster to prevent resource contention, ensuring that benchmarking reflects the broker's actual optimal performance. 3.2 Understanding the Performance Metrics Maximum Throughput – Measures the highest number of messages per second the broker can process. Note: Optimal performance requires finding a balance—publishers should send messages fast enough to fully utilize subscribers without overwhelming them. Average Latency– The time, in milliseconds, it takes for a message to travel from a publisher to a subscriber. Message Size – Tested with 16 Bytes, 8 KB, and 255 KB payloads to understand size impact. Evaluates how different payload sizes impact throughput and latency. Data Throughput – Measures the total volume of data transmitted per second, expected in megabytes per second (MB/sec). 3.3 Test Scenarios We tested the broker under different conditions to observe how it handles increasing workloads: Varying Publisher Rates – Analyzing throughput changes with increasing message rates. Different Payload Sizes – Measuring the impact of small (16 B), medium (8 KB), and large (255 KB) payloads. Fan-In / Balanced / Fan-Out – Comparing multiple publishers to one subscriber (fan-in) vs. one publisher to many subscribers (fan-out) vs an equal number of publishers and subscribers (balanced). Publisher / Subscriber Configuration – Vary number of publishers and subscribers across the three scenarios. QoS - All tests were performed using MQTT QoS 1, which ensures at least once message delivery. This strikes a balance between reliability and performance, making it more representative of real-world production scenarios where message loss is unacceptable, but the overhead of QoS 2 is not justified. We measured broker efficiency using different payload sizes across different publisher-to-subscriber ratios. The Fan-In test evaluated performance with a high number of publishers sending messages to a single subscriber. The Fan-Out stress test analyzed message distribution from a limited number of publishers to many subscribers under high throughput conditions. The Balanced test simulated a mixed workload with equal publishers and subscribers. 4. Results Detailed Performance Metrics: Fan-In, Fan-Out, and Balanced Scenarios Scenario Configuration Payload Size Max Throughput (msg/sec) Data Throughput (MB/sec) Average Latency (ms) Workload Description Fan-In 1000 pub 1 sub 16 B 41,352 0.63 124 High-Load Fan-In 1000 pub 1 sub 8 KB 14,439 112.67 26 High-Load Fan-In 1000 pub 1 sub 255 KB 992 246.8 520 High-Load Fan-In Balanced 1 pub 1 sub 16 B 50,739 6.49 2 Balanced Mixed-Load 1 pub 1 sub 8 KB 9,500 77.8 10 Balanced Mixed-Load 1 pub 1 sub 255 KB 1,314 327.08 540 Balanced Mixed-Load 100 pub 100 sub 16 B 279,949 4.27 350 Balanced Mixed-Load 100 pub 100 sub 8 KB 34,193 266.95 139 Balanced Mixed-Load 100 pub 100 sub 255 KB 2,871 715.42 2,800 Balanced Mixed-Load Fan-Out 1 pub 1000 sub 16 B 42,000 0.64 4 Large-scale Broadcast Fan-Out 1 pub 1000 sub 8 KB 15,003 117.25 6 Large-scale Broadcast Fan-Out 1 pub 1000 sub 255 KB 1,000 249.86 130 Large-scale Broadcast Fan-Out 5. Key Takeaways Takeaway 1: Data Throughput Scales with Payload Size. Even though the number of messages per second drops with larger payloads, data throughput (MB/sec) increases significantly. For example: Fan-In at 255 KB: 246.8 MB/sec Balanced at 255 KB: 715.4 MB/sec Takeaway 2: Performs Best in Low-Latency Use Cases. When message sizes are small (e.g. 16 B, 8 KB) and the topology is lightweight (e.g. 1 pub to 1 sub), the broker achieves: Avg latency as low as 1-2 ms Throughput over 270,000 msg/sec (Balanced scenario at 16 B) Ideal low-latency use cases: Real-time control systems (e.g. robotic arm commands, PLC feedback loops) Smart home device synchronization Autonomous vehicle telemetry coordination Industrial automation events (e.g. triggers from sensors to actuators) For time-sensitive operations, our broker provides sub-10 ms latencies and massive message fanout capability, even under constrained payload sizes. Takeaway 3: Fan-In Saturates Faster Than Fan-Out In QoS 1 tests, we observed Fan-In topologies (1000 devices → 1 endpoint) hit latency walls earlier than Fan-Out topologies (1 device → 1000 endpoints), even with similar message throughput. Fan-In (8 KB): 14,439 msg/sec @ 26 ms latency Fan-Out (8 KB): 15,003 msg/sec @ only 6 ms latency What this shows: In Fan-In, the broker handles thousands of simultaneous inbound QoS 1 acknowledgments — creating coordination pressure. In Fan-Out, a single publisher sends at a controlled rate, making it easier for the broker to fan out efficiently. We designed our broker to sustain intelligent traffic shaping and are continuing to enhance its performance under Fan-In workloads where coordination pressure is highest. 