New pc wont boot.

[LiamThompson]

I bought a pc with no o/s,i have two drives that work/boot on my current pc w10 + w11,i instaleld one at a time both wont boot,i get as far as the windows log then it stalls. Ive made a usb bootable via windows,didnt work,i used an iso didnt work?

The bios see all the drives ive had and it sees the usb.
I also installed a graphics card before booting up,would it make any difference if i took it back out and tried to boot up?

Any help would be appreciated.
thanks

[#2]

@LiamThompson 

There are a few steps you can take to troubleshoot and resolve the issue with your new PC not booting. Here is a approach:

1. BIOS Settings

• Boot Order: Ensure the correct drive or USB is set as the first boot device.
• UEFI vs. Legacy: Check if your BIOS is set to boot in UEFI mode or Legacy mode. This should match the mode used when the OS was installed.

• If the drives were set up using UEFI, make sure the BIOS is in UEFI mode.
• If the drives were set up using Legacy (BIOS) mode, make sure the BIOS is set to Legacy mode.

1. Repair Windows Boot

• Windows Installation Media: Use a Windows installation USB to attempt a repair.
1. Boot from the Windows installation USB.
2. Select your language preferences, and then click Next.
3. Click Repair your computer in the lower left corner.
4. Select Troubleshoot > Advanced options > Startup Repair.
5. Follow the prompts to repair your installation.

Detailed Steps for Clean Installation

1. Create a Bootable USB Drive:

• Use the Windows Media Creation Tool to create a bootable USB drive.

1. Boot from USB:

• Insert the USB drive into the new PC.
• Restart the PC and enter the BIOS/UEFI settings (usually by pressing a key like F2, F12, DEL, or ESC during startup).
• Set the USB drive as the first boot device.

1. Install Windows:

• Follow the on-screen instructions to install Windows.
• Choose the custom installation option to select the drive where Windows will be installed.

Additional Troubleshooting Tips

• Reset BIOS/UEFI to Defaults: Sometimes resetting the BIOS to its default settings can resolve boot issues.
• Update BIOS: If a newer version of the BIOS is available, updating it might help with compatibility issues.

If problems persist, there might be a hardware fault, and seeking assistance from a professional or the retailer where you purchased the PC might be necessary.

My answers are voluntary and without guarantee!

Hope this will help you.

Was the answer useful? Mark as best response and Like it!

This will help all forum participants.