Tech Community Live: Microsoft Intune
Mar 20 2024, 07:30 AM - 11:30 AM (PDT)
Microsoft Tech Community

PXE booting error 0xc0000098 after upgrade to 2103

Copper Contributor

We have upgraded our SCCM from 2006 to 2103 and now have the following problem

 

When PXE booting to image a computer, we get the following error

 

 

 

Recovery

You PC/Device needs to be repaired

The Windows Boot Configuration Data (BCD) file from the PXE server does not contain a valid operating system entry. Ensure that the server has boot images installed for this architecture.

File: \Tmp\x86x64{file}.bcd

Error code: 0xc0000098

You’ll need to use recovery tools. If you don’t have any installation media (like a disc or USB device), contact your PC administrator or PC/Device manufacturer.

 

 

 

I have tried the following

 

  • Ensured DHCP option 66 to the IP address of SCCM server
  • Ensured DHCP option 67 points to the following
    1. Smsboot\x64\wdsmgfw.efi  for  UEFI x64
    2. Smsboot\x64\wdsnbp.com for BIOS x86 & x64
    3. Smsboot\x86\wdsmgfw.efi  for UEFI x86
  • Updated both ADK and PXE to 2004
  • Redistributed the boot images to distribution points, ticking “Reload this boot image with the current Windows PE version form the Windows ADK”
  • Followed the steps in https://www.prajwaldesai.com/sccm-osd-error-code-0xc0000098/
    1. Remove PXE from distribution point
    2. Uninstall WDS
    3. Rename the RemoteInstall folder to _old
    4. Re-enabled the PXE option
    5. Ensured RemoteInstall folder is re-created
    6. Redistributed the boot images to DP
  • On the Distribution Point, the Communication is set to HTTPS and I have re-imported the Certificate which expires on 24th November 2021 (5 months time)

Is there anything that I am missing or how else do we go about troubleshooting this issue.

 

Thanks

Alastair

3 Replies

Hi @AlastairHill1825  did you solved it ? , im having the same issue  after the upgrade

@IvanTor365 

 

Yes, we did. Unfortunately my memory of what we did has faded over the year.

 

If I remember correctly we changed back from https to http

 

I hope that helps

regards

Alastair

Thanks , I just uninstall the ADK, re import boot images and worked, thanks again