6. Optimization Strategies The Azure IoT Operations MQTT broker is built to support scalable, high-throughput, and low-latency messaging. To harness its full potential across diverse workload patterns, optimization should focus on balanced resource utilization and minimizing message delivery bottlenecks. Maximize Throughput without overload Fan-Out scenarios achieved strong throughput with consistently low latency, even under high subscriber counts. While they didn’t reach the raw message rate of Balanced workloads, their efficiency under broadcast pressure makes them ideal for scenarios requiring timely delivery to many endpoints. Recommended Actions: Batch and Compress Messages: Reduces overhead, improving payload transmission rates. Balance Publish Load: Distribute publishers evenly across broker nodes to avoid overloading a single point of ingestion. Maintain Low Latency for Real-Time Use Cases The broker excels in low-latency performance for small payloads and tightly coupled pub-sub pairs — as seen in 1:1 scenarios with 16 B payloads achieving 2–6 ms latency. These characteristics are crucial for real-time, control-plane workloads. Recommended Actions: Use Smaller Payloads for Time-Sensitive Ops: Critical for scenarios like robotics, actuator control, or telemetry alerting. Load Balance Across Nodes: Adjust broker cardinality, including frontend replicas (for client connection distribution) and backend partitions (for message throughput scaling) to ensure even load distribution across nodes and optimal performance. Enable MQTT Persistent Sessions: Minimizes reconnection overhead for frequently offline clients, learn how to enable persistent sessions with Mosquitto CLI by setting -c and --session-expiry-interval Optimize Deployment Scale for Workload Demands Scalability depends on configuring the right cardinality — that is, the number of frontend replicas, backend partitions, and compute resources — to match your connection and throughput requirements. Recommended Actions: High Connection Load: Scale frontend replicas to match node count (e.g., 3 replicas for 3 nodes) to distribute client connections evenly. High Message Throughput: Increase backend partitions to parallelize message processing (e.g., start with 1 partition per node and scale as needed). Heavy Payload Scenarios: Allocate more memory and CPU to worker pods to avoid slowdowns from large payload serialization and transmission. Backend Resiliency: Ensure redundancyFactor remains at the default of 2 (or more) so that each partition has at least two replicas, enabling failover protection without additional configuration For detailed guidance on these optimizations, visit our documentation: Learn more → 7. Conclusion The Azure IoT Operations MQTT broker is engineered for high performance, scalability, and efficiency, as demonstrated through rigorous benchmarking. In high-throughput balanced configurations, it sustained up to 279,949 messages/sec with 16 B payloads, showcasing best-in-class throughput for high-volume, symmetric pub-sub workloads. For bandwidth-heavy use cases, the broker handled up to 715 MB/sec (255 KB payloads), proving its scalability for large data transfers. Balanced 1:1 scenario also delivered predictable low-latency performance, with average latencies as low as 2 ms, making them ideal for real-time messaging. Meanwhile, Fan-In configurations remain optimal for centralized data aggregation tasks like telemetry logging, handling tens of thousands of messages/secs with acceptable latency. To maximize performance, we recommend key optimization strategies including load balancing, latency reduction, and workload-specific tuning. These approaches ensure efficiency at scale—whether you're managing high connection loads, scaling throughput, or handling large payloads in real-world deployments. For in-depth configuration guidance, visit our documentation.Announcing the Firmware Analysis Public Preview
Consider an organization with thousands of smart sensors, IoT/OT and network equipment deployed on factory floors. Most of these devices are running full operating systems, but unlike traditional IT endpoints which often run security agents, IoT/OT and network devices frequently function as “black boxes”: you have little visibility into what software they’re running, which patches are applied, or what vulnerabilities might exist within them. This is the challenge many organizations face with IoT/OT and networking equipment - when a critical vulnerability is disclosed, how do you know which devices are at risk? To help address this challenge, we are excited to announce the public preview of firmware analysis, a new capability available through Azure Arc. This extends the firmware analysis feature we introduced in Microsoft Defender for IoT, making it available to a broader range of customers and scenarios through Azure. Our goal is to provide deeper visibility into IoT/OT and network devices by analyzing the foundational software (firmware) they run. Firmware analysis will also help companies