Deploying and running the AIP scanner
Installing an AIP scanner node
In this article we would like to summarize what we know about the AIP scanner and share lessons learned while helping our enterprise customers deploy the AIP scanner to their production environment. Our intent is to help you avoid possible pitfalls and help make their UL AIP Scanner implementation easier, faster, and get the most out of their investments.
We will keep this post updated as new features and capabilities of the AIP scanner become available. We encourage you to bookmark this page and come back regularly.
Note: In this article we cover only the Unified Labeling (UL) AIP scanner since this is the recommended solution
for all new deployments.
Let’s start off by reviewing the scanner related terminology.
The following diagram represents a production AIP scanner deployment architecture of a fictious company which has two data centers: one in the USA and one in Europe. It also depicts the most recommended design and implementation approach based on our experience working with enterprises of all sizes around the world.
There might be a variation of this architecture depending on whether you want to utilize your existing SQL environment or deploy dedicated SQL servers for the AIP scanner clusters.
To minimize network performance impact on the scanning process, it is highly recommended to install the scanner nodes as physically close to data sources as possible.
Based on experience gained while helping our customers successfully deploy the AIP scanner at scale, we recommend that all new implementations are planned with the “Crawl, Walk, Run” strategy in mind.
Crawl: Use the network discovery to create a list of available network shares. Don’t attempt to scan your company’s entire set of file shares or encrypt files on your first attempt. Instead, first focus on discovery of a smaller data repository with a well-known set of files. Perform an initial discovery scan to determine what kinds of sensitive information types a new data store might contain. The AIP scanner has an option to discover all sensitive information types without having to configure any labels – a key feature when you need to scan large amounts of disparate data.
Walk: Review the results of your initial scans with the appropriate data custodian to identify false positives and fine-tune the data store’s search parameters. Select the sensitive information types you’re interested in and then map them to any custom labels that are relevant for the data store. After your information types and labels are set correctly, you can elevate your scan actions from simple discovery to programmatically applying labels to the files that need them. You can also change the labels of those files that appear to be incorrect.
Run: When you’re comfortable with the efficacy of the labels that are being applied to your data store, work with your data custodian and other stakeholders to onboard additional data stores and determine which files, if any, should be automatically encrypted during subsequent scans.
Hardware and software requirements for the AIP scanner deployment components are very well documented here. Latest versions of the scanner allow you to tweak scanners performance by limiting CPU consumption and number of simultaneously scanned files.
“How many nodes do we need to scan XX shares and YY SharePoint sites containing ZZZ TB of data?” - is arguably the most asked question we hear when we talk about the AIP scanner deployment.
While there is no precise answer to this question, we have created a calculator (an excel spreadsheet you can find attached to this article below) that can give you a rough estimate based on your sample test results and objectives. There are many variables to keep in mind that may affect the results, such as the scanner servers’ specifications, network and storage performance, etc. To help you better understand how to use the calculator, let’s review the following example together.
For this test we created a cluster with a single node, and we used a file share located on the same network containing 100GB of different file types.
These results tell us that:
You can find scan duration in either the Azure Portal or in the scan summary file on the scanner server itself:
This information gives us an idea of our scans’ performance:
Our next step is to decide what is more important for us to find out given our current business objectives and/or limitations:
Let’s say we have 100TB of initial data and our information workers produce additional 10GB every day. We have decided to deploy 10 scanner nodes for our initial full scan and keep just 4 nodes for subsequent incremental scans.
Considering these inputs and our scan rates we can estimate duration of the scans.
Let’s say we have 100TB of initial data and our information workers produce additional 10GB every day. We need to ensure that our initial scan won’t take longer than 5 days for just a discovery scan, and no longer than a month if you decide to label and protect files.
Considering these inputs and our scan rates we can estimate number of nodes required to complete the scans in time.
The calculator would do all the math for you based on your inputs. But once again, we would like to iterate that these calculations are approximate and your mileage might vary.
Depending on your deployment scenario and your organization’s security requirements you might need to create and use several user accounts to install, configure, maintain, and use the AIP UL scanner.
