Jul 02 2020 11:32 PM
In Outlook 365 werden verschiedene E-Mail-Accounts verwendet, u. a. ein Hotmail-Account mit verschiedenen Aliase für private Zwecke. Bei der Umstellung von Office 2016 auf Office 365 und der Neueinrichtung des Hotmail-Kontos kamen alle Aliase automatisch rüber bzw. werden in einer neuen E-Mail im "Von"-Feld als Dropdown angezeigt. Wenn ich aber über einen outlook.de-Alias bzw. alles außer dem Ur-Hotmailaccount eine E-Mail verschicke, kommt als neue Mail die folgende Fehlermeldung vom Exchangeserver zurück:
-----
Ihre Nachricht hat einige oder alle Empfänger nicht erreicht.
Betreff: test
Gesendet am: 03.07.2020 08:18
Folgende(r) Empfänger kann/können nicht erreicht werden:
Gaetan Roy am 03.07.2020 08:18
Diese Nachricht konnte nicht gesendet werden. Sie besitzen nicht die Berechtigung, die Nachricht im Auftrag des angegebenen Benutzers zu senden.
__________________________________________________
Diagnoseinformationen für Administratoren:
__________________________________________________
Der Fehler lautet [0x80070005-0x000004dc-0x00000524].
Exchange-Antwortkopfzeilen:
request-id: 39685edf-decb-44cb-a11a-ee54ee42d659
X-ServerApplication: Exchange/15.20.3153.028
X-FEServer: ZR0P278CA0046
X-BEServer: AM0PR0502MB3796
X-CalculatedBETarget: AM0PR0502MB3796.eurprd05.prod.outlook.com
X-RequestId: {B5122C5F-4A86-4AAE-8FE6-52C701F3D8AB}:27
X-ClientInfo: {12433676-A61E-4E27-A4A3-183D482B60E5}:11080067
X-ElapsedTime: 1527
X-BackEndHttpStatus: 200
X-ResponseCode: 0
X-DiagInfo: AM0PR0502MB3796
X-RequestType: Execute
__________________________________________________
ROPs-Zusammenfassung:
0: ropSetProps (10) verarbeitet (1) abgeschlossen (0)
ROP-Ergebnis: 0
Antwortcodes: 0
1: ropSetProps (10) verarbeitet (1) abgeschlossen (0)
ROP-Ergebnis: 0
Antwortcodes: 0
2: ropSetProps (10) verarbeitet (1) abgeschlossen (0)
ROP-Ergebnis: 0
Antwortcodes: 0
3: ropFlushRecipients (14) verarbeitet (1) abgeschlossen (0)
ROP-Ergebnis: 0
Antwortcodes: 0
4: ropSetProps (10) verarbeitet (1) abgeschlossen (0)
ROP-Ergebnis: 0
Antwortcodes: 0
5: ropTransportSend (74) verarbeitet (1) abgeschlossen (0)
ROP-Ergebnis: 0
Antwortcodes: 1244
__________________________________________________
Antwortausnahmen:
ROP-Index: 5
ROP zugeordnet: ropTransportSend (74)
Microsoft.Exchange.Data.Storage.SendAsDeniedException: Can't transport send message. ---> Microsoft.Mapi.MapiExceptionSendAsDenied: MapiExceptionSendAsDenied: Unable to transport send message. (hr=0x80070005, ec=1244)
Diagnostic context:
Lid: 35250
Lid: 36674 dwParam: 0xA
Lid: 61250 dwParam: 0x0
Lid: 45378 dwParam: 0x2
Lid: 44866 dwParam: 0x1D7
Lid: 36674 dwParam: 0xE
Lid: 61250 dwParam: 0x0
Lid: 45378 dwParam: 0x1DC
Lid: 44866 dwParam: 0x183
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=960]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=148][latency=0]
Lid: 52176 ClientVersion: 15.20.3153.28
Lid: 50032 ServerVersion: 15.20.3153.6028
Lid: 35180
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 27962 ROP: ropFlushRecipients [14]