that build firmware for devices better meet emerging cybersecurity regulations on their products. In this post, we’ll explain how the service works, its key features, and how it helps secure the sensors and edge devices that feed data into AI-driven industrial transformation. Securing Edge Devices to Power AI-Driven Industrial Transformation In modern industrial environments, data is king. Organizations are embracing Industry 4.0 and AI-driven solutions to optimize operations, leveraging advanced analytics and machine learning. The path to AI-driven industrial transformation is fueled by data – and much of that data comes from sensors and smart devices at the edge of the network. These edge devices measure temperature, pressure, vibration, and dozens of other parameters on the factory floor or in remote sites, feeding streams of information to cloud platforms where AI models turn data into insights. In fact, sensors are the frontline data collectors in systems like predictive maintenance, continuously monitoring equipment and generating the raw data that powers AI predictions. However, if those edge devices, sensors, and networking equipment are not secure and become compromised, the quality and reliability of the data (and thus the AI insights) cannot be guaranteed. Vulnerable devices can also be used by attackers to establish a foothold in the network, allowing them to move laterally to compromise other critical systems. In an industrial setting this could mean safety hazards, unplanned downtime, or costly inefficiencies. This is why securing the smart devices and networking equipment at the foundation of your industrial IoT data pipeline is so critical to digital transformation initiatives. By using firmware analysis on the devices’ firmware before deployment (and regularly as firmware updates roll out), the manufacturer and plant operators gain visibility into the security posture of their environment. For example, they might discover that a particular device model’s firmware contains an outdated open-source library with a known critical vulnerability. With that insight, they can work with the vendor to get a patched firmware update before any exploit occurs in the field. Or the analysis might reveal a hard-coded passwords for maintenance account in the device; the ops team can then ensure those credentials are changed or the device is isolated in a network segment with additional monitoring. In short, firmware analysis provides actionable intelligence to fortify each link in the chain of devices that your industrial systems depend on. The result is a more secure, resilient data foundation for your AI-driven transformation efforts – leading to reliable insights and safer, smarter operations on the plant floor. Firmware analysis is also a key tool used by device builders – by analyzing device firmware images before they are delivered to customers, builders can make sure that new releases and firmware updates meet their and their customers’ security standards. Firmware analysis is a key component to address emerging cybersecurity regulations such as the EU Cyber Resilience Act and the U.S. Cyber Trust Mark. How Firmware Analysis Works and Key Features Firmware analysis takes a binary firmware image (the low-level software running on an IoT/OT and network device) and conducts an automated security analysis. You can upload an unencrypted, embedded Linux-based firmware image to the firmware analysis portal. The service unpacks the image, inspects its file system, and identifies potential hidden threat vectors – all without needing any agent on the device. Here are the main capabilities of the firmware analysis service: Identifying software components and vulnerabilities: The first thing the analysis does is produce an inventory of software components found inside the firmware, generating a Software Bill of Materials (SBOM). This inventory focuses especially on open-source packages used in the firmware. Using this SBOM, the service then scans for known vulnerabilities by checking the identified components against public Common Vulnerabilities and Exposures (CVEs) databases. This surfaces any known security flaws in the device’s software stack, allowing device manufacturers and operators to prioritize patches for those issues. Analyzing binaries for security hardening: Beyond known vulnerabilities, our firmware analysis examines how the firmware’s binaries were built and whether they follow security best practices. For example, it checks for protections like stack canaries, ASLR (Address Space Layout Randomization), and other compile-time defenses. This “binary hardening” assessment indicates how resistant the device’s software might be to exploitation. If the firmware lacks certain protections, it suggests the device could be easier to exploit and highlights a need for improved secure development practices by the manufacturer. In