User account for scanner installation and configuration. This is an Active Directory account used to install the AIP scanner binaries on a Windows Server and run the installation scripts. This account needs to have the following permissions:
Service account for the scanner service. This is an Active Directory account used to run the AIP scanner service and access the data repositories. This account has the following requirements:
Cloud account. This is an Azure Active Directory (AAD) account that can either be a synchronized from on-premises Active Directory or a cloud-only account. This account needs to be added to a label policy that publishes all labels you intend to use for scanner content scan jobs. It’s highly recommended to create a dedicated policy and scope it to just this cloud account.
Important: We currently do not support Multi-factor Authentication (MFA) for this account. Please exclude it
from any enforcement policies you might have in place.
Note: To be able to access and inspect (and optionally change or remove protection) already protected files,
the scanner cloud (AAD) account would need to get the super user roles assigned.
Network discovery service accounts:
User account for the Network Discovery service installation. This is an Active Directory account used to run the service installation command. This account needs to have the following permissions:
When you install the Network Discovery service you need to provide the following Active Directory credentials:
Please review our previous blog post that covers the installation process in very details. Here we are just going to highlight installation nuances you need to be aware of.
Note: Please avoid using “-“ (hyphen) sign in a cluster name. There is a known issue that will be fixed
in the next release of the AIP scanner.
If you know all the locations where your sensitive data can possibly reside, that is great, you can just add those shares to the content scan jobs and the scanner will do the rest. But what if you do not have this visibility? What if no one in your organization remembers about those file servers you adopted as part of that merger 3 years ago?
This is exactly when one of the latest scanner features – network discovery - comes in handy. It allows you to scan your local network, discover file shares, and report on their accessibility (Share and NTFS permissions). The resulting list can be analyzed by the administrators and added to the existing content scan jobs for a subsequent content analysis (inspection, labeling, protection).
Let’s review the installation and configuration process.
Note: One of the pre-requisites for using the network discovery feature is to have AIP Analytics configured. While
this is not a hard requirement, it is highly recommended to have to in place to be able to use all the features
available. If you can’t enable AIP Analytics in your tenant, you still can run the scans, but you will have to use
locally generated log files to review the scan results.
First, you need to decide which servers you would like to use for network scanning. This is very important because you would need to coordinate this decision with other teams, as scanning will likely require changing firewall rules, configuring IDS/IPS and other security tools which otherwise might generate a lot of security alerts. It’s possible to use your existing scanner nodes as well.
You can install the network discovery service on more than one server to enable fault tolerance, but, unlike the situation with content scan jobs when all active nodes share the load and scan simultaneously, only one node scans the network at any given time (aka “active-passive” configuration).
Once you have identified servers, you need to download and install the latest AIP client and scanner installation package from here and you need version 2.8.85 or later. The next step is to install the AIP Network Discovery service.
Please review our documentation for details. Here is an example of the installation script (we discussed accounts needed for this service earlier):
$ServiceAccount = Get-Credential contoso\svc_aipscanner_us $ShareAdminAccount= Get-Credential contoso\share_admin_us $StandardUserAccount= Get-Credential contoso\standard_user_us Install-MIPNetworkDiscovery -SqlServerInstance AIPSCNRSQL -Cluster AIPSCANNER_PROD_US -ServiceUserCredentials $ServiceAccount -ShareAdminUserAccount $ShareAdminAccount -StandardDomainsUserAccount $StandardUserAccount
After that you should be able to see your newly registered server on the “Nodes” dashboard warning about a missing network scan job.
Our next step is to create one and assign it to the appropriate cluster.
Note: When you run a network scan for the first time, a new table (NetworkScan_CL) is created in the Azure Log
Analytics Workspace you have configured for AIP Analytics, so it might take up to 24 hours before you can see
the scan results on the “Repositories” page. All subsequent scan results should be available in a matter of minutes.
Once the network scan job is complete, you can review the scan results on the “Repositories” dashboard.
And with just few clicks you can easily add desired repositories to a content scan job for a subsequent content inspection and classification. When you do that, ensure that the scanner has required access to that repository (you might need to enable “Scanner Access” column to see this information), “Read” for just inspection, or “Read & Write” if you are planning to apply labels to the content in that repository.
As we mentioned earlier, if you can’t enable AIP Analytics in your tenant, you still can run network scans, but in this case, you would need to use local log files to see the scan results. Here is an example:
Even though creating and configuring a content scan job is a pretty straightforward process, you may find some settings a little confusing, let’s try to make this clearer.
