We have upgraded our SCCM from 2006 to 2103 and now have the following problem
When PXE booting to image a computer, we get the following error
Recovery
You PC/Device needs to be repaired
The Windows Boot Configuration Data (BCD) file from the PXE server does not contain a valid operating system entry. Ensure that the server has boot images installed for this architecture.
File: \Tmp\x86x64{file}.bcd
Error code: 0xc0000098
You’ll need to use recovery tools. If you don’t have any installation media (like a disc or USB device), contact your PC administrator or PC/Device manufacturer.
I have tried the following
- Ensured DHCP option 66 to the IP address of SCCM server
- Ensured DHCP option 67 points to the following
- Smsboot\x64\wdsmgfw.efi for UEFI x64
- Smsboot\x64\wdsnbp.com for BIOS x86 & x64
- Smsboot\x86\wdsmgfw.efi for UEFI x86
- Updated both ADK and PXE to 2004
- Redistributed the boot images to distribution points, ticking “Reload this boot image with the current Windows PE version form the Windows ADK”
- Followed the steps in https://www.prajwaldesai.com/sccm-osd-error-code-0xc0000098/
- Remove PXE from distribution point
- Uninstall WDS
- Rename the RemoteInstall folder to _old
- Re-enabled the PXE option
- Ensured RemoteInstall folder is re-created
- Redistributed the boot images to DP
- On the Distribution Point, the Communication is set to HTTPS and I have re-imported the Certificate which expires on 24th November 2021 (5 months time)
Is there anything that I am missing or how else do we go about troubleshooting this issue.
Thanks
Alastair