short, this feature acts as a gauge of the device’s overall security hygiene in its compiled code. Finding weak credentials and embedded secrets: Another critical aspect of the analysis is identifying hard-coded user accounts or credentials in the firmware. Hard-coded or default passwords are a well-known weakness in IoT devices – for instance, the Mirai botnet famously leveraged a list of over 60 factory-default usernames and passwords to hijack IoT devices for DDoS attacks. Firmware analysis will flag any built-in user accounts and the password hash algorithms used, so manufacturers can remove or strengthen them, and enterprise security teams can avoid deploying devices with known default credentials. Additionally, the firmware analysis looks for cryptographic materials embedded in the image. It will detect things like expired or self-signed TLS/SSL certificates, which could jeopardize secure communications from a device. It also searches for any public or private cryptographic keys left inside the firmware – secrets that, if found by adversaries, could grant unauthorized access to the device or associated cloud services. By uncovering these hidden secrets, the service helps eliminate serious risks that might otherwise go unnoticed in the device’s software. All these insights – from software inventory and CVEs to hardening checks and secret material detection – are provided in a detailed report for each firmware image you analyze. Firmware analysis provides deep insights, clear visibility, and actionable intelligence into your devices' security posture, enabling you to confidently operate your industrial environments in the era of AI-driven industrial transformation. Getting Started and What’s Next If you have IoT/OT and network devices in your environment, use firmware analysis to test just how secure your devices are. Getting started is easy: access firmware analysis public preview by searching on “firmware analysis” in the Azure portal, or access using this link. In the future, firmware analysis will be more tightly integrated into the Azure portal. Onboard your subscription to the preview and then upload firmware images for analysis - here is a step-by-step tutorial. The service currently supports embedded Linux-based images up to 1GB in size. In this preview phase, there is no cost to analyze your firmware – our goal is to gather feedback. We are excited to share this capability with you, as it provides a powerful new tool for securing IoT/OT and network devices at scale. By shedding light on the hidden risks in device firmware, firmware analysis helps you protect the very devices that enable your AI and digital transformation initiatives. Firmware is no longer just low-level code—it’s a high-stakes surface for attack, and one that demands visibility and control. Firmware analysis equips security teams, engineers, and plant operators with the intelligence needed to act decisively—before vulnerabilities become headlines, and before attackers get a foothold. Please give the firmware analysis preview a try and let us know what you think.Microsoft and Siemens: Accelerating Digital Transformation Together
In the ever-evolving landscape of industrial manufacturing, the collaboration between Microsoft and Siemens marks a significant step towards achieving adaptive and integrated production systems. Leveraging the capabilities of Siemens Xcelerator and Microsoft’s adaptive cloud approach, this partnership aims to bridge the gap between operational technology (OT) and information technology (IT) to create a seamless, data-driven production environment. Breaking Down Silos with Edge-to-Cloud Integration The convergence of IT and OT environments is revolutionizing industrial data and workloads, enabling the creation of adaptive production systems that enhance efficiency, flexibility, and innovation. Edge computing plays a pivotal role in this transformation by capturing and processing data directly at the source. Siemens Industrial Edge seamlessly interfaces with Microsoft Azure IoT Operations, enabling manufacturers to integrate MQTT and OPC UA data flows from the Industrial Edge with Azure IoT Operations. This joint effort ensures continuous data flows from industrial assets to Azure IoT Operations, fostering an interoperable OT and IT data plane. A Collaborative Approach to Modern Manufacturing Siemens brings extensive expertise in factory automation and digital transformation to this collaboration. Siemens Industrial Edge facilitates the deployment and management of workloads and connectivity applications, seamlessly connecting industrial assets to the cloud. This powerful OT data plane, provided by Siemens Industrial Edge, addresses mission-critical production applications such as virtualized control, low-latency closed-loop AI, executable digital twins, and production line-level analytics. Azure’s adaptive cloud approach integrates