compliance
69 TopicsVerification "Authorized" but Partner Center remains deactivated. No support channel reachable.
We are a company seeking help with a Partner Center account state inconsistency (Seller ID available by direct message to a Community Manager or Microsoft employee). Timeline: - Our Windows Hardware Developer Program enrollment was rejected at the Employment Verification stage. - Microsoft Vetting Operations instructed us in writing to update our profile to a company-owned domain and provide domain registration documentation. We complied fully and same-day: registered and verified a company domain on the enrolling tenant, updated the seller contact and company approver to an address on that domain, and supplied registrar documentation. - The verification pipeline re-ran: Email, Identity, and ultimately all stages completed. Legal Info now shows Verification Status: AUTHORIZED. - However, the Partner Center account itself returns "your Partner Center account has been deactivated" on every workspace — Hardware, Programs, and the support wizard — so we cannot file an in-portal support case from the deactivated account. - Email follow-ups to the Vetting Operations thread and to an assigned Dev Center support engineer have gone unanswered for over a week. We hold multiple correlation IDs (most recent: f4fd02fd-d21f-462f-8765-1ea3d6132ad2, 02 Oct 2026). Our read: the account object was deactivated when the earlier application was closed, and was never re-activated when the verification subsequently authorized — a state inconsistency between the vetting record and the account. Ask: could a Community Manager or Microsoft employee escalate this to the team that can re-activate a verified account? The verification work is complete; only the deactivation flag remains, and it is blocking a driver-signing deliverable. We can provide the Seller ID, case numbers, correlation IDs, and full documentation through any private channel indicated. Thank you. Access restricted We're sorry, you don't have permission to access this page because your Partner Center account has been deactivated. For assistance, please contact your Partner Center administrator or support. Correlation ID: f4fd02fd-d21f-462f-8765-1ea3d6132ad2 Correlation vector: leO3sWI4S0K2fExK.4 Time: 02 Oct 2026 22:36:07 +00:00The Indentity Verification step failed due to Microsoft Trusted IDV AU10TIX issue
JillArmour is there a way to get this resolved? My company has been and still Authorized and Active Microsoft Partner for more than 8 year. Without any reason (no changes to Legal Info, no changes in Primary or Security Contacts, etc.), the Indentity Verification was triggered in Partner Dashboard on June 24, 2026. I followed the steps to verify via Microsoft's only trusted IDV AU10TIX ( https://www.au10tix.com ). The driver's license was correctly OCR-ed, etc. Yet, the VerifiedID that was issued by AU10TIX platform had the Last Name completely missing! As the result the Indentity Verification failed due to a basic name mismatch, the Verification status switched to Rejected, and the Resolve button no longer available for me to retry again. I opened two support tickets already 2606250010001105 (this one was closed without even reading my request details, and I re-opened it again and re-sent the details asking to re-start the Indentity Verification step, so I could retry) and 2606260010001921 (since there has been no reply at all to the first ticket, despite 8 business hours of response SLA that is mentioned in the official support ticket confirmation email) My company's benefits package is up for renewal and we cannot now publish our ISV offering on the Marketplace also. Now, I'm not even sure how the retry is going to work, will the trusted IDV AU10TIX issue a new VerifiedID or it will tell me that it already issued one for that email address...?SolvedURGENT: Blocked from Partner Center Enrollment ("Runs on trust") - Support portals inaccessible
Hello Microsoft Partner Community Team, I am urgently seeking assistance with an automated enrollment block. We are trying to register our business, Connect In Cloud Ltd (UK Companies House: 09550508), for the Microsoft AI Cloud Partner Program, but we have triggered the "Microsoft runs on trust" security block. I am completely unable to raise a standard support ticket because my Partner Center dashboard shows no active workspaces, meaning the support form will not allow me to submit a request. Furthermore, the standard business phone support lines drop the call after instructing me to use the broken portal. I need a moderator to please escalate this directly to the Vetting and Enrollment team so I can provide my business documentation, verify my identity, and have this block cleared. Here are my exact error details from the blocked screen: Error: Microsoft runs on trust... your request was blocked. Reference Number: 715-123160 Transaction ID: 4b89b272-50fe-4f37-8f5f-15f539cbaed0 Correlation ID: f13ebdd3-5d9d-4b45-a31d-0049e3489a11 Thank you in advance for your help in getting an internal support ticket opened for us861Views1like20CommentsMAICPP identity verification stuck "In Progress" — no Resolve action, ticket unanswered 2 weeks
