keybord is working ok but no functioning in some certain app need shortcut key as function. like afterEffect when i need to use keyboard "u" to call out function then the keyboard is no functioning. and sometime will call out this bar. ... View more

I use RD from MACOS Version 14.0 (23A344) Sonorama. Everything worked correctly until the update, after it, the microphone when used from Teams works for a few seconds and after that a message appears saying the microphone does not work. The video, clipboard and other elements work without problems but the microphone does not, If from MACOS I try to measure the isolation level of the microphone, it still does not work. This is very important to me since my job depends on the microphone working to a local machine via RDP.   ... View more

Some questions and suggestions for using Microsoft Remote Desktop 1. It is suggested that the client of computer and mobile phone (or tablet) can increase the integration of "Wake On Lan" remote network wake up function, so that it is more convenient to use 2. When the client of mobile phone (or tablet) uses Microsoft remote desktop with external keyboard, once you enter letters or numbers, an arrow will pop out in the middle of the screen, and the bottom part of the screen is stuck, so it cannot refresh the display. You must hold down the middle arrow of the screen and drag it upward to display the bottom part that cannot refresh the display (see the picture for details).  3. It is suggested that the computer and mobile phone (or tablet) client can add the function of customized screen resolution and aspect ratio, because the resolution and aspect ratio of different client devices are different, and the resolution and aspect ratio of the server computer are not matched, resulting in the desktop icon will be reordered when the client remote desktop connects to the server. Or the server computer has desktop beautification software when the desktop will be garbled, affecting the use of experience, I hope to improve 4. It is recommended that the computer and mobile phone (or tablet) client can increase a variety of higher screen refresh rate and screen picture quality and screen code rate, so that users with higher network bandwidth have more diversified choices I hope you can adopt all or part of my comments. Thank you very much ... View more

After pressing Ctrl+C to copy to clipboard, or Ctrl+V to paste, the app where I pressed the shortcut hangs for several seconds. I've observed Ctrl+C hang inside the machine I remoted into, and Ctrl+V hang in the physical machine I'm on.   I've observed that both on macOS and Windows (10 and 11). The target machine is always Windows 11, and I'm remoting into DevBox (devbox.microsoft.com). On Mac I also have Parallels Toolbox with Clipboard History, not sure if that matters. The target machine is almost always plain vanilla DevBox with little to no modifications.   The hang happens when the app calls into the OS Clipboard APIs. Usually 2-3 seconds, but sometimes up to 5-10 seconds?? ... View more

It's not possible to update from Outlook Win32 to Monarch on Azure Virtual Desktop. For the intended purposes using the OWA client doesn't resolve.   Once you toggle the pop up displays it's downloading, but stays there forever. ... View more

It would be nice to be able to export or import RDP profiles from all of my devices without having to re-enter everything on other devices. ... View more

I can type english with no problem but there is a bug when I use korean keyboard like this I can type ㅇㅇㄹㄷㅇㅁㄷㅇㅇㄴㄷㅊㄴㄷㄹㅇㄴㄴㅁㅈ only or ㅏㅣ;ㅓㅐㅑㅣㅏㅜㅑㅗㅑㅐㅗㅗ only but I can type with above two things simultanouly ㅇㄷㅇ다ㅇㄷㅇ아ㅇㄷㅇ아 if I keep going to type, It type infinitly repeat ㅇㄷㅇ다ㅇㄷㅇ아ㅇㄷㅇ아... plz fix this bug ... View more

Using Remote Desktop Client for Windows. For the last few weeks, our Users that have multiple monitors are reporting a problem when moving an application to the other screen, the open applications freeze. Things we tried: *We have tried updating Remote Desktop and rolling-back. The March version 1.2.4066 solved the problem. *Changing the Primary Display to the other Monitor. *Delete the user profile for AVD. *Update the Display Drivers. *We can reproduce the problem on our Windows 11 AVD Server and our Windows 10 AVD Server.   Any help will be appreciated. ... View more

Activating the "try the new client (preview)" option in AVD creates an issue with copy and pasting spreadsheet lines to Excel.   It's copied from a legacy application hosted in AVD that contains spreadsheets. As you can see using the old client it works like expected; it pastes all the lines appropriately into multiple rows. In the new client however the lines get copied into only one row instead. The application is hosted on the same server in both examples, the only difference is the client feature. ... View more