teams, sites, and systems into a unified model for operations, security, applications, and data across hybrid, multicloud, edge, and IoT environments. This approach ensures that all aspects of an organization's digital infrastructure work together, enhancing efficiency and collaboration. Azure IoT Operations, a component of this adaptive cloud approach, provides tools and infrastructure to connect edge devices while integrating data, enabling organizations to optimize their operations and utilize the potential of their IoT environments. Driving Digital Transformation Together As manufacturers face increasingly challenging conditions, such as scarce resources and volatile supply chains, the need for adaptive and scalable production systems has never been greater. Siemens and Microsoft are committed to reducing the complexity of integrating and managing infrastructure, data, and applications. This collaboration enables manufacturers to accelerate their digital transformation, moving from automated to adaptive production systems. Harnessing AI for Enhanced Production The partnership between Microsoft and Siemens empowers manufacturers to leverage AI to improve machine performance, product quality, and operational efficiency. By utilizing the Siemens Industrial AI portfolio alongside Azure Machine Learning services, manufacturers can train AI models in the cloud and deploy them at the edge with low latency. This capability allows for real-time insights and decision-making, enhancing overall equipment efficiency and reducing manual rework and costs. The Road Ahead The partnership between Siemens and Microsoft represents a significant milestone in the journey towards digital transformation. By providing a seamless data flow from the shopfloor to the cloud, this collaboration empowers manufacturers to harness advanced technologies such as AI and digital twins to streamline their production processes. As both companies continue to innovate and expand their capabilities, the future of manufacturing looks brighter than ever. For further details on Microsoft’s adaptive cloud approach, visit https://azure.microsoft.com/en-us/solutions/adaptive-cloud. You can also visit the Microsoft booth at Hannover Messe 2025 in Hall 017, Booth G06 to learn more and see the adaptive cloud approach and Azure IoT Operations in action. For more information on Siemens Industrial Edge, visit Siemens Xcelerator: Siemens accelerates IT and OT integration with Microsoft for Edge, Cloud, AI and Simulation | Press | Company | SiemensScaling industrial transformation with a robust partner ecosystem
In recent years, manufacturers have been on a journey to incorporate intelligent technologies like AI into their business processes. These exciting advancements are happening within an extended ecosystem, encompassing everything from planning and manufacturing to distribution and servicing of goods. A defining aspect of many such business processes is their continuous generation of data, which, when effectively contextualized and analyzed, can unlock critical business outcomes, including minimizing downtime, reducing waste, enhancing quality, improving sustainability, and boosting worker productivity. In addition to analytics, a comprehensive data governance strategy is fundamental as it supports the ability to embrace ecosystem-driven collaboration, a key component to unlock the full potential of AI-driven manufacturing. Challenges in meeting the promise of IT and OT integration With AI only as good as the data behind it, the ability to harness data across an ecosystem is paramount. However, the inherent complexities within industrial environments create digital transformation barriers. Each factory has its own unique mix of automation equipment and software configurations based on site-specific production processes. Management and data handling are also system and site specific. When organizations try to scale transformation efforts across different sites, these complexities multiply, with individual IT management systems adding permutations. Due to the variety of source and configuration combinations, pulling the right data, semantics, and contextualization into an external analysis platform becomes incredibly difficult and cost prohibitive. As a result, the ability to scale an outcome through the use of a digital feedback loop is completely out of reach. How an adaptive cloud approach supports operational transformation To overcome these challenges, organizations can benefit from a consistent approach to industrial data value realization that is repeatable across sites. Azure’s adaptive cloud approach enables organizations to secure, manage, and scale industrial operations by unifying data, applications, and infrastructure across edge and cloud environments. By leveraging the adaptive cloud approach, businesses can create a unified data foundation, breaking down operational