SCCM Client showing as "No" or "Not Installed"
Hi After a little support if possible please, We are preparing to upgrade and replace circa 50 PCs in our office. We have prepared a custom build of Windows 11 Enterprise, with all of the required applications installed. We are able to provision a PC via our custom Task Sequence in SCCM, this all works well. However, when the task sequence installs the SCCM client on the PC, the ccmsetup.log reports "CcmSetup is exiting with return code 0" - the Computer registers and is visible within the SCCM console, but, the "Client" column states "No" which would indicate that there is some sort of communication issue from the Client to the SCCM server. Attached is an example of where the newly provisioned PC has had the Client installed, but it does not appear to be communicating to the SCCM server. The same happens even if we uninstall the client via the "ccmsetup.exe /uninstall" command and manually re-install by just running "ccmsetup.exe" This is not all PCs that we are having this issue with. Any pre-existing PCs that were provisioned a couple of years back continue to work and respond ok with SCCM. Attached is an example of a pre-existing PC where the SCCM client is reporting to the server ok : This only appears to be with any PCs we provision recently (we had an in-place server upgrade take place approx 12 months ago and went from MS Server 2016 to MS Server 2019) Would anyone be able to offer any assistance or be able to take a look at any log files to help out? Thanks in advance!