Our Microsoft AI Cloud Partner Program enrollment (İNFRASPRO BİLGİ TEKNOLOJİLERİ TİCARET LİMİTED ŞİRKETİ) has been stuck since 25 Aug 2026. Verification Summary shows Contact = Verified, Identity = In Progress, Business = In Progress (Microsoft Action). The "Action required" banner persists on Legal Info, and clicking "go here" only opens the Verification Summary page — no "Resolve/Start" or "Get verified here" action ever renders under Identity verification for the primary contact (mailto:email address removed for privacy reasons), who holds Global Admin + Compliance Admin. There is no self-service path to obtain or present a verified credential. Support ticket TrackingID#2609020040003471 has gone unanswered for over a week. Requesting a Community Manager to escalate this to the Partner Vetting / Trust & Safety team for manual review and re-issuance of the identity vetting request. I can share Tenant ID, Partner ID, and entity details via DM.Hardware enrollment blocked — requesting manual review
Hello Microsoft Partner Compliance / Verification team, We are a legitimate and established software development company incorporated in the Qatar Financial Centre (QFC) in September 2022. We hold a valid software development license and operate as a real business with a corporate office, an established website, and a portfolio of software products that can be reviewed on our website. Our company is fully identifiable through its corporate and registration information. We are actively developing and distributing our software products and have a genuine business need for the Microsoft Partner Center Hardware program. We are trying to enroll in the Microsoft Partner Center Hardware program because our software products require Windows driver signing. We have already obtained an EV code signing certificate in preparation for this process. As part of the Partner Center enrollment and verification process, our company was successfully identified using its D-U-N-S number, with the corresponding company information listed in the D&B database. Our enrollment request was immediately blocked with the following message: “Microsoft runs on trust. We engage in a rigorous set of evaluation and certification processes; as a result your request was blocked. If you require further information please reach out to Microsoft Support…” Given the information available about our company and its legitimate business activities, it is absolutely unclear to us why the enrollment request was blocked. In particular, we were not asked to provide any supporting documentation or clarification before the enrollment was blocked, so we were not given an opportunity to address any specific concern that may have arisen during the evaluation. As instructed in the enrollment message, we contacted Microsoft Support. We were provided with troubleshooting recommendations, which we followed, but the enrollment remained blocked with the same result. Microsoft Support subsequently confirmed that the Trust-related block remained in place and that our access could not be reactivated at that time. We then sent follow-up questions asking what specifically had caused the issue and whether there was anything we could provide or correct. We did not receive a further response or any notification confirming that the case had been closed. Following Microsoft's troubleshooting recommendations, we subsequently repeated the enrollment. Unfortunately, the same Trust-related block occurred again. We are also currently unable to obtain further assistance through Partner Center Support. When we try to submit a support request concerning the Hardware enrollment issue, the portal returns: “There is a problem submitting your request, try again!”. We tried multiple times over the course of about a week, using different browsers, but received the same error message each time. This leaves us without a clear path to understand or resolve the issue. We fully understand and respect Microsoft's need to conduct appropriate trust, compliance, and verification checks. However, as a legitimate licensed software company with an established business presence, identifiable corporate operations, a portfolio of products, and a genuine need for the Hardware program, we would very much like to understand what specifically is preventing our enrollment. Could a Microsoft Community Manager please help route this matter to the appropriate Partner Vetting / Trust & Safety or Hardware enrollment team for manual review? If there is a specific concern, requirement, or verification issue affecting our company, we are fully prepared to provide the relevant documentation and clarification. We would simply appreciate the opportunity to understand what needs to be addressed rather than having our enrollment blocked without any specific information being provided to us. We are not asking Microsoft to bypass its verification requirements. We are asking for a fair opportunity to complete the verification process and address any concerns that may have resulted in the Trust evaluation decision. Thank you for your assistance.308Views0likes2CommentsError 2100 during MAICPP enrollment – Legal info blank