silos to drive AI-driven insights and improved collaboration between IT and OT teams. Azure IoT Operations, enabled by Arc empowers customers to easily move machine and process data between the edge and cloud in a highly unified and repeatable way. Under the hood, Azure IoT Operations is a full-stack data plane that runs in on-premises Arc-enabled Kubernetes clusters. It enables customers to discover Assets via Akri and collect data. Then, customers can process and send data from the edge to the cloud using open standards and open protocols that are managed and supported by Microsoft. This solution helps enable unified data flow from facilities to natively integrated cloud destinations, including Microsoft Fabric, Azure Event Hubs, and Azure Event Grid's MQTT broker which provides real-time insights and AI-driven decision-making. Azure IoT Operations leverages Azure Arc to extend the cloud management pattern down to the physical site, using the same cloud deployment and management controls as Azure to enable unique advantages in repeatability and scalability across the enterprise. While Azure's adaptive cloud approach can provide a foundation to simplify everything from data collection to scaling AI initiatives, Microsoft is a platform company, and our partners are essential to success in the complex industrial market. Why a partner ecosystem is critical for enabling customer success Achieving business outcomes from industrial data requires navigating the complexity of interconnected technology landscapes, where diverse technologies and systems must cohesively integrate. The siloed IT, OT, and ET data that results from these diverse systems can slow AI adoption, limiting manufacturers’ ability to extract real-time insights. A collaborative vendor network can help address these challenges by enabling streamlined data exchange, enhanced automation, and increased operational intelligence. The transformation enabled by this network demands a collective approach, bringing together industrial automation partners offering industry-specific AI and analytics solutions, system integrators collaboratively engineering IT-OT solutions, OEMs modernizing production lines, and ISVs to develop industry-specific solutions that drive efficiency and scalability. A multi-cloud, open, and interoperable approach can allow businesses to connect engineering, production, and supply chain workflows into AI-driven digital infrastructure from cloud to edge. Manufacturers operate in complex multi-vendor environments that demand flexibility and interoperability. Choosing to adopt an open and collaborative partner network approach offers the opportunity to extend the life of investments and adopt AI and automation gradually. In addition, unlike closed models that often lead to vendor lock in, open ecosystems enhance security and governance through consistent policy enforcement, interoperability, and real-time visibility across multi-cloud, edge, and on-prem environments. For instance, a solution like Azure Arc offers centralized security controls, automated compliance and third-party tool integration. Industrial enterprises desire a unified, scalable AI-cloud-edge strategy to optimize engineering, production, and supply chain workflows. To make outcomes from Industrial AI initiatives a reality, organizations — including traditional competitors —should consider embracing partnerships, open standards and an adaptive cloud approach to enable easier connectivity and interoperability. Microsoft’s open, scalable, and multi-cloud ecosystem helps enable more efficient integration of Azure solutions with third-party platforms (public and private clouds) and open industry standards that enable data interoperability across IoT, AI, and automation solutions. Learn more about how Microsoft, along with partners, is reimagining how intelligent digital threads and AI agents will transform the manufacturing industry here. Join Us - Industrial AI in Action at Hannover Messe 2025 Join us at the Microsoft booth in Digital Ecosystems Hall 17 to explore the latest innovations in our partner ecosystem supporting the transformation of industrial operations. Experience live demonstrations showcasing how AI-driven manufacturing, real-time data insights, and an adaptive cloud approach drive efficiency, flexibility, and innovation. See firsthand how Microsoft and its partners mentioned below are enabling intelligent automation, predictive quality control, and improved IT/OT integration to accelerate digital transformation. Avanade Avanade excels in IT/OT integration and advanced manufacturing solutions, with specialized expertise in integrating PLM, ERP, and MES systems for digital continuity across design, manufacturing, supply chain, and service processes. Avanade offers dynamic sourcing for flexible procurement and supplier collaboration, process flexibility for diverse product