Microsoft Defender for Endpoint (MDE) Live Response and Performance Script.
Importance of MDE Live Response and Scripts Live Response is crucial for incident response and forensic investigations. It enables analysts to: Collect evidence remotely. Run diagnostics without interrupting users. Remediate threats in real time. For more information on MDE Live Response visit the below documentation. Investigate entities on devices using live response in Microsoft Defender for Endpoint - Microsoft Defender for Endpoint | Microsoft Learn PowerShell scripts enhance this capability by automating tasks such as: Performance monitoring. Log collection. Configuration validation. This automation improves efficiency, consistency, and accuracy in security operations. For more details on running performance analyzer visit the below link. Performance analyzer for Microsoft Defender Antivirus - Microsoft Defender for Endpoint | Microsoft Learn While performance analyzer is run locally on the system to collect Microsoft Defender Anti-Virus performance details , in this document we are describing on running the performance analyzer from MDE Live Response console. This is a situation where Security administrators do not have access to the servers managed by Infra administrators. Prerequisites Required Roles and Permissions To use Live Response in Microsoft Defender for Endpoint (MDE), specific roles and permissions are necessary. The Security Administrator role, or an equivalent custom role, is typically required to enable Live Response within the portal. Users must possess the “Manage Portal Settings” permission to activate Live Response features. Permissions Needed for Live Response Actions Active Remediation Actions under Security Operations: Take response actions Approve or dismiss pending remediation actions Manage allowed/blocked lists for automation and indicators Unified Role-Based Access Control (URBAC): From 16/02/2025, new customers must use URBAC. Roles are assigned to Microsoft Entra groups. Access must be assigned to device groups for Live Response to function properly. Setup Requirements Enable Live Response: Navigate to Advanced Features in the Defender portal. Only users with the “Manage Portal Settings” permission can enable this feature. Supported Operating System Versions: Windows 10/11 (Version 1909 or later) Windows Server (2012 R2 with KB5005292, 2016 with KB5005292, 2019, 2022, 2025) macOS and Linux (specific minimum versions apply) Actual Script Details and Usage The following PowerShell script records Microsoft Defender performance for 60 seconds and saves the output to a temporary file: # Get the default temp folder for the current user $tempPath = [System.IO.Path]::GetTempPath() $outputFile = Join-Path -Path $tempPath -ChildPath "DefenderTrace.etl" $durationSeconds = 60 try { Write-Host "Starting Microsoft Defender performance recording for $durationSeconds seconds..." Write-Host "Recording will be saved to: $outputFile" # Start performance recording with duration New-MpPerformanceRecording -RecordTo $outputFile -Seconds $durationSeconds Write-Host "Recording completed. Output saved to $outputFile" } catch { Write-Host "Failed to start or complete performance recording: $_" } 🔧 Usage Notes: Run this script in an elevated PowerShell session. Ensure Defender is active, and the system supports performance recording. The output .etl file can be analyzed using performance tools like Windows Performance Analyzer. Steps to Initiate Live Response Session and Run the script. Below are the steps to initiate a Live Response session from Security.Microsoft.com portal. Below screenshot shows that console session is established. Then upload the script file to console library from your local system. Type “Library” to list the files. You can see that script got uploaded to Library. Now you execute the script by “run <file name>” command. Output of the script gets saved in the Library. Run “getfile <path of the file>” to get the file downloaded to your local system download folder. Then you can run Get-MpPerformanceReport command from your local system PowerShell as shown below to generate the report from the output file collected in above steps. Summary and Benefits This document outlines the use of MDE Live Response and PowerShell scripting for performance diagnostics. The provided script helps security teams monitor Defender performance efficiently. Similar scripts can be executed from Live Response console including signature updates , start/stop services etc. These scripts are required as a part of security investigation or MDE performance troubleshooting process. Benefits: Faster incident response through remote diagnostics. Improved visibility into endpoint behaviour. Automation of routine performance checks. Enhanced forensic capabilities with minimal user disruption.Understanding Device Control for macOS in Defender for Endpoint