Schedule: Manual vs Always. This options allows you to control behavior of your content scan jobs, whether they are going to scan configured repositories continuously or the administrators will have to initiate the scans manually. If it is configured as “Always”, the scanner process crawls all jobs’ repositories looking for new or changed files. Once it reaches the last file of the last repository, it starts this process again. That means that discovery of a new file depends on a number of repositories, the scan performance, number of changes users make to the content of those repositories, as well as where the crawler was, in terms of list of repositories, when the file was created/updated.
Info types to be discovered: Policy only vs All. This option allows you to configure what Sensitive Information Types (SITs) you are interested in scanning your documents for. “All” refers to 100+ built-in Microsoft provided SITs, as well as your own custom ones. “Policy only” means the scanner should be searching for only SITs you have defined in auto-labeling conditions for the labels published to the scanner account. It’s recommended to use “All” to automatically include all newly added/created SITs in the scan.
Treat recommended labeling as automatic. When you create a sensitivity label, you have an option to configure auto-labeling to either automatically apply a label when certain conditions are met, or recommend the users to do that. Since the scanner runs in non-interactive mode, you have an option to configure the scanner to automatically apply a label, even though it was configured to “recommend” in the label properties.
Policy enforcement. If set to “Off” the scanner won’t apply any label or protection (a.k.a. “what-if” mode). This is a good options for the discovery phase when you just want to understand what sensitive information you have and where. “On” tells the scanner to apply, based on other options, either a default label or labels published to the scanner account.
Label files based on content allows you to either apply a default label without content inspection, or inspect files for the condition (SITs) you have specified for your labels.
Default label. It is possible to apply a default label specified in the policy or a custom one to all unlabeled files within a repository. It can also be used in combination with the previous option to apply a default label to the files that do not fall under autoclassification conditions.
Relabel files. This option allows the scanner to change labels of the previously labeled files. To change a label with protection the scanner service account might need to be assigned the super user role.
Currently you can create and assign only one content job per cluster. However, most settings specified for a scan job can be customized at the repository level that gives you flexibility to configure different rules for different repositories within the same content scan job.
Now let’s review several examples of different combinations of these settings and what the expected outcome of a scan would be.
It is highly recommended to always update your scanners to the most recent version.
Important: During the update process the SQL DB schema may get updated as well. Thus, the only supported scenario is
to keep all nodes of the same cluster at the same version level.
Note: Please use this article to find out what the most recent version is, what is new, and what has changed.
The update process is straightforward and involves the following steps:
1. Identify clusters/nodes that require an update.
2. Stop the AIP scanner service on all nodes of the cluster.
3. Download and install the latest generally available (GA) AIP client version.
4. Update configuration and database by running the following PowerShell command, please make sure that you use the proper cluster name that was used during the scanner installation:
5. Start the AIP scanner service.
6. Repeat steps 3-5 for all nodes of the cluster.
7. Review the update status in the Azure Portal.
You can find more information on the update process in our documentation.
When it comes to reporting, there are two options available: AIP Analytics and local log files on the scanner server itself.
AIP Log Analytics.
Managing data, especially terabytes or even petabytes of unstructured data can be daunting. Using the AIP Log Analytics workspace makes managing your important data more achievable. Please take a moment to review our official documentation on central reporting for AIP.
Data that you scanned using the AIP UL Scanner from your on-premises file shares and SharePoint on-premises repository can be aggregated and displayed in the analytics reports. With the data being sent to AIP Log Analytics, administrators can now visualize the risk of their data and see recommendations based on content. It highly recommended to have AIP Analytics enabled to gain visibility to your environment. Please review the required permissions to access AIP Log Analytics.
Before you can see data in your Analytics workspace, it is a prerequisite to configure your workspace. There is a cost associated with utilizing the workspace based on amount of data uploaded and the retention period.
The AIP UL scanner sends information that has been collected to Log Analytics every 5 minutes so that you can view your results in near real time. By default, AIP Log Analytics collects sensitive information type whether it is custom or predefined. If you are interested in finding the content matches, you will have to enable this by clicking “Enable deeper analytics into your sensitive data” within the Azure Information Protection blade in the Azure Portal.
Note: It is important to note that administrators should check their regulations and privacy policies before turning
on this feature within their production environment.