variants, and human-machine collaboration to meet new product requirements. At HMI 2025, Avanade and Microsoft will showcase advanced closed-loop manufacturing demos using AI machine vision for quality control, integrated with Azure IoT Operations—which leverages MQTT and OPC UA protocols to streamline data transport and connectivity. Visit the Microsoft booth to explore how seamless system integration, dynamic sourcing, and human-machine collaboration can help produce superior products faster with less waste. Learn more about Avanade at HMI 2025. Capgemini Microsoft and Capgemini are driving the next era of smart manufacturing by embracing the adaptive cloud approach to accelerate digital transformation. Through Capgemini’s Intelligent Industry offerings worker performance and operational efficiencies can be improved through AI-driven processes—empowering manufacturers to move beyond manual workflows and unlock new levels of productivity. Capgemini integrates across edge to cloud environments using services like Azure IoT Operations, Azure AI, and Microsoft Fabric to optimize quality, and overall equipment effectiveness (OEE) for manufacturers. Join us at Capgemini’s Theatre Talk at HMI on Thursday, April 3 at 10:00am, where industry leaders will share how AI, when paired with edge to cloud technologies, can unlock the full potential of smart factories. Be part of the conversation—see what’s next in digital manufacturing! Celebal Technologies The Operational Technology (OT) Data Liberator by Celebal Technologies extracts, processes, and integrates OT data into a centralized Lakehouse, ensuring metadata synchronization, real-time streaming, historical data retrieval, and a resilient data pipeline—all while maintaining full data governance and simplified infrastructure management within the customer’s network. Deployed as a Kubernetes workload at the edge, the Liberator streams MQTT data directly into Azure IoT Operations and can be configured to leverage Akri-enabled connectors for protocol translation, eliminating traditional data silos and accelerating digital transformation. Powered by Azure IoT Operations, the OT Data Liberator delivers secure, scalable connectivity across legacy and modern OT systems, enabling data transformation and management. From manufacturing and energy to utilities and resources, this collaboration empowers industries to optimize operations, enhance security, and scale digital transformation with confidence. Learn more here. Litmus Litmus, a leader in Industrial Data Operations, has partnered with Microsoft to accelerate industrial transformation by integrating Litmus Edge with Azure IoT Operations. This collaboration enables seamless connectivity through the Akri Litmus connector, supporting data processing and management of factory edge devices while bridging legacy OT systems with Microsoft’s edge to cloud technologies, including Azure Arc and Microsoft Fabric. The joint solution delivers zero-code protocol integration, centralized device orchestration, and real-time insights, simplifying edge-to-cloud data operations. Key outcomes include faster AI deployment, reduced downtime, improved product quality, and enhanced operational agility across industrial environments. Together, Litmus and Microsoft offer a unified scalable platform that empowers manufacturers to modernize operations and easily replicate lines and sites to unlock the full potential of their industrial data. Visit the Microsoft booth to see a live demo of this powerful edge-to-cloud solution in action and learn more here. Loopr.ai Loopr delivers real-time, AI-driven visual inspection for complex assemblies, performing over 400,000 inspections annually to enhance quality consistency, workforce efficiency, and cost reduction. With Azure IoT Operations, Loopr efficiently integrates with on-premise factory systems, enterprise ERP, and cloud analytics like Microsoft Fabric, enabling manufacturers to deploy AI-driven quality control within their existing Azure infrastructure. Loopr powered by Azure IoT Operations enables customers to overcome scaling challenges, optimize workflows and streamline edge-to-cloud data transport, enabling real-time analytics and enterprise-wide deployment. For example, a North American automotive manufacturer recently integrated Loopr's AI-powered visual inspection system to automate their final quality checks. This implementation led to improved precision on the production line and a reduction in defect rates. MTEK MTEK Industry AB is transforming digitalization of discrete manufacturing with its Digital Production System and advanced integration platforms. Through collaboration with Microsoft, MTEK has successfully deployed MBrain and the Manufacturing Integration Platform (Mint) in production facilities. Utilizing the full Microsoft stack, including Azure IoT Operations, Dynamics 365, Microsoft Fabric and Teams (to name a few), MTEK achieves IT/OT/human convergence, optimizing operations while reducing environmental impact. MBrain integrates into Azure IoT Operations supporting MQTT and OPC UA, enabling immediate data monitoring and management. Together, Microsoft and MTEK deliver easily integrated data exchange between edge devices and the cloud by supporting real-time analytics and decision-making. Join us at Hannover Messe 2025 to discover how MBrain's real-time data analytics and IT/OT/human convergence empower manufacturers to achieve total value capture. Schneider Electric Schneider Electric enables digital transformation by integrating world-leading automation and energy technologies, endpoint to cloud connecting products, controls, software and services, across the entire lifecycle, enabling integrated company management, for homes, buildings, data centers, infrastructure, and industries. Schneider Electric is partnering with Microsoft to transform manufacturing into an AI-powered, open, software-defined industry. Microsoft's AI, Edge & Cloud patterns are combined with Schneider Electric's advanced, secure, and user-friendly industrial automation edge solution. Join us at HMI 2025 to experience this direct-to-cloud, secure interface that empowers innovative, data-driven approaches to modernize processes and products using AI agents and digital twin solutions with real-time simulation. Siemens Siemens develops technologies that power progress across industrial automation, infrastructure, transportation, and healthcare, with a strong emphasis on digital solutions and sustainability globally. The collaboration with Siemens leverages Siemens Industrial Edge and Microsoft Azure IoT Operations to create integrated, data-driven production environments that address customer pain points. This partnership helps ensure data flow from the shop floor to the cloud, empowering manufacturers to harness advanced technologies like AI and digital twins to streamline their production processes. Learn more about how Siemens and Microsoft are partnering to accelerate IT and OT integration at HMI 2025. Sight Machine Sight Machine’s industrial AI data platform, now deployable at the edge with Azure IoT Operations, unifies real-time production data, enhancing data accessibility and productivity. At the Microsoft booth come and discover how Sight Machine and Microsoft are revolutionizing beverage bottling operations by reducing downtime and increasing availability through real-time plant data, AI-driven insights, and collaboration tools, all powered by Microsoft’s secure, scalable cloud infrastructure. Microsoft fosters collaborative innovation, empowering partners to drive industrial transformation. At Hannover Messe 2025, Sight Machine will also demonstrate its integration with NVIDIA Omniverse, offering real-time 3D visualization, rapid troubleshooting, and root cause analysis. Co-developed by Microsoft, NVIDIA, and Sight Machine, this solution enhances manufacturing performance. Visit the NVIDIA booth to learn more. Symphony AI SymphonyAI revolutionizes the Intelligent Factory with Predictive, Generative and Agentic AI solutions for industrial verticals across manufacturing, consumer goods and energy. Their software drives end-to-end digital transformation from edge to cloud, integrating data sources, contextualizing information, and powering AI-driven applications. At HMI, discover how SymphonyAI’s IRIS Foundry Industrial DataOps platform is extending capabilities to the edge to help manufacturers leverage factory data to expedite AI drive value in maintenance, quality, process optimization, closed-loop operations, and overall plant performance. The new edge capabilities easily and securely connect to factory systems, store and transform data, automate workflows and leverage Azure IoT Operations Dataflows and MQTT Broker to smoothly transport data to IRIS Foundry, unlocking actionable AI for factory operations. Don't miss this opportunity to see how we can transform your operations—join us at HMI for the demo. Learn more AI and the adaptive cloud approach are transforming how industries design, build and operate, driving the next wave of efficiency, agility, and innovation. To fully harness this potential, organizations should embrace a collaborative ecosystem that fosters AI-driven insights, simplified data integration, and secure digital transformation. The future of manufacturing is intelligent, interconnected, and AI-powered—and success depends on a strong partner network, a flexible cloud strategy, and a commitment to open, multi-cloud innovation. By working together, we can accelerate industrial transformation, overcome complex challenges, and unlock the full power of smart manufacturing. Learn more about the adaptive cloud approach and explore comprehensive cloud-to-edge scenarios designed for specific industry needs with Arc Jumpstart Agora.