Step-by-step implementation guide Requirements for Implementing Device Control: Defender for Endpoint or Defender for Business licenses (can be a trial subscription) Minimum OS version: macOS 11 or higher Minimum product version: 101.34.20 The implications of these requirements are that first, the macOS devices need to be onboarded in Defender for Endpoint for the Device Control policies to be enforced, secondly the OS needs to be at certain level or higher and third the minimum product version required, implies that the Defender app needs to be installed on the macOS device. Another aspect to take into consideration is that Defender can be running in active or passive mode for Device Control to work. Check the feature comparison table in this article to view how the Defender for Endpoint features behave when Defender is running active or passive mode. For this guide, I would like to focus on how we implement the policies for Device Control on macOS devices using Microsoft Intune. When deploying Device Control using Microsoft Intune, you have the advantage of using a native platform that integrates with Defender XDR portal and EntraID. Integrating device control into this broader security framework is crucial for maintaining a robust defense against potential threats. Considerations for Device Control to be effective and allow a smooth onboarding of devices: Your MacOS devices must be running at least macOS 11.x or higher. You will need a Microsoft365 subscription to be able to license your devices for Defender for Endpoint. To access and use Removable Storage Access Control, you must have Microsoft 365 E3 or E5. The Defender app needs to be installed and licensed (the device went through the onboarding process) on the macOS device. The main difference between Windows OS devices and macOS devices is that in Windows OS, the Defender application is part of the core OS and in macOS it needs to be installed as a regular application you can install on the device, preferably through Microsoft Intune. After the devices are onboarded in Defender for Endpoint, the devices will appear in EntraID as a synthetic object, meaning that you will see the “join type” field as blank. This allows you to group these devices in EntraID dynamic groups to automate the app deployment process. To enable devices to get endpoint security management settings from either Microsoft Intune or Defender portal, you need to enable to configure your tenant to support Defender for Endpoint security settings management. Older versions of Mac devices’ hardware, as long as they can support macOS 11.x or higher, can run the feature. The performance of the feature will depend on how the hardware performs, due to the fact that it is an outdated device. In order to apply device control policies, the device needs to be onboarded in Defender for Endpoint. Just applying the .mobileconfig file directly to the device or the .json file if using JAMF will not cause any effect on the device. To learn more about the .mobileconfig file and .json file, please refer to these articles. .mobileconfig and .json files. One of the key differences with Device control implementation in other operating systems like macOS is that the configuration is done via Microsoft Intune device configuration profile. This experience is not yet available in Defender portal. This guide applies for macOS devices managed by Intune. To further understand the pre-requisites for Device Control for macOS on Defender for Endpoint, please refer to this article. Process of deploying Defender for Endpoint app on macOS to prepare for device control policies Now, after you get all the pre-requisites aligned and ready to go, it is time to start preparing the environment in Intune for Device Control. Configuration Steps Install Microsoft Defender for Endpoint on macOS: Ensure that Microsoft Defender for Endpoint is installed and running on your macOS devices. You can follow the installation guide available on the Microsoft Learn website. This process is described in Fig.1 2. Build the MobileConfig File: Create a mobileconfig file that includes the necessary groups, rules, and settings for device control. You can use the demo file available on GitHub as a reference:. This file serves as a useful starting point for developing how the policy should function on the device. Validate your policy with the JSON schema to ensure the format is correct: https://github.com/microsoft/mdatp-devicecontrol/device_control_policy_schema.json 3. Deploy the MobileConfig File Using Intune: Sign in to the Microsoft Intune admin center and navigate to Devices > macOS. Select 'Create profile', choose 'Templates', and then 'Custom'. Upload the mobileconfig file you created in the previous step Configure Device Control Policies: Open the Microsoft Intune admin Center and navigate to the Device configuration section. Create a new policy for macOS devices. Specify the types of devices you want to control (e.g., USB drives, external hard drives). Set the permissions for each device type. You can choose to allow, block, or restrict access based on various criteria such as device ID, vendor ID, or serial number. 