Blog Post

Microsoft Foundry Blog
2 MIN READ

Bring Your Own Telephony to Voice Agents via SIP

ArcherZ's avatar
ArcherZ
Icon for Microsoft rankMicrosoft
Oct 29, 2026

Voice agents in Microsoft Foundry give developers an integrated way to build intelligent, natural voice experiences, bringing together models, agent capabilities, tools, and the platform capabilities needed to move from experimentation to production. Foundry continuously expands channel integration options to serve different organizational needs.

Voice agents in Microsoft Foundry and Voice Live API now support Session Initiation Protocol (SIP), allowing phone calls to reach AI voice agents directly through SIP trunks. This enables low-latency voice interactions while letting you continue using your existing contact center telephony infrastructure.

 

What is SIP - SIP (Session Initiation Protocol) is an industry-standard signaling protocol for establishing, managing, and terminating real-time communication sessions. It is widely used in IP telephony, including enterprise and contact center environments.

Why voice agents need SIP for contact center telephony - Enterprise telephony and contact center environments commonly use SIP-based PBXs, session border controllers (SBCs), and carrier trunks. SIP enables voice agents to integrate with this existing telephony infrastructure for call signaling, routing, and media negotiation.

Direct SIP vs. Customer-managed Audio Bridge - Direct SIP connects voice agents with existing telephony and contact center infrastructure through standard SIP interfaces. In comparison, a customer-managed audio bridge requires customers to build and operate an intermediary layer to relay real-time audio between their telephony infrastructure and the voice agent, typically over WebSocket or WebRTC. This adds integration complexity, potential latency, and operational overhead. Direct SIP significantly simplifies the architecture by eliminating the need for this intermediary audio layer.

Understand the call flow:

Caller (inbound) -> telephony provider or enterprise telephony system -> SIP trunk or SBC -> Foundry SIP endpoint -> telephony binding -> voice agent

Get started with voice agents in Microsoft Foundry

Getting started only takes a few steps:

  1. Open the Microsoft Foundry portal and create a new agent, select Voice as the agent type.
  2. Choose a voice-optimized model and configure your agent's instructions.
  3. Connect knowledge sources and tools as needed for your scenario.
  4. Test your agent directly in the built-in voice playground.
  5. Go to Channels tab -> Phone numbers -> Direct SIP. Add your SIP trunk connection using the same credentials provided by your SIP trunk provider, then bind the connection to the voice agent for inbound calls. (For outbound calls, no binding is required; configure the SIP connection through the SDK or REST API when placing a call).
  6. Copy the SIP binding URL and configure it with your SIP trunk provider to route calls to your voice agent.
  7. Make a test call, then monitor performance using built-in observability and evaluation capabilities.
SIP connection in Foundry portal

Learn More

Updated Oct 29, 2026
Version 2.0
No CommentsBe the first to comment