Dec 29 2021 10:11 AM
I am experimenting with WAC, my setup is as follows:
1) HVHOST01 - i7 with 8 cores and 32gb ram running windows server 2022 core and the Hyper-V role
2) Host has 5 total NICs
3) Setup primary nic to 10.0.0.2 with gateway of 10.0.0.1 and DNS of 8.8.8.8
4) Setup virtual switch as a "team" for the other 4 nics
5) Deployed 4 Virtual Machines
- Domain Controller
* DHCP configured for 10.0.0.100 to 10.0.0.200 and successfully handing out addresses
* DNS setup with forwarders configured as 8.8.8.8 and 8.8.4.4
- SQL Server
* Joined to domian
* Assigned static IP of 10.0.0.50
* Has internet access, however, after about 15 minutes the network connection will report No Internet Access
* Only solution is to either reboot the server or disable/enable the virutal NIC
- VMM Server
* Joined to domian
* Assigned static IP of 10.0.0.20
* Has internet access, however, after about 15 minutes the network connection will report No Internet Access
* Only solution is to either reboot the server or disable/enable the virutal NIC
- Verified everytime this happens that the DC is up, all services are working and it still has access to the internet.
I have looked everywhere in WAC to see how I can adjust the NIC card properties of both the HOST and the VM's (i.e. VMQ) and can not find how to do this and have been unable to solve the problem of the network connection losing access to the internet.
Any help is greatly appreciated.
Jan 03 2022 05:55 AM
Jan 22 2022 08:51 AM
Jan 22 2022 01:24 PM - edited Jan 22 2022 01:25 PM
@Harm_Veenstra , None. Internal DNS seems to work just fine, but anything to the internet is "gone" as far as name resolution.
I'm at a loss as to why this is happening as it is only happening to the Virtual Machines, the physical host the VM's run on and of course the physical Domain Controller do not have this issue.
Thoughts?
Jason
Jan 22 2022 01:31 PM
Jan 22 2022 01:33 PM
Jan 22 2022 01:40 PM