Note: Information that is being collected and sent to the AIP Log Analytics workspace can found here
As your data is being scanned by the AIP UL scanner, you will start see data being populated in your Log Analytics workspace. This workspace provides several pages that administrator can use to deep dive into their data: Usage report, Activity logs, Data discovery, and Recommendations.
Administrators have the option to scope their data using the built-in filter feature within log Analytics or they can go a step further and write their own Kusto Query Language (KQL) query within the console. Azure Information Protection tables are stored under InformationProtectionLogs_CL in Log Analytics. Once you have created your own custom query, you are able to export your data to a .csv file or PowerBI.
As previously mentioned, it’s recommended to use AIP Log Analytics. For administrators that have not configured Log Analytics or using the scanner in offline mode, they can also look at the report generated by the AIP UL scanner locally.
Once a scan is completed, administers can review the results from the AIP Scanner in the %localappdata%\Microsoft\MSIP\Scanner\Reports folder. This folder contains a .txt and .csv file.
The .txt file includes information about how long the scan took, the number of files that were scanned, and how many files matched based on the sensitive information types matched. The .csv have more details such as:
Previous summaries will be stored in a compressed zip folder.
Q: What kind of license is needed to benefit from the AIP scanner?
A: Please review our documentation to make sure you are properly licensed to take full advantage of the AIP scanner capabilities.
Q: Is it possible to run a manual content scan on a schedule?
A: If you want to only run scans outside of working hours or on weekends, to minimize potential impact on users productivity, you can create a schedule task and run PowerShell command Start-AIPScan. Just make sure the scanner service account has “Log on as a batch job” user right on the scanner server.
Q: Is it possible to install the scanner using a non-standard SQL port?
A: If your organization for some reason uses a non-default SQL port, e.g. 50000, the install command would be: Install-AIPScanner -SqlServerInstance “AIPSCNRSQL.contoso.com,50000” -ServiceUserCredentials $ServiceAccount -Cluster AIPSCANNER_PROD_US
Q: Can I use Azure SQL as a database backend for the AIP scanner?
A: AIP scanner works on SQL Enterprise, SQL Standard and SQL Express editions. It is highly recommended to install SQL Enterprise or Standard edition in a production environment and SQL Express edition in a test environment. Scanner supports both named & single instance; supports SQL hosted on windows failover cluster (active passive). Azure SQL is not supported at this point.”
Q: Is it possible to scan “cold” storage?
A: If you would like to scan file shares residing on a storage solution that offers different access tiers (hot, cold, archive, etc.) you need to keep in mind that the AIP scanner requires access to a file in order to scan its content. Rehydrating files from the archive tier can take time and significantly affect the scan time and storage access/usage cost.
You can skip such files by configuring the scanner’s label policy advanced settings.
Q: What kinds of files can I scan and what types of sensitive information can I identify?
A: You can find the full set of instructions on which files are included and excluded for scanning, along with inspection and more in our documentation.
Q: Can the scanner be used for scanning cloud repositories as well?
A: The AIP Scanner specifically scans your on-prem repositories such as SMB File shares and SharePoint Servers on-prem. For cloud-scanning please consider using MCAS file policies or service side auto-labeling for SPO.
Q: Can I identify sensitive information types outside of the out of the box list for the AIP Scanner?
A: You can leverage out-of-the-box sensitive information types as well as custom M365 regex patterns and keywords.
Q: So, I’ve scanned my on-prem repos and found the sensitive information in my environment...what now?
A: Discovering your data is the first step to the information protection framework of knowing your data, protecting your data, and governing your data. Once you have this information, it can then inform how your classification taxonomy should be structured, how the scope is determined, what a label means from a business standpoint, etc. This action of determining policy then moves into the technology implementation that reflects this using AIP/MIP where you can utilize other capabilities to secure your information worker data.
Q: How can I troubleshoot any issues or problems with my scanner deployment?
A: The best way to approach this is to make sure you are first leveraging a modern version of the UL Scanner that has the Start-AIPScannerDiagnostics PowerShell cmdlet. Please ensure you are utilizing the most modern scanner version when possible to avoid any issues.
P.S. Consider joining our Yammer community where you can be one of the first to learn about MIP news, announcements, preview programs, meet information protection experts from around the world, and get your questions answered.