If I am listening to music on my IPad or using the IPad audio in any other way, the Audio is automatically paused when RD Client is first opened and sometimes when opening a window while connected remotely to a Windows PC.   ... View more

 Continuously receiving the error 0x104 while trying to remote into my work device? I have everything set up correctly and still receive the error?  ... View more

There is a serious and very old (goes back years) problem with using Remote Desktop with SteamVR.  Basically it won't work properly, your VR Headset display will not function correctly (in my case it's solid teal until I reboot and access it without using RDP), and also the Oculus app will be unable to access the Oculus Services that it requires, and will fail to run.   What appears to be happening is that while RD is in fact logging into the correct (and only, in my case) user session, some part of it behind the scenes is logging in as "unknown user".  On occasion I have even glimpsed this username being logged-in-as briefly before connection completes.  This causes the Oculus and SteamVR services to fail in some places and just generally causes havoc with VR.   I have a dedicated laptop that runs in another room, which I use for VR.  I access it remotely from a computer in my play room, to keep its heat and noise away from me.  It is extremely frustrating to have to physically walk to the other room and launch things from the machine locally, then come back to my room, and go back & forth every time I need to touch anything within Steam/Oculus app.   Oculus very clearly disclaims any responsibility for this issue and points the finger at MSFT, so I'm hoping you guys can look into and address this issue.  VR  users the world over, will appreciate it. ... View more

Hi,  On MacOs it seems that a mouse drag is not possible when switching from a screen to an other, a mouse click is needed first when moving to an other screen so the drag can work. example : RDP full screen on all monitors, all the monitors showing the desktop. drag a selection  square on the desktop of one monitor, this work, move the mouse to an other monitor, try to do them same (drag a selection square on the desktop), this do not work, you need to do a click in the monitor before so the drag work. this is really annoying when working on several software where often have do to drag selection and switching from one monitor to an other. I am using RDP since many years with the same configuration and I don't remember having this issue before. let me know if this problem can be fixed on my side or if this is a bug. We are several people with this issue. thanks a lot    Configuration : MacBook Pro, RDP connected to a Windows workstation, 3 monitors. thanks ... View more

How can I move my Microsoft Remote Desktop for Mac (version 10) connection list to another Mac. Surely there must be a better way than to migrate 50+ connections one by one. ... View more

Create a DevBox then upload a file.  Then change the file and try to upload it again.  The file won't upload again. ... View more

Hi there,    I work in following scenario:   1. iPad Pro (12,9“, iOS 15.2.1) with Magic Keyboard (Swiss Layout) 2. On the iPad, I use the app Microsoft Remote Desktop 10.3.6 (5090) 3. In the app, I RDP to a Windows 11 desktop machine 4. In the RDP, I use VirtualBox to a Windows 10 VM.   Problem: The Magic Keyboard is NOT recognized correctly in the VM from (4.). For example, the physical keys 1, 2, 3 and 4 will produce the signs „n“, „m“, „,“ and „.“, while other keys do not produce anything. Physical keys like D and F react as if they were arrow keys. Most keys do not react at all.   Note, that the keyboard works perfectly fine on the iPad itself AND on the RDP Machine from (3.). But solely NOT in the Virtual Box (4.).   I don‘t suspect an issue with the language setting, since this problem affects ALL characters (a-z and 1-9) and not the special characters only.   Hopefully, this can be solved soon, since it would be very convenient to work with that keyboard and RDP/VB setting. ... View more

How can you make it so difficult to use Microsoft Remote Desktop, how can it be no-one came up with the idea of simply creating a link and being able to send that to the one that you want to help you through remote desktop. I tried to help my mother with something on the pc, but you made this process so incredibly tedious / difficult that I couldn't manage to get it explained to her how to invite me to control her desktop. Great job guys ... View more

How to remote desktop when Microsoft Account enabled passwordless? Currently cannot login with authenticator in IOS RDP app. ... View more

1. The ability to see the friendly name layered over the connection screen when fast switching between multiple open RDP sessions, in full screen. This will greatly increase the productivity of IT pros who switch many times between many sessions per hour! It will also greatly reduce the risk and frustration of switching to the wrong session. 2. Enable cloud/OneDrive sync of RDP connection documents as a preference in the MSTSC and macOS clients. 3. When right-clicking on an RDP session list item, in the macOS version, add "Reconnect" to the context menu, alongside "Open" and "Disconnect". This is also a major boon to productivity when RDP sessions time out or disconnect.  ... View more