5. Deploy the Policy: Once the policy is configured, deploy it to the targeted macOS devices. Ensure that the devices are connected to the internet and can receive policy updates from the Microsoft Defender portal or Microsoft Intune. 6. Monitor and Manage Devices: Use the Microsoft Defender portal to monitor the status of connected devices. You can view the Device control report in Defender portal to track device usage and identify any unauthorized access attempts. You can also perform advanced hunting in Defender portal to monitor when a policy was triggered. Below I list a couple of KQL queries that can help with this monitoring. Example 1: Discover if the removable storage policy was triggered: Note: Before running, check spaces and syntax of the query is ok after copying and pasting the query in Advanced Hunting, to prevent errors. //RemovableStoragePolicyTriggered: event triggered by Disk and file system level enforcement for both Printer and Removable storage based on your policy DeviceEvents | where ActionType == "RemovableStoragePolicyTriggered" | extend parsed=parse_json(AdditionalFields) | extend RemovableStorageAccess = tostring(parsed.RemovableStorageAccess) | extend RemovableStoragePolicyVerdict = tostring(parsed.RemovableStoragePolicyVerdict) | extend MediaBusType = tostring(parsed.BusType) | extend MediaClassGuid = tostring(parsed.ClassGuid) | extend MediaClassName = tostring(parsed.ClassName) | extend MediaDeviceId = tostring(parsed.DeviceId) | extend MediaInstanceId = tostring(parsed.DeviceInstanceId) | extend MediaName = tostring(parsed.MediaName) | extend RemovableStoragePolicy = tostring(parsed.RemovableStoragePolicy) | extend MediaProductId = tostring(parsed.ProductId) | extend MediaVendorId = tostring(parsed.VendorId) | extend MediaSerialNumber = tostring(parsed.SerialNumber) |project Timestamp, DeviceId, DeviceName, InitiatingProcessAccountName, ActionType, RemovableStorageAccess, RemovableStoragePolicyVerdict, MediaBusType, MediaClassGuid, MediaClassName, MediaDeviceId, MediaInstanceId, MediaName, RemovableStoragePolicy, MediaProductId, MediaVendorId, MediaSerialNumber, FolderPath, FileSize | order by Timestamp desc Example 2: This query interrogates the DeviceEvents table, searching for “PnP” (Plug n Play) types of action. The field Additional fields provides essential information about the device ClassGUID and what .inf files are part of the driver stack used to perform the action. DeviceEvents | where ActionType contains "PnP" | where Timestamp > ago(30d) | project ActionType, DeviceName, InitiatingProcessAccountUpn, InitiatingProcessAccountDomain, IsProcessRemoteSession, AdditionalFields // the Additional Fields field shows the DeviceGUID, ClassGUID, driver information, etc. In conclusion: In today's fast-paced and mobile-driven world, device control stands out as an essential security feature for organizations and individuals alike. By enabling device control, businesses can ensure a seamless protection experience, safeguarding sensitive data against unauthorized access or potential threats posed by removable and portable devices. Its cross-platform functionality, spanning Windows, macOS, and beyond, highlights its adaptability and relevance in a diverse technological landscape. Furthermore, device control fosters a proactive approach to cybersecurity, by enabling device control, organizations can proactively safeguard sensitive data and mitigate risks before they escalate. Enabling this feature not only strengthens your security posture but also demonstrates a commitment to protecting the integrity and privacy of your systems in an increasingly unpredictable digital ecosystem. Explore additional resources: To further enhance your understanding of the critical role Device Control plays in safeguarding your organization, explore these indispensable resources on Defender for Endpoint. Empower yourself with the knowledge to proactively secure sensitive data, mitigate risks, and stay ahead in an ever-evolving digital landscape. How to deploy Defender app to macOS endpoints using Intune. Implementing device control on macOS guidelines. Defining settings on your mobileconfig file. Best practices to deploy device control for macOS on Defender for Endpoint. FAQ about device control on macOS. How to deploy device control from Defender for Endpoint using JAMF.