Issue: I'm stuck at the Agreements step of the Microsoft AI Cloud Partner Program (MAICPP) enrollment. When I click Accept and continue, the page displays: The request could not be completed. No further details are provided (no reference number, no transaction ID). Evidence of orphaned legal entity (error 2100): After the failed submission, I navigated to Settings → Account settings → Organization profile → Legal info, and the page renders only the title and description text—no tabs, no form fields, completely blank (screenshot attached). This matches the documented symptom of error 2100 / orphaned legal entity: the backend created a legal entity record during the first submission attempt, but it was never linked to a program enrollment. Subsequent attempts to accept the agreements fail because the system tries to create a duplicate entity. Environment: Tenant ID: 70a418c9-dca7-4bf3-90b0-765294ae60aa Verified domain: http://myclaw.ai/ Publisher name: MyClaw Account type: Company Submitting user role: Global Administrator Target program: Microsoft AI Cloud Partner Program (MAICPP) Goal: Obtain Partner ID → apply for Verified Publisher in Entra ID Already tried: Clearing cache, incognito mode, different browsers – no change Checked Identifiers page – also blank (no Partner ID, no publisher table) Cannot use the standard support form (requires a workspace, which I don't have until enrollment completes) Cannot use the no-login support form (Submit button fails) Request: Please manually clear the orphaned legal entity record or link the existing entity to the MAICPP enrollment, so I can complete the registration. Attached screenshots: "The request could not be completed" error at the Agreements step Legal info page rendering no tabs Thank you.Partner Center enrollment blocked – 715-123160 – requesting manual review
Our Microsoft AI Cloud Partner Program enrollment was blocked by the automated trust filter. Reference number: 715-123160. Correlation ID: 60efdff8-0e40-4745-8d33-d7b950000571. Company: Newox Group AB (Sweden), org. no. 559318-6280, trading as Aida Labs (aidalabs.io). Tenant domain: aidalabs.io (verified). We are an ISV building a B2B analytics SaaS with a planned Microsoft Teams integration. Since no workspace was created, we cannot open a ticket in Partner Center, and the Swedish support phone numbers listed in the M365 admin center do not connect. Please route this to the Partner Center vetting team for manual review. We can provide our company registration certificate immediately.Seller verification Rejected at Employment step — no email received, no appeal (ID 94611890)
Our Partner (MAICPP) verification completed successfully on 31 Aug 2026 — contact, identity (Verified ID) and business all Verified (Partner ID 7113511, DIGITAL QAZAQSTAN LTD, UK company no. 17178943). The Developer/seller verification for the same legal entity (Seller ID 94611890) is closed as "Rejected — no appeals available", stuck at "Employment Verification — Pending Partner Action" with an estimated date of 06.09.2026 still showing. No verification email or action request was ever received at the primary contact (monitored, junk folder included), and the closed page shows no Fix now / appeal / upload control. Root cause we identified: the seller profile contained an outdated registered address. It has been corrected and now matches Companies House exactly (Office 393, Unit 5, 399-405 Oxford Street, Mayfair, London W1C 2BU). Business verification documents show "Provided". A fully prepared transactable professional service offer is blocked from publication only by this verification. Could a Community Manager please escalate this to the Partner Vetting team to reopen or reinitiate the seller verification?Commercial Marketplace enrollment blocked – Trust Code 715-123160
Hello Microsoft moderators, My Commercial Marketplace enrollment is blocked with Reference 715-123160. I am the Global Administrator of my Microsoft Entra tenant and the owner of a Udyam-registered sole proprietorship (AK Sentinel Studios, India). Can anyone please hell me to solve the enrollment issue Thank you.Enrollment blocked by trust evaluation (Ref 715-123160) — cannot open a support ticket, no workspace
I am trying to enroll in the Microsoft 365 and Copilot program to publish a Word add-in on AppSource. The enrollment is blocked with the "Microsoft runs on trust" message. It happened twice, on 7 August and 18 August 2026, with the same reference number — so the first block was apparently never cleared. Reference number: 715-123160 Transaction ID (18 Aug): 05e34bf1-3406-4d55-abce-260567e369af Transaction ID (7 Aug): b809228d-bdec-436d-a205-de4914cef0e0 Correlation ID: c0187e32-891c-4c53-9964-cc5c9c6a1a17 I cannot open a support ticket: the Partner Center form requires selecting a Workspace, and my account has none because no enrollment ever completed. The public support form sends me back to Service health. Could this be escalated to the Vetting / Trust & Safety team for a manual review? My company registration number and official registration extract are ready — I will provide them privately on request. Thank you.