Lid: 31418 --- ROP Parse Done ---
Lid: 35250
Lid: 36674 dwParam: 0xA
Lid: 61250 dwParam: 0x0
Lid: 45378 dwParam: 0x2
Lid: 44866 dwParam: 0x18
Lid: 36674 dwParam: 0x4A
Lid: 61250 dwParam: 0x0
Lid: 45378 dwParam: 0x1D
Lid: 44866 dwParam: 0x0
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=126]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=456][latency=7]
Lid: 52176 ClientVersion: 15.20.3153.28
Lid: 50032 ServerVersion: 15.20.3153.6028
Lid: 35180
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 27962 ROP: ropTransportSend [74]
Lid: 17082 ROP Error: 0x4DC
Lid: 44949
Lid: 21921 StoreEc: 0x4DC
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 38698
Lid: 37692
Lid: 44092
Lid: 64952 StoreEc: 0x3EB
Lid: 40748 qdwParam: 0xB01000000000001
Lid: 57132 qdwParam: 0x0
Lid: 36423
Lid: 42092 StoreEc: 0x4DC
Lid: 33900
Lid: 45434 Guid: 0006bffd-db77-9e48-0000-000000000000
Lid: 10786 dwParam: 0x0 Msg: 15.20.3153.028:AM0PR0502MB3796:08c8aa6b-8155-43ee-9dc1-cbfed1213dde
Lid: 51330 qdwParam: 0x8D81F18CEE71DA9
Lid: 39570
Lid: 55954 dwParam: 0xA
Lid: 49266
Lid: 33010 dwParam: 0xA
Lid: 54258 Error: 0x0
Lid: 40002
Lid: 56562 dwParam: 0x0
Lid: 64146 dwParam: 0x4A
Lid: 33010 dwParam: 0x4A
Lid: 54258 Error: 0x4DC
Lid: 1750 ---- Remote Context End ----
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0x4DC
Lid: 34722
Lid: 51106 StoreEc: 0x4DC
Lid: 41890
Lid: 58274 StoreEc: 0x4DC
Lid: 59285
Lid: 46997 StoreEc: 0x4DC
at Microsoft.Mapi.MapiExceptionHelper.InternalThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, Int32 ec, DiagnosticContext diagCtx, Exception innerException, MapiStore mapiStore)
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, IExInterface iUnknown, Exception innerException, MapiStore mapiStore)
at Microsoft.Mapi.MapiBase.ThrowIfError(String message, Int32 hr)
at Microsoft.Mapi.MapiMessage.TransportSendMessage(PropValue[]& propsToReturn)
at Microsoft.Exchange.Data.Storage.MapiAccessor.TransportSendMessage(Object mapiObject, ExTimeZone timezone, PropValue[]& mapiPropValues)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MapiAccessor.TransportSendMessage(Object mapiObject, ExTimeZone timezone, PropValue[]& mapiPropValues)
at Microsoft.Exchange.Data.Storage.CoreItem.TransportSend(PropertyDefinition[]& properties, Object[]& values)
at Microsoft.Exchange.Data.Storage.Items.ControlFlowCoreItemDecorator.TransportSend(PropertyDefinition[]& properties, Object[]& values)
at Microsoft.Exchange.RpcClientAccess.Handler.Message.TransportSend()
at Microsoft.Exchange.RpcClientAccess.Handler.RopHandler.<>c__DisplayClass154_0.<TransportSend>b__0()
Transport-Send-Fehler: Fehleraufzählung (25), HResult (0x00000000), EC (1244).
Transport-Send-Fehler: Fehleraufzählung (22), HResult (0x00000000), EC (1244).
Submit-Message-Fehler: Nachrichten-ID (11), Fehleraufzählung (13), HResult (0x80070005), EC (1244).
----
Meine Frage: Warum wird dies blockiert bzw. was muss ich anders einstellen?
Beste Grüße
Gaetan